🔗 WATCH THE FULL No Talk Review: bit.ly/3SenRME

There's an easy fix for that loud POP when activating the pedal. All you have to do is solder a couple of resistors to the internal board of the pedal. There are tutorials on KZfaq. I did it last week and it works perfectly. No more loud POP.

Yes the selector knob is dodgy. No question. But as long as the pedal keeps functioning for a year or 2, I'm more than happy with it. Extraordinary piece of kit

Wow... almost thought it was not worth the purchase! Thanks for the review!! 👍🏻

It is a good multi reverb pedal - but one thing to note is that this pedal absolutely needs a separate 9 volt adaptor. It cannot cope with any power supply interference if placed in a daisy chain set up. Worth knowing before you buy because you will need to buy a single 9 volt adapter, to avoid the disappointment of getting that high-pitched whine interference.

It's true, the selector knob is fragile. Mine misfunctioned within an hour. The thing is, I bought this just for the shimmer mode, which is exceptionally good. I mean, seriously good. I leave my MU on that setting and for that it was very good value indeed.

My prediction is that at some point M-Vave will fix the issues like bad power supply noise, footswitch click in the signal, bad selection knob, etc. and then this pedal will truly be the best cheap BigSky clone in existence.

I power it with a USB 5 volts Samsung phone charger and no whining sound at all.

How can this not have 100k views?

I bought a Sunydog version on Amazon UK for £22 vs £45 for the branded version. It was quite good on its own apart from a Univibe-like modulation on the tail. But it was brilliant when added after my ZOOM G3N and added real depth to the tone of an ambient patch. I bought a second one to see what it did and I liked the results. I even heard what sounded like a Chorale effect. I am a bedroom player and don’t have much experience or expertise, so YMMV.

I run a Boss NS-2 through my effects loop, along with my MXR -ZW44 Chorus pedal, my Digitech Hardwire DL-8 Delay/ looper, then run my Caline overdrive, Revv G4 Distortion pedal through the input on the front of my amp and it got rid of that overbearing buzzing sound.

I just got my M-wave today and it is way better than I expected. I have a Boss DD-500 delay and the learning curve is ,,ugh. If I can get a $30 M-Wave to do the job then Hell yeah. I'm not really having all of these described problems. As a home player I am just fine with his as I mainly just a home player. I record and write and that is the purpose si 30 bucks is fantastic for me.

I got the high-pitched whine from this pedal, running it with other pedals through a cheap (not-so-)"isolated" power supply. However I found a workaround: If I power it from the power-out socket of my Boss LS-2 pedal, the whine goes away. Another pedal that has a similarly useful power output is the Polytune3 tuner pedal. PS. I'm running the Boss and Polytune3 pedals through the not so good power supply.

To remove pop, u need to solder 250k or 1M ohm resistor on the bottom 3 pins of the switch. As for the noise, use isolated power supply.

47 suscriptores😮😮😮 Demasiado poco para el gran trabajo q haces !!! Tienes un nuevo suscriptor ‼️‼️

Parabéns, vídeo bem explicativo e com boa edição.

Maybe using a loop box to choose between Universe and another reverb could be a smart way to solve a pedalboard to be more versatile. Great video bro

It will be dope to hear the pedal FS click live!

thanks for the demo - the one i am waiting for a demo of is the Rowin LN-318 TOP Guitar Booster Pedal please do a demo of this you will be the first one to do it

Isso, sim é um review sincero!!! 😅

Very good, guy!! You're the single and true: Honest Guitar!

@chrisrochaguitar has un video de este pedal por favor, bendiciones

I know a good channel when i see one! Liked and subscribed.

It was kind of a pain to get when I was shopping for it...although, it wasn't long after Ryan's review on 60 Cycle Hum, so I should've expected as much. 😊 The thing I found out early on is that this thing LOVES to parallel process. Mine is on one of my Tri-Parallel channels with some mod after it, and instead of having it in a typical serial chain, this little sucker is right at home there. Plus, the phase-flip on the Tri-Parallel opens up some very strange and beautiful results when it's mixed back into the I/O bus. Gripes...selector knob, yep. Hideous foot switch, also yep. But what _I_ miss here is the old Cuvave non-aesthetic; it would've been awesome in battleship grey, with the boring font from their other boxes, because THAT is how "best kept secret" pedals SHOULD look! When people scope out a pedalboard, their eyes drift toward the glitzy stuff, and the Cuvave boxes don't register at all because they APPEAR boring...so no one can easily nick the sound just by copying your rig, because their stomp boxes don't attract visual attention. AURAL attention, however...😂 Yep, Ryan nailed it when he said that Cuvave does weird better than so many others in the pedal game. Good to see they're still at it, despite the visual "upgrades". Subbed also...reviewing this weird 'vave box early on gets MY stamp of approval!

Warto kupic.dziękuje za film

That funny music in the background is pretty groovy. Anyway, this is a tasty little pedal for 30, but it is mad sensitive on the power source.

i solved the issue no popping sound but the volum of the pedal come down i cant hear it anymore

The problem is the popping sound when you open it(on)

Good pedal...but I don't know how to handle the switch noise...😢 You suggest using a mosky looper...but if i want to run the mini universe through my amp's effects loop....how should i connet the mosky loop? Any suggestions welcome!

you call this a modulated reverb but i don't hear any modulation movement in it?

I have found the pedal only pops when connected to the effects loop of my amp

the mvave dig reverb and delay have the same problems.

I got mine today (May 27th 24) and it does not pop at all. The selector switch is bad though.

Does it leave trails when turning off? I heard it has a feature to turn on/off trails by pressing and holding the footswitch then plug in to power supply..have you tried this? Planning to buy this pedal.. 😅 TIA

Great Brazilian accent

Take a pic of the parameters on the bottom Ez

Comprei e não gostei... muito barulhento, só consegui silenciá-lo um pouco alimentando por USB, mas o estalo no switch permanece alto. Vou ter que partir para outro reverb. O que você recomenda para rockabilly e surf music? Desses mais em conta no Aliexpress, claro😂

Mine works great and if you could have only one pedal this is the one to get. Great reverbs! I bought 2 of them because they will take these off the market because they are to good? Like my ammoon octa pedal didi?

HIII, What reverb would you recommend in this price range that is simpler in the sense of not coloring the sound so much?

It is perfect for drone experimentación. Go china!

I love the sound of this pedal, but the engage pop is unforgivable and makes it impossible to use live without a workaround.

keep the para2 low ^^

Proper, expensive sounding shimmer... And good overall reverb sounds.... Just a little work on a revision that can cost.... Maybe 5 more dollars to avoid too many corners cut... And it would be really solid budget pedal... Undoubtedly copying someone else's circuit... but that's nothing new. Can definitely mute with many pedals.... Like a simple tuner pedal

Downsides. It has high pitched whine. It clicks. It stops your sound when turning on/off. Unusable. Even though it sounds nice.

😂 moded the pedal and it will find intall 400k resistor

Its $30........No BUTTS about it.

Impressive quality??? AHAHAHAHABAJAJAJANANAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHABAHA. That's not quality.