In this video I build the excellent Copper State Models Erhardt in 1/35 www.vms-supplies.com www.copperstatemodels.com
Пікірлер: 144
@lpjmodels10 ай бұрын
I hope you liked the vid
@Skyraider3D10 ай бұрын
Absolutely nailed it James! Beautiful work. I'm a 1/48 airplane modeller and I am tempted by this kit now! Very cool.
@SprueFascinationChannel10 ай бұрын
Lovely videography , workflow and final result, James 👍
@StaplesandVine10 ай бұрын
A fantastic build as ever. It would look great as a diorama with a couple of figures.... 🤔
@lpjmodels10 ай бұрын
thanks so much @staplesandvine !
@sjaakvandervrande941410 ай бұрын
Amazing 👍👍👍
@lpjmodels10 ай бұрын
thanks a lot ! :)
@ModeliteDiorama4 ай бұрын
just stumbled across your copper state ww1 model videos again and absolutely love them! great references for my ideas!
@Sniper_Cat_7110 ай бұрын
I think your hand painted lettering was excellent. Came out gorgeous!
@lpjmodels10 ай бұрын
Thanks ! I was a bit concerned about it. ( it took 2 goes as well but didn't have time to put that in )
@davidcole3335 ай бұрын
I think a bit more rust around the rivets would have been appropriate and I think the kit needs an engine and a figure or two. You did a BEAUTIFUL job with the paint. I love your black basing technique.
@lpjmodels5 ай бұрын
Thanks David ! I'm a big fan of black basing too. I dont often add a base and figures but I am for the next build. Sometimes the vehicle is enough for me before the next project 😆 I bet these rusted a lot more, like you said, a bit more wouldn't have hurt. Many thanks 😊
@Havco98010 ай бұрын
Love the way the gril turned out
@lpjmodels10 ай бұрын
Thanks ! The 3d part was a good balance of detail and finesse
@SMAZVidoes10 ай бұрын
Great build. The painted vehicle name looks more realistic than decal. This machine seems to the ancestor to the similar looking modern day armored vehicles.
@mmartinu32710 ай бұрын
It looks like MRAP, tall and blocky.
@lpjmodels10 ай бұрын
Thankyou ! I agree
@user-xk4lh9xl7i10 ай бұрын
Great build mate! Thank you for sharing your techniques!👍🏾
@lpjmodels10 ай бұрын
My pleasure!
@ModelMinutes10 ай бұрын
Nice to see those exension tubes are helping get those close ups! That Phot-etch looks crazy! Another awesome build bro! :D
@lpjmodels10 ай бұрын
Thanks mate ! I'll have to start giving you a video credit for getting onto those things 😀
@MarcGray19904 ай бұрын
Now that is how you paint and weather a model! Fantastic build mate! Absolute quality! Love the video and keep it up!
@sd72129 ай бұрын
Amazing! I really missed your builds :)
@DutchDaveModels10 ай бұрын
Nice niche model from CSM. I think they are really the replacement of former WNW in most parts. An engine would have been nice, but this probably will be supplied by aftermarket producers. Excellent build again James. Keep up the good work ✨👍✨
@lpjmodels10 ай бұрын
Thanks Dutch Dave ! I agree. I have the caudron in the stash and it looks amazing. A bit daunting though 😀
@chris_obarski10 ай бұрын
Best copper state armoured car builds out there! Thanks a lot James for this fun to watch video!
@lpjmodels10 ай бұрын
Thanks a lot Chris ! Much appreciated 🙏
@robbo106810 ай бұрын
Another amazing build, James....I wouldn't change one solitary thing.....it's beautifully detailed by your painting and weathering. Always a pleasure watching your work and the wait was definitely worth it.
@lpjmodels10 ай бұрын
Thanks Robbo I'm glad you enjoyed the build 😀
@user-sw9yd1dn7g9 ай бұрын
Your paintwork is excelent Sir
@tomsstuff763610 ай бұрын
Great to see those more "esoteric" armoured cars built in such high quality! Having had the chance to see a somewhat similar (though later) Daimler DZVR 21 in person at a German museum those nearly steampunk aesthetics did leave quite an impression in 1:1 scale as well 👍
@lpjmodels10 ай бұрын
Thanks Tom. I had to Google it and its a total unit ! Love to see it in person
@danmeehan13909 ай бұрын
Nice choice of vehicle. Great work.
@RB55able10 ай бұрын
A beautiful build. I love all the shades of gray you incorporate. Your video work is also well executed. Very inspiring. Thank you for sharing.
@alexviktor797510 ай бұрын
Hello from Latvija!
@lpjmodels10 ай бұрын
hi Alex!
@alexviktor797510 ай бұрын
@@lpjmodels A Great armor car comes out. I am to like Copperstate models. They have good models from the First World War. But you have great skills in painting. Have old are you made models?
@robertbienkowski10 ай бұрын
Great work!
@lpjmodels10 ай бұрын
Thanks Robert
@jonhking557010 ай бұрын
Nice to see a nother model from you James looking forward to seeing some more very soon you should but this one on a simple Sean
@lpjmodels10 ай бұрын
Thanks John, I'll see if I can get round to it !
@runehau110 ай бұрын
Really enjoyed this one.
@lpjmodels10 ай бұрын
Glad to hear!
@richardehrhart674410 ай бұрын
Great build! Love the name of it. Gotta get me one!
@lpjmodels10 ай бұрын
You should!
@lesthiele492110 ай бұрын
That was a totally excellent build, as others have said your presentation style is perfect, bext regards from a Kiwi living in Australia 👌👍👌👍
@lpjmodels10 ай бұрын
Thanks Les !
@guaporeturns94728 ай бұрын
You are definitely a skilled model builder
@lpjmodels8 ай бұрын
Thankyou ! I try my best
@robertlucic759810 ай бұрын
Fantastic James. I have this kit in my stash and am moving it to the front of the queue. Thanks for the inspiration.
@lpjmodels10 ай бұрын
Hope you enjoy it!
@VintageSprueАй бұрын
Absolutely beautiful ❤
@lpjmodelsАй бұрын
Thank you! 😊
@harryhamilton29810 ай бұрын
Outstanding build.
@davidnash122010 ай бұрын
That is super cool brilliant finish and a great subject 👍
@lpjmodels10 ай бұрын
Thanks a lot David
@ScaleHangar18210 ай бұрын
Really nice build.
@lpjmodels10 ай бұрын
Thanks @scalehangar182 much appreciated
@basfinnis10 ай бұрын
Another beautiful finish. Lovely stuff 😉
@TheUncleRuckus10 ай бұрын
This is a super cool build but I'm disappointed there was no engine supplied with the kit, especially since finding a period correct engine somewhere else is going to difficult. It just seems odd to have such a detailed hood/bonnet with all those hatches that could be posed open that there's no engine, seems like if they wanted to go that route it would've been easier to mold the hood with nonfunctional hatches. I like the hand painted lettering on the hood better than the decal tbh, looks more authentic to me. 👍👍
@lpjmodels10 ай бұрын
I understand, as a lazy modeller I don't mind but I can see why it would be annoying. I think also less plastic kept the price down
@ModelkitStuff10 ай бұрын
I love CSM kits and you can certainly bring the best out of them, nice job.
@lpjmodels10 ай бұрын
Thanks mate !
@Marshal97610 ай бұрын
Looks great mate, well done!!
@lpjmodels10 ай бұрын
Thanks a lot!
@laghelach26549 ай бұрын
Comme d'habitude un véritable travail d'artiste... BRAVO !!!
@lpjmodels8 ай бұрын
Merci !
@truthhurts92416 ай бұрын
Hi James, have to say, that is another beautiful model, thanks for sharing it with us. In return I'll give you a little titter. I was avidly watching you painting but thought there was something slightly askew with the model, couldn't put my finger on it. It wasn't until you were putting the decals on that I realised it doesn't have "Normal" tyres on it. I think I had a small "senior moment."
@jbw311810 ай бұрын
Beautiful work, love the modulation.
@lpjmodels10 ай бұрын
Thanks a lot!
@ferbieticklater742910 ай бұрын
Nice one James. As always a great job!
@lpjmodels10 ай бұрын
Thanks Ferbie !
@PGNogueira10 ай бұрын
Excellent as always.
@lpjmodels10 ай бұрын
Thanks again!
@jorgemorfinstoopen10 ай бұрын
Congrats! This process will be very helpful for my next project.
@lpjmodels10 ай бұрын
Thankyou and good luck !
@MrKersey10 ай бұрын
Great presentation of your modelling skills, well done!
@lpjmodels10 ай бұрын
Thanks a lot !
@scale_history558410 ай бұрын
You do such amazing work on these CSM vehicles!
@lpjmodels10 ай бұрын
Glad you like them!
@simonleach663210 ай бұрын
This is yet another beautiful build, looks amazing mate, properly nice job, especially painting those decals on! I'm really tempted to try one of these copper state armoured cars now, every single one you've built on this channel look like awesome kits!
@lpjmodels10 ай бұрын
Thanks Simon, they are great kits, plenty to choose from now too
@marcingalezowski288010 ай бұрын
Nice, I really like what you doing.
@lpjmodels10 ай бұрын
Thankyou !
@jonfoisy123710 ай бұрын
I think your hand painted markings look better than the decals. More realistic.
@lpjmodels10 ай бұрын
Thanks, I was a little worried about it
@jonfoisy123710 ай бұрын
@lpjmodels No worries James. Whenever possible I hand paint or ab markings using masks. Not a big fan of decals although sometimes they're necessary
@scale_jelly_lydon581310 ай бұрын
Fantastic video and a great finish to the kit.👍
@lpjmodels10 ай бұрын
Thank you! Cheers!
@tpaul80210 ай бұрын
As usual, incredible job.
@lpjmodels10 ай бұрын
Many thanks 😊
@danteogilery794810 ай бұрын
Great result 👏
@lpjmodels10 ай бұрын
Thank you!
@wadejustanamerican120110 ай бұрын
Nice build!
@lpjmodels10 ай бұрын
Cheers Wade ! 🍺
@brockbeckstedt64834 ай бұрын
Brilliant!
@allanrichards375210 ай бұрын
A very nice build and I really like the modulation on the grey paint. CSM do some very good models
@lpjmodels10 ай бұрын
Thanks Allan , it came out ok. It's a little more subtle in person but that works welln
@nt_scale_studio10 ай бұрын
Looks amazing!!
@lpjmodels10 ай бұрын
Many thanks !
@oldschoolbiker976810 ай бұрын
Perfect 👍
@lpjmodels10 ай бұрын
Thank you! Cheers!
@sergiovasconcellosocriativo10 ай бұрын
Amazing job! Thanks for share. Cheers
@lpjmodels10 ай бұрын
Many thanks!
@hhyling848310 ай бұрын
really nice model and paint job!
@lpjmodels10 ай бұрын
Thank you! Cheers!
@htc489810 ай бұрын
Thank you.
@lpjmodels10 ай бұрын
You're welcome!
@jimsminimodelsmccrea10 ай бұрын
really enjoyable video, especially the weathering nice one.
@lpjmodels10 ай бұрын
Thank you so much 😀
@jessejones64010 ай бұрын
Great job!
@lpjmodels10 ай бұрын
Thanks!
@roadweary525210 ай бұрын
A little late to the party but it came out amazing! Well done
@ModellingWeekly10 ай бұрын
Absolutely gorgeous work mate :)
@lpjmodels10 ай бұрын
Thanks Mr Weekly !
@OLDMANTEA14 күн бұрын
Applying that decal on the radiator slats would have tested my chi severely
@lpjmodels7 күн бұрын
it wasnt too bad, they fit ok !
@rorogaulois57005 ай бұрын
You and a csM kit it s a wonderful moment in video.I’m fan of your work.But I m angry at you.Because of you I want to buy all the CSM kitseven if I would never have your talent 😊 thanks sir for the great pleausure moment when I see your videos
@lpjmodels5 ай бұрын
Thanks @rorogaulois7500 thays very kind, remember the finished build is only part of the journey 😀
@adrianrichards2476 ай бұрын
Based on the Lancaster that I purchased from CS and followed your build ….and though I say it myself did a more than half descent job …I have now purchased this one ……..so based on the past one …see you sometime in May / June …..seriously though great modelling …..are you going to do one of the CS first WW planes with the struts and wires …hope so
@kiwiruna907710 ай бұрын
Hi James, I like what you have done there, I wish we could get Copper State kits' at a price that include costing me a kidney and it is good to know I'm not the only one with sausage fingers🤨.
@lpjmodels10 ай бұрын
That's a shame, here most are about £30‐40
@saburu7966610 ай бұрын
✌🏼😎👍🏼
@lpjmodels10 ай бұрын
hi Sy !
@derekparnell35749 ай бұрын
awesome looking kit, and as normal a cracking build. When is this one out? And you talk about sausage fingers try the same with oldman hands lol.
@lpjmodels8 ай бұрын
Thanks Del ! I find myself with shaky hands lately. Not good ... it should be out now ish !
@johntreloar820310 ай бұрын
Nice work James, it looks great, needs a diorama base?
@lpjmodels10 ай бұрын
Thanks John. I'll think about it. With low mojo it's hard to stick with one thing atm 😀
@johntreloar820310 ай бұрын
@@lpjmodels Hang in there James, we all go through it, just keep at it and you'll be fine.
@alxandorbond339910 ай бұрын
Ждем'с
@lpjmodels10 ай бұрын
hope you enjoyed it !
@warbirdgamer10 ай бұрын
Can we see some modern jets maybe in a dogfight diorama
@lpjmodels10 ай бұрын
I dont have a lot of modern in the stash. I'm overdue doing one though
@AgentHKG8 ай бұрын
❤❤❤👍🏻👍🏻👍🏻
@user-zw7gp8xb8f10 ай бұрын
🤝🎥👍
@mmartinu32710 ай бұрын
It looks like current MRAP, tall and blocky.
@lpjmodels10 ай бұрын
I agree, it's like we've come full circle
@jlpytlewski10 ай бұрын
At 1:33, looks like the shaft didn`t quite make it to the gear box..?
@lpjmodels10 ай бұрын
I didnt notice, being an early sample of the kit there may have been a few differences to the main release
@waardlafrance11010 ай бұрын
@user-me1ef8ym1c9 ай бұрын
I think I might be going a bit crazy but I have looked at this video on two monitors and my phone and can't seem to figure out how green the model is. Does it look quite green in person or would you say its more overall grey ?
@lpjmodels9 ай бұрын
It's roughly RAL 7010 as a mid tone , it sits inbetween panzer grey and field grey ( like the tamiya shade ). I used a colour picker app from a screenshot to get a rough idea from a photo I know represents the colour well.
@user-me1ef8ym1c9 ай бұрын
@lpjmodels Thanks for the reply. The model looks great 👍