Sounds like some great memories! wish the arcades at the pizzerias made a comeback again! I guess that since it hardly takes no time at all to make them now, it might be pointless but hey, one can dream.

@@lukemorse1 yes yes, ughhh the good ol days

Thank you so much David! I really appreciate it a lot man. You too! keep on doing what you do and enjoying life as go🙌

I totally agree and I'll try to showcase the ones that get repaired when I can. Thanks a lot as usual!

What a story Tman! really impressive about the double run by the way! Glad to have saved this one and will try to put up a vid on it soon. It sure wont be a double loop though lol! Hope you are doing well!

What a neat little point! I never knew you could do that! the things you learn eh? It is a cool game though.

@@lukemorse1 kneel down and shoot one of the first lot of grave stones several times. It's one of the first 3. I think it's the 2nd or 3rd one. Keep hitting it and after 7-8 times and you get turned into a frog. Give it a go.

Thank you so much Ramon! Glad you enjoyed it :)

Thanks a million 😁! You and me both. I was getting a bit flustered with not finding the fault but good to have it running again!

Thanks a lot Scott! Give it a shot and see what you can find. It may be a bad connection issue as well. Check the ribbon cable connectors and check the soldering points on the bottom of them. They may be cracked. if so, use some flux and solder and add some fresh solder. Hope you can figure it out!

Thank you so much monstermug! I couldnt agree more! the human body can be a great tool in itself for checking these boards, as long as you dont use the wrong parts lol.

It lives again! Thanks man! That sounds like a pretty awesome memory for sure. The idea of a seaside arcade seems cool 😎👍 Thanks for the story and checking in as usual! Hope your gaming streams continue to go smoothly and do well!!

@@lukemorse1 This game was so amazing to me at that time. Thanks for the kind words, much appreciated. Have a great week 😀✌

I can totally relate to that. I was having such a "fun" time even with the schematics trying to find out what was up with it. Not fun at all. The missing sprites with yours might have been tied to those IC's on the back but I realize its a little too late now. Maybe this vid will come in handy for the future though? one can only hope.

Beats fire brand with one hand...legend is growing.

Kevin my man, you are a true gem! thanks as always brother for the positivity and good vibes, I really appreciate it! Glad you came along for the ride on this one and Ill see what else we can come across here in the future! Hope you also have an amazing weekend!!

Lol, you know I put them up when I can 😂

It's pretty crazy right. These boards throw all kinds of curveballs at you. Just glad to have found it.

You know it! Lol, sometimes works better than the test light lol. Btw, I think I need to order another Capcom adapter from you in the future. Too many boards and would be nice to have an extra one 😊

@@lukemorse1 Anytime Luke, just let me know what you need.

Hey there man, always good to hear from you. Glad to have another board going and looking forward to making a vid on some game play soon. Take care man and thanks again

Thanks a million my friend! RIGHT!! ? at the end there, that was so unfair lol. Made me second guess if repairing it was the right decision or not lol 😂 😁

HAHA!! the magic 5 hour touch. I touched this thing to death but at least it is up and running so Im glad. Thanks Jake!!

Haha! Sometimes NOT having the bugs on the board is a plus :) glad I was able to get this one back to fully working again though. Another one saved from the grave! Thanks Cahos

LMAO!! haha, totally not intentional (maybe a bit of luck there as well) but I appreciate it! Practice, practice, practice! thanks Stephen!

Thank you so much! To be honest, its a learning process for me as well as I go along. Figuring out what might be wrong and ruling out what isnt the problem. Still a long way to go.

Stuck in Golden Time permanently I think but glad I can share it with those who are interested. Thanks a million!

@@lukemorse1 No No My brother you cant thank me i should thank you :)i dont miss any of your( GOLD) vidoes ! Me and my few friends here (jordan-amman) we stuck like you in GOLDEN time 80s and 90s :( keep going you have all the support from us :) Wiw

Bonjor Retro gaming a papa!! Thank you as always! I'm sure if you tried something simple first, you would get better and eventually be able to do it yourself as well!! Thanks for dropping by again. Merci boku!!

Really, that's why they did that odd mask? We're they getting ripped that badly back then by knockoffs or just paranoid?

A bit excessive but honestly, if the schematics werent available for Ghosts n' Goblins, people still wouldnt know know to repair other Capcom pcb's like this as there are no schematics for them. Several people keep going back to the GnG manual to figure out games like Legendary Wings, Black Dragon, etc.

Thank you very much. I really appreciate it. Have a good day as well!

That was totally unfair! The game cheated so bad there 🤣

Thanks Ninja Master! I try with these things as much as possible but you are right about the TTL's for sure. I was really hoping I had it early on as well but what can you do eh? At least it is running again and I plan on taking out some of those other Fujitsu's here soon so I wont have to worry about them in the future.

Thanks a million Eddie!

Thank you Tony my man! always appreciate it ✌😁

Good question. There are a few reasons for this. 1st is that if the board had a problem with this IC before, there is a chance it could have the same problem in the future so it makes it easy to replace. 2nd, If the replaced IC isnt up to spec, is damaged, or is a fake IC (that happens from time to time), it would mean that the IC would have to be removed again. Sockets make the swap out process easier. 3rd as a rule of thumb, when replacing IC's it is always better to socket them because when you remove an IC you add heat to the board as well as the via's which weakens them each time you heat them up. In some cases, you can wind up ripping out a via, losing the pad to solder to, or rip a trace which you will have to patch and repair. Essentially, putting in a socket prevents further damage to the board in the future and allows for easier repair/trouble shooting in the future. So many reasons to add sockets, (obviously a whole board with sockets is quite rare) but usually these are some reasons why :)

@@lukemorse1 Wow great answer Luke! Thank you! I have in the junk pile a Centipede board that has no less than 30!! rusty, corroded chips that need replaced. I went ahead and found and ordered all that are bad. I thought it would be a good board for me to learn on. (board is bad but maybe salvageable) I'll end up spending way more on it than what its worth but what the hell?!? I thought of just soldering the chips right back on but your ideas make much more sense. Now I need to get some sockets as well... You vids have inspired me to try! Please keep them coming!

Great question man. The answer is yes and no. The piggyback method will work with many ICs but there are some ICs that have a clock circuit or may go bad if jumped with even a similar IC. For sound chips, ram, gates, etc, you can usually try that method. Even with maskroms you can piggyback an EPROM (as long as it is the same). With the sound sections of boards, the Yamaha ICs have a tendency to go bad often as well as the amp attached to heat sinks or bad capacitors, ram etc. First, Try the piggyback with the ram and YM amps and see if that changes. If you get sound, you are golden 😁

@@lukemorse1 Well sort of worked. Anytime touching the chip the static would disappear. Replaced both YM3014B chips. No more static on boot up. Fixed that. As for the SFX still sounds muffled which could be a bad ram chip. I more or less know where it is. Speech and music is fine. BTW this is a Robocop Version 1. Rom board is fine CPU board is what I'm working on. I've already replaced 2 bad ram chips tc5565 just to get it running. As usual thanx for the inspiration... What you do is an art form...

Thank you so much. Thanks for watching!

Good question. The IC's that I replaced in this video are all drop in replacements and no programming is done. When you start talking about a PROM or EPROM you will need to have a programmer handy for those. Not all programmers can program PROMS though and the replacements are sometimes not available. As a rule of thumb, just make sure not to damage those. You can check what it is by entering the part number into google.

@@lukemorse1 ok thanks very much , very helpful.