thank you everybody talks about ls swap but never address trans. Thanks

Thank you! I’m going through this debacle now and this information has been a lifesaver!

Thanks for make these videos and sharing your knowledge. Just purchased a 5.3 for $250.00 complete! Everything wiring ecm and all ! And got to hear it run and even talked the guy onto pulling and deliver.

Did anyone else keep scrolling up on this video. Thanks for the video btw. Very helpful

Thanks JR. Nobody cuts through the BS and explains it so effortlessly simple as you do

I must admit my favorite opening sound for the videos is the cammed idle.

I just joined on Facebook group awesome videos man

As I am watching your awesome videos I asked for your help regarding trans hookups bam there it is. You are a great help with ls swapping. I'm a square body truck freek also. Some are Diesel trucks that are going to ls after seeing your videos. Selling all of my old 350 202 motors. Money wise a guy can't build old iron to keep up with the LS motors. Thank you keep posting your information thanks again.

Great video very informative. I also have many older v-8 Chevy Engines .This is my first LS 1 Swap into a 69 GMC 4x4.

Great video, earned my sub. Keep it up brother.

Awesome video very good info I have a lq9 that had a 4l60e so I just need the 551165 spacer to run a th400

Ls $ has the starter mount on the trans, some folks are Modding the oil pan for the starter mound, but prolly just best for the good rods as parts.

Another ls mystery solved before I turn 1 wrench. Thanks

Thanks for all the info, hopefully i only need the itc billet converter adapter sleeve. I have a Fabbot LS adapter for my Barra. Trying to put my th400 behind the Barra.

great video. Love the content!

Thanks for time sharing ur info

Oh and by the way. You are a damn well of knowledge. Freaks me out!

Warren Michigan checking in video #4

Great video my man👍

next time we would appreciate powerpoint doc not a word doc. thanks. the car community

Measurements are your friend. I'm not saying this is in all cases, Sometimes you just trade the bell housing, flex plates and your done. If not listen to this guy, he knows his shit, only thing make some links in your vids to the parts with affiliate so you get something. Good work.

Thanks JR

Top notch man. You know your shit

I want to bolt a 5.3 to s manual sm465 what do I need

Any videos on hooking up vehicle speed sensor, or do you really need it

I want to Bolt a v8 chevy 305 . 5.0 on 4l60e What do I need to make the work I have the 4l60 non e . Right now with that engine... And also wanna say thank you for the information do you provide Thank you very much man and God bless you

For Th400 to dishes 5.3 do you have to add spacers to the convertor bolts too?

What would I need to do I'm ls swapping a 94 chevy 1500 4L60e trans wanting to used the that trans that come in it. 5.3 liter will it work

Gonna try to LS swap my delorean :) I'm thinkin the transmission is going to be the hardest part of the build.

I have a 05 LQ9 trying to install a 4l80e to it, I bought the flywheel but don’t know what bolts I’ll need to install everything.. I bought some apr torque converter bolts for a 4l60/4l80 don’t know if those will work. Any help? Thank you.

Does the spacer go on the engine side of the flex plate or the torque converter side of the lex plate?

Can you make a video using the z bar on 4 speed since Ls don't have that option

If using the oem flat flex plate and oem spacer "80e" stuff to bolt the th350/400 pg ect. You absolutely do NOT need the ict snout adapter

My 2004 lq4 flex plate did not match with the 700r4 torque converter bolts. It was about an 8th of an inch off. You would need an adapter flex plate aswell.

Just joined the Facebook group

Is there anyway to put a 4L60e on a 2000 long crank 6.0

What do you need to bolt tremec 5 speed in a ls

Hello driveway very informational video. Love all your videos. Learn alot appreciate videos. So if I'm understanding correctly I have a 2001 lq4 6.0 and a 4l60e out of a 2002 Silverado that had a 5.3. So all I need is the dishes flexplate and I'm all good. No spacers etc correct?

So I have a 91 4l60 (700r4) and I’m putting a 02 6.0 has the flat 4l80 flex plate so if I use the spacer behind the flex plate do I still use the original starter ? Also what do I do as far as the converter lock up as it’s wired to original pcm ?

ok what does a guy do with the tranny kickdown cable? still need that and the throttle cable bracket?

would I need a module or something to run a 4L80 behind a 350? I wouldn't mind doing this because I love the 355 that I have in the truck right now, its a hot little motor that my granddad and I built for the truck before he passed.... thanks man!

Have a 2004 5.3 using a t350 is that a gen3 motor thks

Do you tune your own stuff? Could you make a video on how to do the tune for your what to buy for $700 video? Really it's the only thing holding us old hold over mechanics from doing something like that! We just don't get how to tune. Thanks bud! Love your vids!

Iam Confused sorry. Wondering what I have to have to bolt a 6.0 to a 4l60e from the early 90s. 6.0 going in to a 1994 GMC Yukon 5.7 with the 4l60e.

What flex pay to use for a 5.7 Corvette motor 2000

In theory can't I just swap the bell on a V6 trans with the flat top? It's a 300mm shaft but completely wrong bell.

Thanks for the video. So I just need the spacer and longer bolts to mate a 2004 LQ4 to a 1996 4L80E?

WHAT DO INEED TO MAKE MY FLYWHEEL FIT ON A 1996 VORTEC 5.7 PLEASE HELP !!!!!!!!!!!!

I have a 2003 v6 that is gonna be swapped to 6.0 out of a 2006 Denali AWD would I need the spacer to use the v6 stock transmission idk what transmission was on the 6.0 it was already gone but could been a 80e

Im about to drop in my 05 Lq9 into my 1970 c10. what stall would you recommend for it. not trying break the bank. looking for anything 2600-3400 . chances are it will stall higher given my gearing tire size and such, I have had good luck with fti in the past. Made the mistake of ordering off ebay and they sent me a dam Bop 350th converter and the gap on the mounting points are insane .

2000 pontiac firebird 3.8 swap LM7 5.3 TRANS ADAPTER

Hey JR, ive done this swap since 1st watching your video and learning how, thanks so what do you do about your pcm trouble codes dealing with TCC? i ve got at least one maybe more transmission related codes P0740,0758,0785, p1860, P1810 i did the LT1Swap harness and deleted all those wires but am i supposed to turn stuff off in the PCM as well? or just live with the codes hoping they dont affect the driveability somehow?

I think if you get the real late vortec T56 transmissions out of trucks, they fit the common SBC bolt pattern

how about the ls1 corvette flex plate? need info for that please. cant find anywhere that says it will work with the ITC adapter.

I want to ls swap my ford crown victoria with a 5.3 ls will it bolt up ? If not can you tell me what i need?

I have a 2003 4.3 4l60e would it bolt up to the 2006 6.0 without any adapter

So how would you address the TV cable on the older 700r4 and 4L60 to get it to work?

bolt up has alot of info what i could have used a video showing how to get my 92 700r4 tv cable to work on my 5.3 drive by cable swap

So I just got my adapter to match the snout on my TH350 to my 5.3 but now I have another question. My 5.3 is DBW and my TH350 has a tv cable so how would I go about adapting them together? Do I need to go from DBW to DBC for the throttle body? Or should I just go with a 4L60E? My TH350 was running perfectly before I pulled the 350SBC and wouldn't need to get a new drive shaft made.

Hey man thanks for the video....learned alot.....I have a question.....I have a BOP th400 that I want to bolt up to a 99 LS1 out of a Corvette. Could you please tell me what I would need to bolt these 2 items with one another. Thank you

Ok so I will apologise in advance because you have never heard this question..but I am swapping a L77 in my RS200 Altezza..it has in a A650e trans and I want to keep it to retain my button shift function,can you assist with the information of what is needed..thanks.

I have a 73 k10 I want to know if ls works with the original manual transmission?

I have a 94 c4 Corvette with the 6 speed zf trans and have a donor 4.8/5.3 truck from 99 and was wondering if that trans will bolt up to that engine? If anyone knows that would be awesome. I've looked everywhere and everyone I've seen do the swap already has the auto trans and uses it from the vet and use a engine from a truck

What about a 5.3 with a older 1998 nv3500? Pilot bearing

Can you do a manual transmission video?

How would I go about fitting up the stock shift linkage on a 74 nova to a 4l60e

I have a 6L80 off A 2010 SILVERADO.Can I use on my LQ4 2003 ? TY love Ur Video

I want to put an LS to a Ford Top Loader

I have a 2004 gen 3 long crank with out original flex plate what part no. Do I need I’m using a 700 trans 3000 stall converter

I want to bolt a 5.3 to a 4l60e out of a 96 V6 Camaro. Is this possible? What would it require?

Just to be clear. I have a 6.0 out of a 06 silverado with flat flex plate Going with th400. So I would need the longer bolts and that gm spacer thats around $50. Let me know. Thanks for all u do

What about starters? Can I take any year LS starter motor and bolt it to any year LS engine and transmission combination? Like if I had a starter off a 5.3 with a 4l65E and I bolted it to a 6.0L with a 4L80E and switched from flat to dished flex plate etc - will the starters all fit? Thanks to anyone who can answer this!

What about driveshaft length I bought Tejas adapters

What about mounting a ls up to a bop transmission?

Can you bolt a gen1 4l60e too a ls?

I have a 1995 S10 that came with a 2.2 and a 4L60E .. Swapping out the 2.2 for a 5.3 , was told bolt patterns are different and I can't use the 4L60E that came with the 2.2... What's my options here... Thank You Would prefer to stay with a Automatic transmission..

I have a 5.3 engine s10 swap from an 02 tahoe im gonna use the 00 v6 4l60e out of from an s10 wich spacer do I need? The one that looks like the ring or the other one?

What flywheel would I need for the 99 6.0 to fit my 01 4l60e? I was told my flywheel off my 5.3 will not work with my 6.0 being its got a longer crank

i just swapped out my sbc/th350 and attached my 5.3 LS to TH350 with the collar/sleeve but the convertor bolts seemed short and i had to suck the convertor away from trannyy about 3/8 of an inch. is that a problem or normal?

Researching an ls swap into an 88 chevy 4×4 manual trans. 5.3 (gen3)...ls flywheel(from a 4.8 manual truck i hear) and the stock clutch is all we need ?...i thought i heard you say flywheel matching engine and clutch matching the trans for manual swaps. If it matters the truck started its life as a diesel

so if i have a 2001 lq4 in a suburban 2500, that has a 4l80e behind it, what parts do I need?

Will a 4l60e or the 4l80 torque converter work with a th350 transmission?

IM CONFUSED . So will a 2003 truck 5.3 LS fit an 84 cutlass tranny?

Hi do you mind helping me out? I have a gen3 6.0 and a 2004 4l60e I removed the transmission to get it rebuilt. when I received the transmission back and installed it..it seemed that the t.c has about 1” of play.when I bolted the flexplate to it and filled with fluid the transmission wouldn’t go into gear or move the truck at all do I need a spacer for this set up? (The t.c is a new refurbished one and the new flexplate is the concave one from a 5.3) and before the transmission went out the truck was running normal no noises at all.

ok i have a 5.7 vortec with the longer crankshaft what do i need flexplate wise to adapt to 200r4?

What about the drive-by-wire hooking it up to the 700 R4 kick down or TV cable

I have a 6.0L LY6 from a 2015 Sierra that I want to match to a 2002 Tahoe 4L60E 2wd. What do I need? Thanks!!

What about manual transmission?

Are there any 4.3 v6 options available, are they the same kool thanks, I’m getting a 2007 I Believe , it might be a 2002 , what ever it is its in a pick up truck, ok kool thanks praise Jesus grace Christ amen 🙏 BigAl California.

I have a 2006 lq4 came out of all wheel denali was planning to put it in my 1989 c1500 pick up which has a 305 and 5ml60 (oem) will the 5ml60 work .?would really appreciate any help and get your opinion Thank you for your videos and all your help

Im stuck on this one in need of help trying to use a 99 4l60e on a 04 5.3 some one please help

I have a 93 c1500 that I want to drop a 5.3 into. Mating the two doesn’t look like it will be a problem, but can anyone explain to me what the next steps would be? Do I need a tcm to run the transmission? Or is there anything budget I can do?

Question i just pulled a 2 piece 4L60E from 2001 van with 350 engine now what do i need to adapt this to my ls series 5.3 engine. I have installed a bigger cam, springs & flat top pistons engine is an 01. Do i need just the spacer for it with ls dished flex plate and do they make an stall that i can use for i will need a 2800 to 3200 stall i believe. Any info greatly appreciated

ls4 that is

Sm465 be like th350,400

Lol, spend the whole video plugging urself.

Too long winded