Рет қаралды 292,487
This training is for the product known as LumiLor. There is a separate training video for LumiLor Pro.
Visit support.lumilor.com for additional training resources.
Chapter point times, module numbers and names.
00:00 M001 Introduction and LumiLor Theory.
00:55 M002 LumiLor Stack Diagram.
02:32 M003 Unboxing the LumiLor Starter Kit.
03:05 M004 Preparing the plexiglass panel and speed tank.
04:16 M005 BACKPLANE masking.
06:11 M006 BACKPLANE explanation. spray gun overview.
07:08 M007 BACKPLANE shake, strain, loading spray gun.
07:39 M008 Proper spray gun mounting between coats.
07:51 M009 BACKPLANE application on panel.
08:44 M010 BACKPLANE application on speed tank.
09:13 M011 Resistance check with multimeter.
09:37 M012 BACKPLANE unmasking and sanding tape edges.
10:14 M013 DIELECTRIC explanation.
10:49 M014 BACKPLANE masking the connection site.
11:23 M015 DIELECTRIC shake, strain, loading the spray gun.
11:59 M016 DIELECTRIC application on panel.
13:20 M017 DIELECTRIC application on speed tank.
13:47 M018 LUMICOLOR explanation.
14:12 M019 LUMICOLOR shake, strain, loading spray gun.
14:48 M020 LUMICOLOR application on panel and speed tank.
15:57 M021 BUSBAR explanation.
16:32 M022 BUSBAR masking the panel.
17:49 M023 BUSBAR masking the speed tank.
18:13 M024 BUSBAR application on panel and speed tank.
18:48 M025 Resistance check with multimeter.
19:51 M026 BUSBAR unmasking and wiring overview.
20:07 M027 BACKPLANE spade connectors preparation.
20:48 M028 Spade connectors and connection test.
22:00 M029 Spade connectors mounted with J-B KwikWeld.
22:40 M030 BACKPLANE application with panel connectors.
22:57 M031 Male connector application on speed tank.
23:32 M032 BACKPLANE application on speed tank connectors.
23:50 M033 Masking connection site and connect the inverter.
24:27 M034 CONDUCTIVE TOP COAT (CTC) explanation.
24:49 M035 CTC shake, strain, loading spray gun.
25:21 M036 CTC application to panel and speed tank.
26:18 M037 Encapsulating Clear Coat explanation.
26:43 M038 Encapsulating Clear Coat application.
27:23 M039 LumiLor encapsulation.
27:44 M040 Black out and Final Clear explanation.
27:57 M041 Black out preparation of panel and speed tank.
28:14 M042 J-B KwikWeld application.
28:56 M043 Masking of the illuminated area.
29:43 M044 BLACKOUT application and unmasking.
30:18 M045 Final Clear Coat application