Thanks Oxide!!!

Test the militech Maritime helmet !

>shilling pavel omega based

@@coyote-son9836 I think others have gotten to it before. I get requests for militech helmets a lot but they have been well tested.

@@Oxide_does_his_best Try out to obtain Vulcan-5 (LShZ-5), I think you will be not disappointed. This fucker can withstand not hardened 7Н1 bullets from PKM, as far as I saw. But it will may be the hardest thing to get. I saw just one on sale... In Russia... For 1500$... But still, i want to know what you think about it.

this joke made my day man haha

Nine mil kills the body, but .45 ACP kills the soul.

And 45 APC’s turn the body into mush and obliterates the soul

@@i_eat_lead4623 I think just 1 would do that.

Point blank too.

Don't feel bad I started questioning wether I had been saying it right 😆

I was wondering, my helmet holds up fine against 45 armored personell carriers regularly.

Right when I was saying to my self "45 apc ?" I saw this comment.

@@Utubebinge same

Automatic Pistol Colt.😂

US military doing something good? I doubt it

wouldn't be surprised if they were. The fact he keeps getting these newer helmets, either means the Russian military can't stop their soldiers from selling their gear, or somehow the US military is helping him sneak these helmets out of Russia

@@halzan7467 Tors are sold commercially. LZSH is a different story however.

@@halzan7467 Plenty of russian helmets are sold because it's really not that important technology wise. What cost them maybe $100 can sell for over $500 here. (sweet titanium pot is best) I wouldn't be surprised if certain units were tacitly allowing it just so people get some extra money for end of the month buterbrod.

@@EcchiRevenge As far as I'm aware there is an export ban for ALL Russian armor, none is supposed to leave their country

So the ricochet chance Escape from Tarkov has for helmets might actually be real And apply to rifle rounds?!

@@paulbarclay4114 I thought that Team Wendy's ballistic would stop rifle rounds too? Or OpsCore

@@chloe4587 Team Wendy helmets are rated 3-A. The Team Wendy website explains the breakdown of what 3A is capable of and rifle rounds surpass it. As for OpsCore they are rated the same. Usually most bumps are going to be used more as non ballistic protection (fall protection, debris etc.) or just as a platform to mount nvgs and ears.

@@paulbarclay4114 you're wrong - tarkov is literally real life.

@@paulbarclay4114 yea I seen a guy selling them for 500 recently, I have 1 and it's a nice helmet.

Just imagine a 1911 shooting out little APCs every time I say it.

@@Oxide_does_his_best bro you said it like 4 times too LMAOOO

he has 45 armoured personnel carriers

@@Oxide_does_his_best Mini BTRs :)))

Obviously it stands for "Armor Piercing Caliber"

What do you think he means by that?

confirmed.

Song after that - Pilotredsun - Greetings

Loved opposing force

@@not_ryuka was hyped to hear some pilot, especially from that album

Chad

Song at the end?

So if you were wearing it the results would be better right?

@@vantave9946 i guess so? Layman terms is energy transfers to the rest of your body and neck snapping towards a direction.

@@vantave9946 yes

​@@vantave9946 Yes. Modern helmets are not firmly strapped on to your head and are instead suspended over and around it with a webbing system. When hit, it lets the helmet's materials deform without cracking your skull (like seen on many videos), but also allows for some movement that can also absorb/redirect energy from actual penetration. In addition, the suspended nature of the helmets give some good bump protection (and ventilation).

and let's hope in ends real fast and we start using full face helmets and low cut helmets.

@@ishitrealbad3039 protection vs mobility, it’s more useful to have a light helmet than one that covers a bit more. But that’s just my opinion

Buy me one

@@Oxide_does_his_best I am a patreon at least 🙃 haha

@@dewlittle1211 If you google neosteel, what I refer to is available and instock for civies

@@dewlittle1211 yup exactly. Green tip rated

This test is coming up next

Funny enough, most shrapnel have the penetration potential of a 45.ACP or even 7.62 soft point. The only difference is the shape but its save to say that with most helmets do far tested here a flat surface area on these helmets would have provided fair penetration potential for any kind of fragments. Kevlar helmets simply arent that good.

@@LocalDeepstateAgent + now more and more airburst ammunition etc use tungsten framgment which will enhance penetration

Дружище, есть куча таких же роликов от наших, большинство кто снимает из западных про что то русское, это эмигранты и часто даже не из России, а стран бывших союзных республики в большинстве случаев они специально засирают все отечественное при этом очень часто даже не разбираются или специально вместо русского показывают китайские или восточноевропейские реплики, например украинские. Западное же всегда хвалят и превозносят.

@@pushistiykot5305 Возможно ты прав, но лично я ни разу еще не встречал западных блоггеров о которых ты говоришь. По поводу наших ребят: если скинешь названия каналов, где такой же качественный контент, то буду рад заценить

Для западного зрителя вероятно интересно все иностранное по очевидным причинам. А какой смысл, например, россиянину, который пусть даже любитель, смотреть оценочный обзор какого нибудь 6б45 или гранитовской плиты, если это все давно и успешно воюет в нескольких странах параллельно и проще уточнить из первых рук как оно работает? Плюс, иностранцы любят смаковать всякие детали и скрупулезно сравнивать какие то технологические или иные отличия, а потом все это до дыма классифицировать - чего только стоит их миллион модов для ак выпусков 48-53 годов, наш зритель как по мне такой ерундой не страдает, а если и хочет знать детали, то те, которые действительно важны пользователю, например какие то нюансы из нсд и подобное. Поэтому их и наш контент отличается.

@@bigbonk52 да, культ калаша есть в США, надо немного поправить что вообще практически все каналы с таким контентом именно американские, в Европе почти везде оружие запрещено, но когда дело касается русского оружия очень часто этот контент пилят предвзято, или выдают за настоящее, китайские и другие реплики, то просто страйкбольные копии тестируют, или выдают старье снятое с вооружения лет 20 назад за то чем якобы вооружена армия. Про свое они же начинают петь хвалебные песни, а ещё момент если начнут показывать, что например новый американский шлем точно так же не держит огнестрел, на канал может прилететь страйк. Хотя есть там и адекватные конечно люди, и годный контент, но большинство именно такого низкого качества.

shut up boot

Calm down

It was very recent. I think it was only a year older than the video

The problem with this is that there are hi, mid, and low cut weight differences. If the helmets weigh an odd amount compared to others I'll point it out.

They should have the same profile as an opscore FAST roughly

It's good for cheapo night raids.

The 1+ is the same shell as the army helmet. So... yes, interior troops are using bad helmets

@@Oxide_does_his_best Then they must have decided mounting extra shit(and less weight) was more important.

@@EcchiRevenge I'm honestly not convinced that they know what they're doing.

@@Oxide_does_his_best It seems to be a stopgap solution to cosplay with the then-new fad helmet.

@@EcchiRevenge I mean, a fair amount of their budget seems to be going into modernisation of equipment, so I reckon with some time they’ll be rocking better helmets once they’ve sorted out actually giving out body armor

I wish someone would actually try this. It could work if you could figure out a good binding agent and used enough layers.

@@Oxide_does_his_best I mean, you probably could but I don't know where you'd be able to get aramid fabric. We could try different glues from superglue, gorilla glue, just duct tape, etc. Could be a doable experiment if you found a good source of aramid. Scav house in sunken village in Shoreline always spawns aramid so I suggest start there

@@BusterBuizel I have a ton of aramid left from armor I've shot

@@BusterBuizel Armor grade aramid is often unregulated in many countries, plenty of suppliers. I'm currently making my own UHMWPE plates, not that hard. I'd go for that instead of aramid for helmets, but making a helmet doesn't seem as easy. I need to nail down some details before jumping into the clusterfuck of helmets.