LS4 Tech: B&M Pro Ratchet & Stealth Pro Ratchet

No video

LS4 Tech: B&M Pro Ratchet & Stealth Pro Ratchet

Рет қаралды 11,604

LS4 King

Күн бұрын

Пікірлер: 29

@351Cpowered 7 ай бұрын

This is a great overview, explanation, and demonstration video for this shifter.

@lincoln61 2 жыл бұрын

Any chance you sell the bracket for the 4T65E-HD trans or have a picture of it? I think this shifter is a good option for my Fiero.

@onmygrind3854 Жыл бұрын

What about a transbrake?

@JohnReynolds661 2 жыл бұрын

Thanks for the explanation!

@LS4King 2 жыл бұрын

Thanks for watching

@DustyKnight1995 2 жыл бұрын

I'm getting one for the build

@nesteezy4884 Жыл бұрын

I see the shifter doesn’t have a light where the gear markers are. does it Hook up electronically to show what gear it is on your dash though

@designamontanagarage5400 Жыл бұрын

Hi i have a 07 ss impala that i would like to swap to this style shifter but i see that your sifter is only mechanical but mines have the interlock shift solenoid part of the assembly do you you have any advice

@marcodosal1726 2 жыл бұрын

Can you do a step by step tutorial for install? Also, do you have links for the correct brackets and wires needed to properly install a B&M shifter on a 4T65E.

@LS4King 2 жыл бұрын

This is something I could consider in the future. I’m not really setup for step by step videos at the moment, but I’ll make note of the interest!

@marcodosal1726 2 жыл бұрын

@@LS4King Thank you for your response. Do you at least have the brackets that are needed for this build? I looked at both the links under your vid and your LS4King store. I was unable to find them.

@LS4King 2 жыл бұрын

@@marcodosal1726 for the 4T65 I currently do not. I am working on bringing a few things to market and thats on the list!

@marcodosal1726 2 жыл бұрын

@@LS4King okay I understand, thank you so much for taking the time to respond! I’ll be ready when y’all do sell them!

@be8zywordpl8y68 10 ай бұрын

😂 we have that same Milwaukee radio

@danielfontanez2916 Жыл бұрын

Hi can this ratchet shifter be installed on a 2012 Honda civic automatic?

@CDC-Vprototype 2 жыл бұрын

So I have two 4T80E transmissions and I was wondering how much it would cost to rebuild one of them or both cuz I'm doing a twin charged fwd Northstar build and I'm trying to take the best elements from the most experienced front wheel drive car guys what do you think would work best

@littledeel 11 ай бұрын

Eye roll

@speedy1737 2 жыл бұрын

What kind of steering wheel and quick release are you using?

@w41duvernay 2 жыл бұрын

How would you confirm the 4t80 trans is actually from the 90s STS with the 3.73 axle ratio?

@davido3497 2 жыл бұрын

Ideally you should Run the VIN# of the vehicle to accurately identify what gear ratio and type you have. The secondary hardest option is to pull the final drive out and count the teeth, this will identify what ratio you have, you can also identify if you have a first Generation 80e if it has a external range switch which is a black module box located on the top of transmission housing, 2nd generation is a internal modulated system and does not have a visible module when inspecting the exterior of the transmission.

@TheGanderss 2 жыл бұрын

Will this fit my 2006 Grand Prix GXP? Love your vids and thanks for keeping the LS4 platform on the map!

@littledeel Жыл бұрын

😂

@KORNF3D 2 жыл бұрын

Do they make this shifter in the reverse pattern? Say for a fiero?

@davido3497 2 жыл бұрын

Most people who run a ratchet shifter and need it to run backwards will order what’s called a (reverse valve body) most manufactures offer this item including B&M generally you have to request it to be a reverse pattern.

@LS4King 2 жыл бұрын

All B&M Pro Ratchet shifters are forward and reverse pattern compatible by default. No need to call anyone. “Reverse Pattern” valve bodies do not exist for the 4T80E or the 4T65E. Despite the engine being behind you in the Fiero application; It is still a “forward pattern” valve body. You’ll just need a longer cable. If you meant to ask about a rear cable exit model like some of the gated shifters offer; No, the Pro Ratchet is not available with a rear exit.

@KORNF3D 2 жыл бұрын

@@LS4King the rear cable connection is exactly what I need.

@LS4King 2 жыл бұрын

@@KORNF3D is there any reason you cant come out of the shifter in the front with the cable, loop it somewhere under the dash not to kink the cable, and run it down the door sill to the rear?

@KORNF3D 2 жыл бұрын

@@LS4King really isn't room for that. Plus having to loop a cable around the front past the cage sounds like a mess. Last few years I've been looking into a tci outlaw shifter. They had a rear cable setup.