madera-fina.blo... Good morning friends, today I will make a video about the treatment of such seal or emporar edges or edges of the MDF as chipboard, this is done in different ways, in this video I'll give you some ideas to make this work because many times they ask me how to make this work, either in the channel or also either on the blog, the blog there is an entry on this method, but also decided to do it on video, so I can understand better.
As I discuss this work may vary either with nitrocellulose base, either with lacquer sealer, whether combining these two industrial-talc as talc gives body to these two materials, if we use the industrial talc for this job, we must keep in mind is that you must remove well the elements so that these can be mixed in an appropriate manner, with this we get a strong pasta to seal the sides of our MDF or also agglomerate as many Sometimes we want to paint these materials, especially the edges, in the video I show the entire procedure, as I will give you an example of how it turned out some samples I made earlier.
As always I sincerely hope that this video will be useful in their work, as I comment can be done in different ways, base, sealing, combined with an industrial talc, if we paint these two materials with water-based paints, we can use basis acrylic water, or even if we paint with water, we can use bases to the water, combined with a little talc as talc facilitate the emporado, but we should not abuse much talc, just enough because if is much talcum this can burst, only little is recommended to give body, good friends I hope this video will be useful, if you have any questions you can write that I gladly will answer them and try to help where I can
- Facebook: / luislovonn
- Google + : plus.google.co...
- Twitter : / luislovon1
- Blog 2 : aparendeconluis...