No video
LTWK FAQ: Grinds
Рет қаралды 7,180
Күн бұрынLearn about the different grinds we use for knives. We talk about scandi, saber, flat, and convex. Share your favorite grind in the comments section!
@Primitivebearknives 4 жыл бұрын
My two favorite grinds, flat and saber!
@kidbach 4 жыл бұрын
I concur!
@GeneHouse 2 жыл бұрын
Love Flat, saber stinks. It is a grind without a purpose. Flat is a better slicer, Scandi is better for wood processing.
@GeneHouse 6 ай бұрын
You’re right, it’s a compromise! @Butch_Deezlsteak
@joshlindsey296 4 жыл бұрын
Great stuff LT I use my convex 3v GNS all the time love that knife its usually between it and my forest trail in A2 love them both
@daryooshfatemi 4 жыл бұрын
My preference for outdoor blades is a high sabervex all the way down to zero edge. Then a full height true zero convex. And third, a true scandi on a relatively thin blade. 🔪✨
@kidbach 4 жыл бұрын
I'm partial to flat and sabre but, my Bushbaby with it's convex grind is the best of both worlds.
@bosse641 4 жыл бұрын
Really like these info videos.
@amos3106 4 жыл бұрын
Saber hollow and Full Convex!
@wyldebill7248 4 жыл бұрын
Good stuff! Great info!
@spider5001 4 жыл бұрын
Scandi💪🏻💪🏻💪🏻
@MountainRaider 4 жыл бұрын
Scandi and flat!
@GeneHouse 2 жыл бұрын
Yep, you're right!!!!
@chazlyle41 4 жыл бұрын
I tend to very generally match a grind to the intended use / size of the blade. A Next Gen would be great in a Flat Grind for finer whittling and food prep. A Genesis or Gen 5 would be perfect in a Saber Grind as I’d intend to do both small food prep and feather stick work as well as larger wood processing and batoning. Multi-purpose size blade gets a multi-use grind. I prefer a Scandi on a larger blade that I intend to Baton and Build a Shelter or Process a lot of wood with. No need for fine detail work. Just a work horse that can handle the task. The longer the blade the thicker it needs to be to take a heavy beating.
@benfox9208 4 жыл бұрын
Flat grind and Scandi for me
@GeneHouse 2 жыл бұрын
You nailed the two best grinds. Saber sucks.
@wayned5872 4 жыл бұрын
Very good insight on grinds , thanks
@thomassullivan6016 2 жыл бұрын
It all depends on the use????, Just like any other tool.
@jamesshaw1602 Жыл бұрын
I LOVE a Bark River knife - in concept. Then, I hear there’s quality control issues. NOW, I’m falling in love with LTWK. How’s the QC? If I spend 300ish on a knife, it MUST come sharp and well assembled. No loose pins, no blunt blades, no loosening handle scales, etc… what say you?
@LTWrightKnives Жыл бұрын
We are very proud of our knives and feel their quality stands on its own merits.
@kentnorman5461 4 жыл бұрын
That’s why I have all of them 😋
@markjg2275 3 жыл бұрын
They did not mention their rarely used Hevi grind or High Saber grind blades .
@LTWrightKnives 3 жыл бұрын
The grinds on the Hevi models and the high saber use the same technique as the standard saber and scandi grinds
@adrianotero7963 3 жыл бұрын
Very interesting discussion.......one question for you gentlemen......can you sharpen a convex edge on a river rock ?
@LTWrightKnives 3 жыл бұрын
Yes, It might not be as pretty as a factory edge but if you’re down to sharpening on a rock, you are probably not concerned with pretty, just function. Just get your burr and strop it.
@Hootyhoo-jq9vq 3 жыл бұрын
I sure wish they could some of these on the shelves so i could buy one.
@thomassullivan6016 2 жыл бұрын
It all depends on the use????, Just like any other tool.
LT Wright Handcrafted Knives
Рет қаралды 1,2 М.