Balancing Know-How: Understanding Unbalance

Рет қаралды 170,900

LUDECAINC

8 жыл бұрын

A quick explanation of machinery unbalance. More info: ludeca.com/categories/field-b...

Пікірлер: 54

@dcole808 3 ай бұрын

Great vid. I've been balancing for 20 years now, and this video should be in every training course. Great explanation of the unbalance parts.

@MaddDrEw 3 жыл бұрын

Thank you!! I just started a new job at a balancing company, and wow is there a lot to take in, especially when I only get like an hour and a half of training

@narasimhachopparapu4534 5 жыл бұрын

excellent video. you explained very clearly the physics behind root cause of vibration. Thanks.

@josephbaker677 5 жыл бұрын

I have been balancing industrial rotors from the tiny to 35,000 lb`s for 20 years. I use my old school CSI 2120 and I walk on water. Great video, wish I could explain this in a building at 150 db.. to them. I say weld this here and shut the door!

@thesuperjed1 6 ай бұрын

Wow this video is gold! Perfect easy to understand introduction to this complex problem.

@rohank2825 6 жыл бұрын

I was searching for this explaination... You deserve more views... Thanks

@HighBridge7 6 жыл бұрын

Thank you ! Great Job ! I understand !

@jitendraitankar9722 5 жыл бұрын

superb. thanks a lot.... absolutely loved it

@matthewws5694 3 жыл бұрын

Fantastic video. Could you please share the software you used in the demo?

@nadaibrahim796 4 жыл бұрын

Please I need the name of the reference that you are explaining from, thank you

@cliffordinggs9789 4 жыл бұрын

a well balanced video

@yogesh-sj4ys 4 жыл бұрын

Sir I want the procedure of carrying out testing of dynamic balance test on traction motor rotor.

@MuhammadEtaiba 4 жыл бұрын

I need a software to test my cad impeller before implemntation any one can help me

@jacobselle7982 Жыл бұрын

I’m literally going into a shadowing to take over this possibly at my job this is

@antonioramonfloresmoncada126 4 жыл бұрын

What ratio defines long or short rotor?

@joeyperez 6 жыл бұрын

nice animation... thumbs-up

@nareshchandru 4 жыл бұрын

Thanks ! This helped

@btsforever-ne8ll 4 жыл бұрын

Nice animation. Very useful. Thanks a lot

@LUDECAINC 3 жыл бұрын

Glad you liked it

@synio2492 Жыл бұрын

Great video. Thanks

@LUDECAINC Жыл бұрын

Glad you liked it!

@ariyarathneachala6234 9 ай бұрын

Thank you a lot

@pt.bumiperkasainternasiona4260 4 жыл бұрын

I need balancing machine on site can you help me

@sansakarii_bacchi 5 жыл бұрын

Hello Sir, General formula for Impeller, for final unbalance correction Plz post

@vytautasnar6338 6 жыл бұрын

what kind of types of balancing machines are used for turbocharger balancing?

@sivasrinivas3716 5 жыл бұрын

Rigid rotor hard balancing machine

@excelairqatar240 10 ай бұрын

Thanks

@nagakannanka 3 жыл бұрын

I think the correct axis referred here is not Geometric centre. It should be 'Rotating centre'. Because, even if both geometric centres and mass centers are coincided but the rotating centre is offset, then it creates unbalance. Also, even if mass centre is offset from geometric centre but if mass centre lies on rotation centre, then it is balanced. If i am wrong, please correct me. Thank you.

@andrewbryan8597 Жыл бұрын

I don't think you're wrong, but it becomes an issue of semantics. For the geometric center, it is implied that it should the the axis about which the mass rotates. Hence the geometric center is the same as the rotating center.

@nagakannanka Жыл бұрын

@@andrewbryan8597 Thanks for clarifying:-)

@r.sgamer7860 2 жыл бұрын

Good

@vivekgarg1584 4 жыл бұрын

which app or software are you using ?

@Sanjayroy96 3 жыл бұрын

What gmm in balancing terms

@OMARYassin1 3 жыл бұрын

Great Video.

@LUDECAINC 3 жыл бұрын

Glad you enjoyed it

@LUDECAINC 3 жыл бұрын

Thank you for watching!

@blowerbalancingwork5693 2 жыл бұрын

Good works

@LUDECAINC Жыл бұрын

Thank you so much 😀

@dipanjanmaity7710 3 жыл бұрын

Software name

@jameselliott9397 6 жыл бұрын

Ok that is all common sense knowledge to me. I guess my mind for whatever reason already knew that. The solution I am looking for is better ways to balance the unbalanced masses as I build a lot of machines.

@sillybuster 6 жыл бұрын

Simple you either put weight on or remove it. Doesn't get simpler than that.

@jameselliott9397 6 жыл бұрын

sillybuster I get that... but I am looking for more precise, easier and quicker ways.

@sillybuster 6 жыл бұрын

Dean Elliot I've balanced propellors weighing 2 tonnes to blower fan impellers running 15000rpm so can dynamically balance anything. There isn't a simpler way you just need the right set up and accurate instrumentation. Only takes me 30 minutes for high speed fan impellers obviously bigger jobs handling delicate assemblies with overhead cranes takes longer but I can't see any easier way apart from knowing what to do.

@sillybuster 3 жыл бұрын

@Muckin 4on 🙄 no can't play guitar... just can balance stuff.

@shimuanis7015 6 жыл бұрын

the software u used ??

@Higgzboson 6 жыл бұрын

shimu anis did u get that software

@shimuanis7015 6 жыл бұрын

no ..do u have ?plz send

@Higgzboson 6 жыл бұрын

shimu anis no man i searched.. I think its only available if we take there course..

@pio1254 5 жыл бұрын

there is no axial forces for unbalanced rotor

@josephbaker677 5 жыл бұрын

Yes under a cross effect dual plane, couple unbalance or "aka" Quasi-Static unbalance. Axial energy will be the highest. Only seen it once in 20 years