Hey Guys, Don't forget to like and subscribe if you liked the video and stay tuned for more epic builds and LS related content! Thank you for all of your support.
Пікірлер: 84
@MrYz250fman8 ай бұрын
The yellow wire was for the original points ignition setup. My 68 firebird was the same way. Something about the points only needed a full 12 volts while being started and the other wire that fed the points with the key on the on position only gave it 9.3 volts.
@obs4life22810 ай бұрын
You sir have earned a subscriber. Clean job. If I would have done anything differently, maybe wrap the fuel pump wires in the black wire loom to blend in with the frame. Great job! 👏
@manofreedom Жыл бұрын
Holy cow. I can't believe I found your video. I just bought a 1967 Camaro and I want to do the exact same build on it. I'm thinking of going full resto-mod (more emphasis on the "mod") with the LS swap and a new 10 speed automatic. I want a custom interior update with all the modern comforts.....electric and heated seats, computer and flat screen GMC system, back up sensors and camera, new awesome sterio system. I'm looking forward to watching the rest of your video updates on this one. I just subbed to you channel.
@jlove24 Жыл бұрын
Look up stitched by slick on KZfaq he can do exactly what you want
@manofreedom Жыл бұрын
@@jlove24 Thank you, I will look him up.
@Tire_Smoke9 ай бұрын
I understand, but seeing that beautiful 454 come out brought tears to my eyes 😞
@1969camaro2 ай бұрын
Jesus you people are so overwhelmed with old engine blocks I’m pretty sure he’s gonna keep it. Don’t be a crybaby. It’s the man’s car to do whatever the f he wants with it.
@gordocarbo2 ай бұрын
Me too. Mod for mod that BB will destroy the LS.
@mattmccue51028 ай бұрын
Nice job! Planning a Resto-mod for a daily driver this gives me some inspiration. I have subscribed you are easy to listen too and you don’t waste time with any BS thanks.
@DethMetulEddieTV5 ай бұрын
I’m sold on LS swapping my 81 z28. Thanks.
@dickymillwisdom10 ай бұрын
Great job! Appreciate all the info. Looks pretty easy, but I'm sure there are always some snags. Regardless I learned allot. Cheer!
@GoldenState408 Жыл бұрын
just finished the video - YOU a Badddd Man! very nice job ! Clean
@spacedout106 Жыл бұрын
Great video im gonna use this as a blueprint to ls swap my 72 deville 💪💪💪
@muthagoose69 Жыл бұрын
love the video, great info in there! LS swapping a 68 Camaro pretty soon so this was a big help.
@reeladdictionsportfishing932411 ай бұрын
Great video, very informative 👏 👍
@jayburrough43084 ай бұрын
He's going to miss the TQ from the big block for sure
@gordocarbo9 күн бұрын
Seen more than one do an ls swap and the car cant even break 13s. No way would I give up cubes thats going back wards. The cost, complicating a simple car seems backwards to me.
@ronaldplatts20117 ай бұрын
Great Video and a super clean install. Approximately how much time was the entire swap?
@rchavez50564 ай бұрын
Nice job!!! What intake manifold is that? I thought only an LS1 intake would fit under the hood. Do you know if a 67 and 69 would have the same clearance issues under the hood?
@moochannel5237 ай бұрын
I don't even have a 67' but thank you, Anthony Hopkins.
@joeberan4040 Жыл бұрын
Good job!
@user-nu6gx8sk9p7 ай бұрын
I need the harness and computer for an LS 6.0 engine from 2005
@maconherron14036 ай бұрын
Do you remember how many holes did you move motor mounts I heard you say it was too close to firewall from original bolt up
@jaydaviooo Жыл бұрын
Nice work !!!
@charlesstrickland9769 ай бұрын
I watched the video and I’m doing the same thing with my 67 Camaro and I want more information about wiring harness. Thanks
@austinstout40366 ай бұрын
Wasn’t sure how else to contact you, so sorry for the long message. I’m looking to get my first project car. I’m 19 years old. And i’ve been looking at a 1977 camaro. But I want to eventually LS swap it, to make it just a reliable daily. I have a general knowledge for working on cars. I love working on them and learning new things. But when it comes to LS swapping, i have no clue. I was just wondering if you could point me in the right direction. What is a solid, relatively affordable, and all around reliable LS that is not super crazy and good for just a beginner ? And if you could, what kind of manual trans would be good for it and the car ? Thank you, love the videos
@iCozzh3 ай бұрын
Ls1& t56 no?
@spacedout106 Жыл бұрын
Can we get the link to the sbc-bbc motor mount brackets?
@rumbador Жыл бұрын
Great video I am going to try to do an ls swap too on my 69 camaro. What headers did you use? I didn’t understand my bad Thank you
@rumbador Жыл бұрын
Can you share the S10 headers part number thank you again
@rumbador Жыл бұрын
What year s10 headers Thanks
@BrokeBoyz_Garage Жыл бұрын
Part Number: PTE-H8073
@Brandon_obs_ls5 күн бұрын
@@BrokeBoyz_Garagehow much they cost
@alchapel99Ай бұрын
Like your work I have a 68 camero with a 327 would like to swap to an LS note my camero is the same condition as the red as Camero you did a while back what do charge for complete swap thanks Alex
@renevelazquez8407 Жыл бұрын
I am so impressed!! I have a 1967 Firebird that is dying to get your attention. How can I get ahold of you?
@BrokeBoyz_Garage Жыл бұрын
Just let me know what it is your needing and I can help you out
@TheHsan227 ай бұрын
Was thinking same for my stock 67 400 'Vert... would be a nice upgrade.
@melvinbonilla865 Жыл бұрын
Awesome video and great build! Very informative. How do I contact you for the harness? Im also swapping a ls into a 67’ Camaro
@BrokeBoyz_Garage Жыл бұрын
You can email me at nick77noble@yahoo.com Make sure to put in the subject ls swap harness so I’m able to find it
@GoldenState408 Жыл бұрын
hey just subbed to your channel - appreciate the video. can i ask you ya where you are located? do you take on projects?
@BrokeBoyz_Garage Жыл бұрын
Ohio and not normally! Just depends on the deal
@Brandon_obs_ls3 күн бұрын
@@BrokeBoyz_Garagedo u have a link for the headers
@davidpanella98984 ай бұрын
Wanting to use 02 Corvette 5.7 in my 69 Camaro- do you think the stock accessory setup will work ? I'm thinking it should be more compact and I prefer the look ..thanks for sharing !!
@mavcar388 ай бұрын
What external fuel pump did you use? Thanks
@braedynschader50837 ай бұрын
Do you have a link for the harness that you sell?
@rickblood86539 ай бұрын
Are you still selling the wiring & tuned computer?
@roywarren62752 ай бұрын
Was there a specific year S10 headers you ordered for this swap or can you please share that info. Thanks
@ozcorr9097 ай бұрын
nice build man ,whar headers are you using?
@michaelbeeman415110 ай бұрын
What kind of money does it cost for a engine and labor to convert a 67?
@randallpayne8054 Жыл бұрын
How did you raise the engine so the oil pan isnt on the crossmember? i am having same issue right now. Is there a simple solution?
@BrokeBoyz_Garage Жыл бұрын
It’s an aftermarket hot rod pan!
@JohnSutton245 ай бұрын
@@BrokeBoyz_GarageWhere could I purchase one of your stand alone harnesses?
@Brandon_obs_ls5 күн бұрын
@@BrokeBoyz_Garagedo u have a link for the headers
@donaldhenderson32626 ай бұрын
Can can I contact you about doing a swap?
@fabianvaladez773411 ай бұрын
Hey man want to purchase the harnesses with tune how can we make it happen
@fabianvaladez773411 ай бұрын
I want to buy the harness can you give me your information
@edchamberlain807310 ай бұрын
👍
@juvenilebuilds9776 Жыл бұрын
Where can I buy the harness and computer??
@Steven-cq8nv9 ай бұрын
I need a Ls3 harness and computer for 69 Camaro how much?
@lukeandolino8768 Жыл бұрын
Do you use those same mounts for the OBS build??
@BrokeBoyz_Garage Жыл бұрын
Yeah man!
@lukeandolino8768 Жыл бұрын
@@BrokeBoyz_Garage thanks for the response man! I’m about to swap my ‘90 and I’ve heard how easy they are to swap, but i know there’s gonna be those “ have to have” parts in order to make it possible. You’ve done a really good job getting in depth with the OBS. Really looking forward to the future OBS videos and have enjoyed them so far! Seeing stuff like this Camaro is pretty awesome too!
What headers did you use? I know you said the s10 but i cant find em…
@thaynebrayton7761Ай бұрын
I need a harness
@thaynebrayton7761Ай бұрын
Where do I find the parts list
@chevrolet3557 ай бұрын
I did a ls swap on my old 56 chevy truck. I had a friend disable vats but everytime i would start it, it would run like shit and die everytime. Have no idea what it was from
@saleen21027 ай бұрын
It's needs a tune not just the vats taken off
@Jackdagger-fo2rs14 күн бұрын
What do you charge to put ls2 in 69 camaro
@jeremybocage83717 ай бұрын
Hey! Can i get a wire harness from you? Do you have an email or link?
@user-wp1ur9zm1w Жыл бұрын
What year of the S10 truck did you order the long tube headers for your swap ?
@dallaslehr889311 ай бұрын
I dont think those are long tubes.
@trentdawg2832 Жыл бұрын
You might as well start putting some money aside and start saving up for a terminator x…….trust me….them factory ecu’s suck balls…..nice job on the swap though…it wont be long until you put that terminator x on along with a couple PSI of boost……it usually snowballs that way!!!…..ask me how i know
@sschevmale24 Жыл бұрын
What tranny did you use ? Did you need to midfy it
Hi Nick , had some questions about my first ls1 swap on a 68 Camaro and possibly purchasing the harness and pcm from you . Please check your email.Thanks .
@thomasr2046 Жыл бұрын
Promo_SM 😚
@user-nu6gx8sk9p7 ай бұрын
I need the harness and computer for an LS 6.0 engine from 2005