Great video thanks for covering the bits I missed! And well done for getting the dust port the right way up! Have you considered just cutting the aluminium rails off by 6-8 inches or so? That would give the best of both worlds, retaining extra capacity and being able to move around it 👍

Good luck with the new saw and figuring out how to fit it in your shed! Cheers Dave

Great run Down mate.. looks a really good table saw , cheers Rob

Definitely a good looking Saw. I honestly thought saws in the UK had to have a brake on the blade so I learned something new! Lumberjack definitely seem to offer some good stuff, I’ve barely bitten the bullet and bought Lumberjack stuff a couple of times now, the alleged poor customer service - when I looked online about them - really put me off. I’ve spoken to them on Instagram a few times though and they’ve seemed very nice. Knowing they’re doing better at after sales definitely inspires more confidence, cheers dude!

Looking forward to seeing you making some sawdust with it

Good video Dave really enjoyed it.

Hi Dave, Great honest review, with a lot of points covered that we can tell already will help a lot of future customers. Thank you and we look forward to seeing a potential video from you with the saw up and running for your workshop :) You know where we are if you need us. Kind Regards Lumberjack Tools

Easy and simple explanation 👌. Many thanks 😊 🙏 to you. I wanted to order one but unfortunately out of stock 😂

Great review. Have you thought about turning the saw around and having a narrower out feed on this side of the workshop

Looks like a very nice saw👍

👍👍👍 1st class review. Thank you Dave

Great review Dave, looks like a good solid saw and with good customer service 👍. As you said, you find out how good a company is at times like that and I've recently had a very good response from Triton Tools when I had problems with my thicknesser, so big 👍 to them too.

Great video dude, thank you!

this vid has a better editing than the previous, u doing good my man, keep your head up !!!

Had this saw for two years. Had some real issues with it. 13 A fuses regularly blew when the machine started up, and annoyingly, a washer came loose in the body of the saw and got caught up in the blade raising and lowering mechanism. It now makes a bit of a noise,but still works fine. Not sure how this will affect the longevity of the machine. Complaints said, I love this saw. The cast iron top is perfectly flat,the mitre slots are machined precisely and will accept after market accessories. The saw is powerful and will cut 2" oak down the grain,accurately and with ease. Changed the 13A plug to a 16A plug,no problem since doing so. Sockets generally run on a 32A supply. I wired the 16A plug directly into a socket,now works just as it should. Would I buy this machine again? Yes.

Looks very similar to my Rigid saw. The Bosch aluminium router table (RA1181), might bolt right on the end perfectly like mine.

I bought the same saw in the summer and been very happy with it. The ability to put a dado stack on it is a time saver,, however, a dado stack is very heavy and I found that an 8" stack of 9mm wide is probably the limit otherwise you will go through a lot of slow blow fuses.

Nice upgrade! Might need a shed extension soon ;)

Nice video m8. If i was to upgrade my table saw, this is the one i would buy.

Brilliant bud. I'm still on my DeWalt but I'll have one soon sort of drifted off into festool for a bit but I love table saws

Great vid dave, i have to be honest if i could afford to sale my axminster and buy this saw i would but im skint so cant. I think there are things which are better than my axminster ts216

Cracking video! I would be interserted to know if you can use the saw with the left side extension table and fence support removed - and the on/off switch located elsewhere? This would give improved space on the left - leaving the full capacity right of the blade. Is this possible?

Hi, I only just came across your post, as I too recently got one of these saws, although the Ozzie 'Sherwood' version. Did you figure out the out feed table and storage/space predicament? Just watching at the end, I had an idea that you could make a bench/out feed surface, which the table saw could fit under, as in pushed out the way when not in use. My suggestion could entail, as I will be doing with mine, to make a 'bench top' to place on my saw, with MDF to protect the entire surface of the saw, as well as use it as a flat 'light' work surface. If you then make a table frame with no top, you could have a removable 'lower' bench top (for out feed), and using said top protector, as I am, this could also be a 'light' use worktop. All you would have to do to push the saw out of the way, is pull out the lower out feed piece, and there you go.

Hi pal, glad to see you soldering on, best of luck to you. Just wondering as it’s a good few months on now, how are you getting on with the saw, performance and size wise? I’ve been on the fence because of the size. Thanks.

Hi I asked you before about the size of the box the table saw came in as I was getting a new workshop but due to some delays it hasn't been done yet. So I'm wondering if you would consider doing a follow up giving your opinion on the saw. Great channel, Happy Christmas.

I've got this saw and it was a massive step up from my old Titan 🙂 I'm glad you mentioned the blade spinning down so slowly, I was beginning to wonder if mine had a fault as it seemed to take an age, I can't even imagine how long it might take with a dado stack on it! Other than that, I'm very happy with it and LJ have obviously done something to deal with the electrical issue that @ragnbonebrown highlighted as I've not had a single problem What size would do you want for the infeed of the table saw? Could you spin it around and feed in from the back wall and build your workbench/outfeed table along side the mitre station, just not 100% of the width of the saw so there is a walkway between? If the workbench was on castors you could move it across to catch the wood when using the saw and back in to create more room when using it as a workbench? Hope that makes sense.

Thanks for the comprehensive rundown. One question: Would you be able to give the thickness of the riving knife? I'm interested in the compatibility with thin kerf saw blades.

Hi Dave great video on assembling the tablesaw. I'm waiting to but this tablesaw at the moment as it is out of stock and my new workshop is being done in a mo th or so it will be 6m x 3m with a pvc door and I'm wondering will the box fit through the standard size door? Do you happen to know the measurements of the box? I look forward to an update video when you decide to do one.

Nice video. I've watch a few now including Keith's. I really like the saw and for the price it's easily the go to choice. The one main stumbling block for me is the power issues he's faced. Are you running this on a 13A plug? Have you had any issues or have they been fixed at source? Cheers

Hi mate, what did you decide in the end regarding setup - im working out of a 10x8ft workshop and thinking of adding this instead of dewalt jobste and adding a router into the table etc but not sure on space :(

Thanks for the video. I’ve had the saw for a few weeks. It’s great, but I’m just having trouble with some slop in the fence. I contacted Lumberjack and they pointed me towards your video. I have followed all of the points in your video. The only thing I can see that i may have done slightly wrong is to have the front and back rails at slightly different heights. Out of interest, what’s the distance from your table top to the top of the rails?

Can I ask what the problems were with the Axminster unit that were so bad that it led to you buying a whole new table saw? I’m in the market for one and a trying to decide between Axminster or Lumberjack.

can i ask what issues you had with the axminster saw? cheers

Can I ask what the height is from the floor to the top of the table please?

Hi. Thanks for the video. I have this saw for two years more or less. Never been happy with it. Think i have a dud. Cuts out often, which is a pain in the b... My main issue and question to you, and anyone else is thus. My pulleys, the ones that take the belt to drive the blade, are if viewed from the open panel at the back, are not in alignment. This leads to only half the belt sitting on the pulley, and half just running free, which finally has caused the belt to break. Do your pulleys line up nicely and make use of the full width of the belt?

What exactly model is it mate?

Build another workshop. You need room for a table saw.

Hey there mate. hope all's well with u my friend. I watched RAG'N'BONE's review and build of this table saw and I was in contact with LumberJack about buying one. The price at the time was 899.00 euros which was good but they wanted another 300 euros to deliver it to IRELAND. I said no to that delivery price. It's way to high especially as AUK were willing to deliver their saws for free. I decided to wait and take a shot at building my own by buying the steel for the build and getting a good 3hp motor from VEVOR. I was wondering what ur thoughts are on it so far. Have used it mush yet or have u only recently put it together mate? The lad on Rag'n'Bone said he was well pleased with it but I think he had this issue with the SLOW BLOW FUSES. I asked them about them and instead of supplying it with the saw they told me I could get them in any electrical shop. Why don't they supply these fuses with their sw in case ppl have this issue. Imagine u buy this sw and it keeps tripping or bowing fuses in ur gaff. That would be very annoying for anybody who doesn't know what the score is with the fuses. Look I have to be honest here and say I'd never heard of Slow Blow Fuses befre watching that video from Keith? I hope I said his name right. He does have a good channel as well. Anyways I wish u the best with ur new saw mate.. The good thing with this saw is u can use the full rails and just turn it sideways into the wall and move it out again when u need to use it. Ur shop is small. Mine is approx 16x10ft.. I built some narrower storage shelving on the ground and even though it's a decent one car garage size it's not big enough for my wood collection to be on the ground at the other side with a bench, mitre station and drill PRESS. mY SHOP IS JAMMED FULL OF STUFF NOW. i'M THINKING OF BUILDING UP HIGHER BCOS i HAVE NO SHELVES up higher on the walls. That's the next plan for my shop now. I need a p[lace to put some lumber out of the way as well. Trying to manouver stuff in the shop can be mental gymnastics at times.. haha! Again take care my friend and keep up the great content..