I have a 97 trans am . You can repin your factory harness to a gm p01 pcm connector (most people call it a 411 pcm) you can get them pretty cheap from a wrecking yard from like a 2001 express van. You use the low reference from the opti for cam sensor and the crank sensor for crank reference instead of opti. Hptuners can program that pcm. All together I'm in it for like 200 dollars 96-97 have a 4x crank trigger. If you have an earlier lt1 your gonna need to get a front cover and trigger wheel from one.
@LSxMotorsports20217 ай бұрын
Great info.Thanks.
@mfavingerfv22026 ай бұрын
Thank you 🙏 got a 94 I wanna swap
@maldo729 ай бұрын
Great info ... wanted to mention another option if you have a good optispark is an LTCC system .. or if you are really handy you can convert to 411pcm using a 96-up cover and relutor wheel.. this converts it to a batch fire system with no need for a rear distributor ....
@LSxMotorsports20219 ай бұрын
Thanks for the info.Seems like there is alot options available for these cars.
@fahadk4191 Жыл бұрын
Please keep making these videos on these f body camaros!! Very informative 👌🏽👌🏽
@LSxMotorsports2021 Жыл бұрын
I hope to make many more and try to make them better.Thanks for watching and leaving us a comment we really do appreciate it.
@DukeSky5 ай бұрын
I am running the Dyna Spark and the LTCC on my 93 40th Convertible 383, AFR, Edlbrock intake, Procharged, Volvo electric PS, Electric water pump riding on a complete RideTech coilover system.
@LSxMotorsports20215 ай бұрын
Sounds like a bad ass car 👍
@Jpilgrim305 ай бұрын
I have a torqhead 24x kit just waiting for me to get some time to do trick flow heads, cam, roller rockers, etc. About to really wake this thing up. Can’t wait to be able to tune my own car finally
@LSxMotorsports20215 ай бұрын
That should be a great working car when you get it finished. When you get everything done and start tuning if you get the chance come back and let us know how easy it is to tune with the torqhead setup and if you had any issues. Thanks for watching and commenting we really appreciate it.
@surfjat15 Жыл бұрын
so here’s the thing: my understanding and research would the most cost effective to be get a some what name brand opti, open it up, lock tite every bolt and rtv seal it… then also get an electric water pump which eliminates the weep hole on the mechanical ones that drip onto the opti!
@LSxMotorsports2021 Жыл бұрын
Yes that would work.I don't think an electric water pump is needed though.There are videos on KZfaq showing how to add venting to the non vented Opti sparks.Thats the biggest thing is getting ventilation to the non vented optispark.The air flow will pull the moisture out which is the biggest cause of failures.
@Someguy65718 ай бұрын
You know instead of going and spending a ton on trying to put and electric waterpump on you can just tap the weep hole and put a barbed fitting and run a hose
@Alss3832 ай бұрын
Im going to delete my opti spark for a Torque head 24x or EFI connection. For now i use the MSD lt1 distributor and when it fails i get it repaired instead of throwing it away. They fail just like others do but its the only one that lets me drive home when it starts failing.
@LSxMotorsports20212 ай бұрын
Yeah we have the torque head 24x on its way for the Black 94 Z28 that is on the channel.
@user-yz3ul9ny7j3 ай бұрын
93-97 cars are not that desirable because of optispark issues. I should know my 94 firebird has been off the road the past 8 years due to three bad optisparks.all the aftermarket optisparks are somewhat sketchy. Also gen 2 lt1 engines are a pain in the ass to work on especially in the f body. Recently i been trying to get in touch with Torqhead to buy one of their kits all i get is thier voice mail.
@LSxMotorsports20213 ай бұрын
Well we just recently ordered the torque head 24x. Be a month or so and we will have some videos on the kit.
@user-yz3ul9ny7j3 ай бұрын
Great like I said I been trying to get one of their kits . I call their number and all I get is " leave a message and we'll get back to you. This has been going on for the past six months what did you do to get one of their kits?
@LSxMotorsports20213 ай бұрын
I sent an e-mail with a bunch of questions and he answered about 3days later. It does say it will be 3-4 weeks after ordering before it gets shipped out. But once we get it I will post a picture on the channel and probably not long after that we will have a video. The owner of the Z28 is pretty anxious to get this installed. I am anxious to see if it can be tuned as simple as my LS1 Camaro.
@user-yz3ul9ny7j3 ай бұрын
@LSxMotorsports2021 well like said I left a ton of emails to his site and gave them my email alddress and phone number. I too want to get one of these kits ,just having a hell of a time trying to get hold of them. I don't have the money or time to do LS swap
@LSxMotorsports20213 ай бұрын
Well we will let you know how it turns out. You never know maybe we will never get it. I hope that's not the case but it will definitely end up on the channel if we don't get it and have to fight to get our money back. Not sure why you're not getting a response. This will be the first time ever dealing with this company so I can't say anything good or bad about them although it is irresponsible not to answer a potential customer.
@f1100turborr4 ай бұрын
LTCC was my choice for my 92
@LSxMotorsports20214 ай бұрын
That seems like a good solution and it's great they included the 92-93.
@illestcamaro Жыл бұрын
any way you could tell me how i could check if my motor has a cam in it, without tearing it apart?
@illestcamaro Жыл бұрын
lt1 by the way. bought off a dude and swapped it but it runs “rough” and everything’s been refreshed on it.
@LSxMotorsports2021 Жыл бұрын
The best indicator is a rough or choppy idle which is almost impossible to tune it out.Just search for Cammed Camaro on KZfaq and listen to the videos to see if yours sounds similar.The bigger the cam the more choppy it will sound.I have videos on our channel of my camaro idling which has a small cam.Just check out several videos of cammed cars and compare their sound to yours.If your having trouble with stalling then it is either tuned wrong or there is a problem somewhere.
@CaseTheCorvetteMan9 ай бұрын
@@illestcamaro if it didn't have a cam in it your valves wouldn't open and the engine wouldn't run.
@marknowakowski659017 күн бұрын
The only option is to eliminate the dang things.
@NJRangerGeorge Жыл бұрын
Does the petris work on the 97
@LSxMotorsports2021 Жыл бұрын
Yes they make both the spine drive for the 93-94 Fbody and the Pin drive for the 95-97 Fbody.
@NJRangerGeorge Жыл бұрын
@@LSxMotorsports2021 oh ok thank you in glad I found this video it's good to know a good product I can use if my opti ever goes bad
@LSxMotorsports2021 Жыл бұрын
Yeah I think it is a good product.They installed one on a C4 Corvette a while back on Legit street car.If you have a 97 you may not have too many issues anyways.I think it was the 93-94 that had most of the problems
@NJRangerGeorge Жыл бұрын
@@LSxMotorsports2021 oh ok thats good to hear yea I have the 97 30th z28 red and black with a aftermarket ss hood. It's stock with just a k&n air intake
@LSxMotorsports2021 Жыл бұрын
Great car.The SS hoods on these cars look awesome.Definetly the best looking of the 4th gen Camaros.
@scruffy744311 ай бұрын
efi connection 24x conversion lt1
@LSxMotorsports202111 ай бұрын
Yes that is a good upgrade.I wasn't aware of this product,Thanks for letting us know about it.
@Someguy65718 ай бұрын
A waste of money if you ask me. Also you still need the opti because of the crank sensor. Nothing wrong with the opti if installed and maintained carefully
@volt101x5 ай бұрын
The best option is to get an L98 TPI 😂
@LSxMotorsports20215 ай бұрын
Haha. That's a good one.
@realixx7929 Жыл бұрын
Why would the torquehead 24x not work on the 93 lt1 firebird
@LSxMotorsports2021 Жыл бұрын
That's what I was hoping someone would answer.I am not saying it won't work on a 93 but on their website it is not listed for the 93 fbody's.
@alexl9334 Жыл бұрын
Optispark 92 and 93 have some weird drive thing. The newer ones use a different pin to use it. You can probably change the timing chain cover and all that to a 94 and up style and then do the install
@joelpierce39409 ай бұрын
92-93 have spline drive for the cam. Also 93-94 are OBD 1.
@alreynolds715211 ай бұрын
My 1992 Corvette opti spark just died after 2 yrs !!
@LSxMotorsports202111 ай бұрын
Sorry to hear that.It does happen especially on the earlier cars that don't have the venting.If the car is in really good condition you may want to get an upgraded version.But if your on a budget you could get a stock replacement and convert it to a vented Opti.There are videos here on KZfaq that show how to do it.It doesn't completely solve the Opti problem but it can prolong the life of it.
@CaseTheCorvetteMan9 ай бұрын
The best one to use is the factory fitted original unit (not the AC Delco replacement) followed straight up by the Petris. MSD is shit, and fails for the same reason as all the cheap ones do, the sensor dies from heat. I've used loads of Petris units and never had a single one fail. The original factory units also don't fail, a simple clean out and new cap and rotor, they always work. You can use the MSD cap and rotor kit on the earlier spline drive and this adds the venting. My factory original lasted 29 years and was still working fine when i removed it. I've seen a fair few non vented units go well over 100,000 miles without being touched. Corvettes had LT1s from 92-96.
@LSxMotorsports20219 ай бұрын
Good info.Thanks for sharing.
@Alss3832 ай бұрын
The autoparts stores sell garbage opti sparks. Even if it has a lifetime warranty its not worth it.
@LSxMotorsports20212 ай бұрын
I agree. The owner of the 94 Camaro on the channel found that out the hard way.
@Alss3832 ай бұрын
@@LSxMotorsports2021 I'm getting my MSD distributor back and for $250 MSD installs a new cap and rotor, new MSD opti spark sensor, bearings and includes shipping. The benefit I get from the MSD units is that I'm able to drive home when it fails. I'll eventually upgrade to the Torque Head when I build a 383.
@LSxMotorsports20212 ай бұрын
That's great that MSD stands behind their Opti spark.We just installed a torque head on a 94 Camaro and it was pretty pricey. We ran into a problem that I hope we get fixed in the next day or two. Waiting for a part but I will explain in the video what went wrong. But I was able to download the tune from the new PCM that came with the torqhead and I am pleased to say it is going to be very easy to tune it with HP tuners.
@miamibitch305fl Жыл бұрын
Is dynaspark still in business? Just tried to call and the auto operator was not working.
@LSxMotorsports2021 Жыл бұрын
That I am not sure.I checked out their website and it didn't seem to be working.That is enough to steer clear of them.