Lucas Heavy Duty Grease Gun Unboxing and Demonstration

Рет қаралды 21,301

Күн бұрын

Lucas Oil Heavy Duty Pistol Grip Aluminum Grease Gun L338 unboxing, setup, and use demonstration. Demonstrating with Lucas Red n' Tacky #2 NLGI grease.
Disclaimer:
Due to factors beyond the control of Manypoints, Manypoints cannot guarantee against improper use or unauthorized modifications of this information. Manypoints assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Manypoints recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Manypoints, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Manypoints.

Пікірлер: 40

@familydivett1047 3 жыл бұрын

Grow a third arm! Always the best option 😉

@many-points 3 жыл бұрын

Haha absolutely!!

@hazi_official1182 3 жыл бұрын

Thank you

@POW2000 2 жыл бұрын

I just brought a grease gun...there is freaking no way I would have figure out how to install the grease in the gun itself...so thankful for your clip!

@kelleygrove766 3 жыл бұрын

Thank you mister! Step by step works amazing !

@many-points 3 жыл бұрын

No problem!

@inmyimage1081 3 жыл бұрын

So much better than Lucas’ video! I didn’t even mention the release valve and the paper directions are worse than their video. As Charlie Brown would say “Good Grief!” Sounds weird but thanks for reminder on properly applying the Teflon tape. I frequently screw it up and have to redo it 🤣😂🤣

@many-points 3 жыл бұрын

Thanks! Yeah I found the Lucas video to be lacking and thought I could make a more helpful video. Glad it helped.

@cleanlife1305 3 жыл бұрын

Excellent setup video. Thank you!

@boehning Жыл бұрын

This was perfection. Quick and clear. THANK YOU.

@briancnolan 2 жыл бұрын

So helpful. Exactly what I needed. Thanks!

@frugalmcdogal8779 3 жыл бұрын

Awesome, great job with the tutorial with my stupidity I would have jacked this tool all up! Thank you.

@many-points 3 жыл бұрын

Glad I could help!

@curbdog808 2 жыл бұрын

Yes!! Just what I needed! I couldn’t get the tip off (face palm emoji)

@many-points 2 жыл бұрын

Glad it helped!

@shaunwhetten3452 3 жыл бұрын

They should have you do the Jiffy Lube training videos!!!

@many-points 3 жыл бұрын

Haha!!

@americansoldier7776 2 жыл бұрын

Thank you for the video! You saved the day

@freecycling6687 3 жыл бұрын

Terrific, thanks!

@tmack7563 2 жыл бұрын

Excellent my friend. thanks so much

@americansoldier7776 2 жыл бұрын

I’d buy you lunch if you were here! 😂 Great video!

@RSW1484 3 ай бұрын

And that's how you make a how to video. Great job. It's been 3 years, how is the Lucas gun doing?

@many-points 3 ай бұрын

Stills working great

@355offroad7 2 жыл бұрын

Hey great video, super helpful. I was wondering what upper control arms you have on your Colorado or if those are stock? They look a lot different from my 2005 model stock control arms which I managed to put a crack in. Any info helps thanks!

@many-points 2 жыл бұрын

Good question, the upper control arm shown in this video is on a 2004 GMC Yukon, hence why it looks different. I have too many cars and too many friends/family's cars I work on so the different cars come and go in these videos. I'll admit that the Colorado is my favorite though.

@hammertime328 2 жыл бұрын

I just bought the same exact grease gun, followed step by step and can’t get the grease to come out. Any idea what I could be missing?

@many-points 2 жыл бұрын

Not sure without seeing it but perhaps the seal between the head (silver top part) and the body (red cylinder portion) isn't tight enough? There is always a chance you got a defective unit. I've heard of a couple of people getting bad ones so might be a problem with the gun itself which would be annoying but most places do free returns.

@archstanton9182 10 ай бұрын

How can you remove the used, empty cartridge? There's no way mine comes off.

@many-points 10 ай бұрын

If it get's stuck I use a pick until I can get an edge of the cardboard. Then if you can get a couple edges of cardboard away from the cylinder wall then crush the tube (pinch it) and pull out. Worst case it comes out in pieces but with enough persuasion it will give in.

@JF42506 2 жыл бұрын

I did exactly what you showed and I get no greese, the cylinder has no charge... any ideas?

@many-points 2 жыл бұрын

Hard to say without having it in front of me, however here are a couple ideas: If it is an old grease gun I would say take it apart and clean it and make sure there are not blockages. If it is new gun my guesses would be either a faulty grease cartridge, a bad seal on the cylinder itself (cap not tight or foreign material keeping the cap from sealing), or there is always the possibility of a faulty grease gun from the factory due to seals in the hand pump or similar issues. If you suspect the latter and I would get a replacement from where you got it or cash in on the warranty (should work well out of the box so if it isn't that is a real possibility).

@JoseManuel-so9rj 2 жыл бұрын

u can use the grease gun without a bottle of grease?

@many-points 2 жыл бұрын

Yes it can you can bulk load the grease and it will work without a cartridge. Though the cartridge is less messy.

@newcreation07 2 жыл бұрын

There seems to be a ball in outlet part that’s blocking the grease from coming out

@many-points 2 жыл бұрын

Hmmm I don't think there should be. Perhaps would be worthwile to complete unscrew the tip off and investigate if there a blockage.

@newcreation07 2 жыл бұрын

Yeah I’ll definitely look at it for sure.

@newcreation07 2 жыл бұрын

Yeah I work at landscaping and my boss got it so that I could keep parts of the equipment greased up so we’re gonna figure it out tomorrow so I’m sure we’ll fix it