M2M GARAGE Episode 1 - HIGHLIFTER 850 2 INCH LIFT KIT!

Рет қаралды 36,748

5 жыл бұрын

Pumpkin and Gator install the HighLifter 2 Inch bracket lift for the Polaris Sportsman 850 HighLifter Edition!
Lift Kit - www.highlifter.com/high-lifte...
Tiger Tail - www.amazon.com/KFI-Products-T...
We will be at Muddy Bottoms next weekend April 12th - 13th for Redneck Revival!
Come out and say whatsup! We will be grilling out and enjoying some brewski and dipski.
Like - Comment - Subscribe
for more mud entertainment and install videos!

Пікірлер: 84

@MUD365op 4 жыл бұрын

Those rims look good! Sweet Bike

@Smodlee 4 жыл бұрын

Have u put on the stock wheels and tires to see if the rear tire clears the snorkel? It says a “1” inch spacer is required for clearance

@joenutsgarage 5 жыл бұрын

Keep up the content bro...you just got a subscriber

@madeiimuddofficial3967 5 жыл бұрын

Thanks Joe! Really trying to keep up with the filming

@willwestbrook8687 3 жыл бұрын

Was up buddy were did Yu get your handlebar mud strap?!?. I've looked everywhere I'm bout to put that same lift on my 2021 now.

@tshepp5928 4 жыл бұрын

Hey man are you running stock axels? Have they held up or have you had to upgraded them?

@chrismartin7662 2 жыл бұрын

Wish yall made more content!!

@minekaiju77 5 жыл бұрын

Looks good. How much more of an angle did it put on the driveshafts?

@madeiimuddofficial3967 5 жыл бұрын

904wheelin Really was minor change I didn’t really notice any changes in the axle angles, zero issues!

@2livedru 4 жыл бұрын

When it comes to your beer, don’t cheap out

@madeiimuddofficial3967 4 жыл бұрын

Dru absolutely. More bang for your buck

@jonathanwharton5837 2 жыл бұрын

Race driven never lasts more than one ride.

@chasebossett6949 4 жыл бұрын

When you cranked up the suspension was it hard to turn

@madeiimuddofficial3967 4 жыл бұрын

I don’t remember it being any more difficult than it was stock!

@nathanmayer6458 5 жыл бұрын

Did you guys cut out the a arms like it said in directions? I didn’t and it looks like there’s plenty of clearance but just wanted to see what you guys thought

@madeiimuddofficial3967 5 жыл бұрын

We honestly didn’t need too, I’m not sure what helped clear the axle but it was fine to run it without the rear a-arm cut out. Do you have the same bike?

@michaelyarwoodjr4001 4 жыл бұрын

only cut if ur running bigger axel meaning if the cups are bigger then oem

@OutdoorTonez Жыл бұрын

Nice

@StaceyAmour 5 жыл бұрын

I'm all about gaining two inches

@madeiimuddofficial3967 5 жыл бұрын

2" of terror!

@Waynerebelrider 4 жыл бұрын

I did the the same on my grizzly 👍📽

@madeiimuddofficial3967 4 жыл бұрын

Wayne c Menard rebel rider sick! It’s definitely handy in tough situations compared to before

@lilluda4735 5 жыл бұрын

Hey what was the name of that paint that you used for the brackets it looks really good how you did it I would want to get some for mine?

@madeiimuddofficial3967 5 жыл бұрын

lilluda4735 go to Tractor Supply Company and get you a can of Tractor Implement Paint! It works great!!

@lilluda4735 5 жыл бұрын

Thank you

@sportikakid_2390 4 жыл бұрын

Isn’t it bad to use those mud wheels on concrete cause it will wear out the tires very quickly ?

@madeiimuddofficial3967 4 жыл бұрын

Sportikakid_23 yeah they wear fast on street use. But we like to have fun sometimes 🤪

@TCMOutdoors 4 жыл бұрын

Have you had any trouble with exhaust heat on your tiger tail? I have basically the same setup but haven't installed my tiger tail yet because its so close.

@madeiimuddofficial3967 4 жыл бұрын

Trash-N-Treasure no not at all! I wouldn’t worry about it, it’s still functional to this day and doesn’t seem to have any heat damage

@madeiimuddofficial3967 4 жыл бұрын

Trash-N-Treasure what bike do you have?

@TCMOutdoors 4 жыл бұрын

2019 850 highlifter

@TCMOutdoors 4 жыл бұрын

I put it together but didn't leave it in yet because of how close it was to the exhaust. I literally just hot the bike like a week ago so its gonna be a little bit before I do aftermarket exhaust and all the and yours is the first I've seen with stock exhaust and the tiger tail on a high setting.

@madeiimuddofficial3967 4 жыл бұрын

Nice!! The 2019s are where it’s at!! And yeah I know an aftermarket pipe setup would help move it up and away more for sure. Let us know how it goes when you do man!

@GHOSTMAATVs 4 жыл бұрын

any axle binding when the suspension is fully drooped?

@madeiimuddofficial3967 4 жыл бұрын

This bike never had any issues with axle binding, we went through some hard tough areas and some deep holes never broke an axle!

@GHOSTMAATVs 4 жыл бұрын

@@madeiimuddofficial3967 good to know man! Gonna be installing my 2" bracket lift this week.

@madeiimuddofficial3967 4 жыл бұрын

Ghostma awesome!!! Let us know how it goes!

@chasebossett6949 4 жыл бұрын

Do you have any wheel spacers on it

@madeiimuddofficial3967 4 жыл бұрын

Chase Bossett nope! Just the offset on the wheels

@tennessippiriders2129 3 жыл бұрын

Did you need to add spacers so it would not hit snorkal

@beyond_ssj3886 2 жыл бұрын

I’m pretty sure u do

@MudmisfitzATV 5 жыл бұрын

Awsome vid guys

@madeiimuddofficial3967 5 жыл бұрын

#315MudMisfitz thank you!

@mathewsalas6348 3 жыл бұрын

How did y’all get the rear brackets in ?

@ronniearline8790 3 жыл бұрын

Right

@joshtreadway4264 4 жыл бұрын

Where did you get the wheels? Thinking about putting a set on my 850.

@madeiimuddofficial3967 4 жыл бұрын

Josh treadway bought them off a friend!! They were great before I sold it. New video coming soon

@joshtreadway4264 4 жыл бұрын

Made II Mudd Official I appreciate you getting back to me. do you know what size they were so I can try and find them? Need something that looks better than the stock highlifter wheels.

@madeiimuddofficial3967 4 жыл бұрын

Josh treadway 14x7 ITP tornado wheels 4+3 offset with 4/156 bolt pattern, wild boar Atv had best deal!

@catjackoff-road855 5 жыл бұрын

Nice machine. So the 850 doesn’t come with power steering a friend of mine who is older mid 50s is interested in buying one but figured it would be tiring on the arms with the 30s on. I told him I’m sure you wouldn’t notice it. Do you find it much different then power steering models?

@madeiimuddofficial3967 5 жыл бұрын

It's definitely not the most pleasant turning experience. The 850 has a terrible turning radius, so lots of back and forth turning left and right. But if you're rolling its not bad at all. The 570 we have has power steering and its a delight! so easy one handed driving all day long. Definitely love having it!

@catjackoff-road855 5 жыл бұрын

Made II Mudd Official yea my xmr 850 has power steering it’s nice but it needs a lot of area to turn

@madeiimuddofficial3967 5 жыл бұрын

Cat Jack power steering makes mud life easier haha 😂

@catjackoff-road855 5 жыл бұрын

Made II Mudd Official for sure I told my buddy he said he put an order in for an 850 highlifter and they are gonna see if they can get a power steering kit installed

@nathanmayer6458 5 жыл бұрын

@cat jack it’s not bad at all. I’ve got the 850 highlifter and as long as you’re moving you don’t even notice. Turn radius is a bitch tho

@joelpenner5571 5 жыл бұрын

How do u like the offset wheels? I have the exact same machine, same wheels and 2” lift. It’s like someone stole my machine lol

@madeiimuddofficial3967 5 жыл бұрын

Lol! That’s rare!! The offset is perfect I think. Stance looks better and more importantly it really improved the handling around corners while still fitting through every trail at the park

@joelpenner5571 5 жыл бұрын

Made II Mudd Official yeah that parts good. Just it doesn’t fit very well on the back of a truck very well anymore. Found that out the hard way lol

@madeiimuddofficial3967 5 жыл бұрын

That’s funny! Because it didn’t fit in Alex’s truck either! Had to build a ramp out of some 2x10s to get it over the wheel wells

@joelpenner5571 5 жыл бұрын

Made II Mudd Official smart. I just pushed in the wheel wells on my moms truck 🤷🏻‍♂️

@madeiimuddofficial3967 5 жыл бұрын

Joel Penner LOL!

@eldelabarranca 5 жыл бұрын

Where did you get those headlights?

@madeiimuddofficial3967 5 жыл бұрын

ivan Garcia we found them on eBay! But give me a day and I’ll tell you the brand when I get home

@klappncheeks4780 Жыл бұрын

How do you wheelie a 850 so easy? Lol

@MrNoe713 5 жыл бұрын

What brand of brake pads do you recomend?

@madeiimuddofficial3967 5 жыл бұрын

We use the SwampDog off-road brass brake pads!!

@MrNoe713 5 жыл бұрын

@@madeiimuddofficial3967 Thanks. This is the brand that you said they lasted for around 6-7 rides? The reason I'm asking cause I have the 850 HL and also the 1000 HL both atvs. I recomend the RJWC dual mud slip on sounds awesome.

@madeiimuddofficial3967 5 жыл бұрын

Alex1915 yep these pads last so much longer than the stock ones. I’m not sure exactly why but they do! And sweet! We are planning to get the RJWC exhaust soon!

@godark8332 2 жыл бұрын

“Highlifter 2 inch lift, it’s legit” lmao …drunkazz

@tonygasparro130 5 жыл бұрын

Whats the brand of the lift kit i cant find a 2" lift

@madeiimuddofficial3967 5 жыл бұрын

It is the 2" lift from HighLifter!

@tonygasparro130 5 жыл бұрын

@@madeiimuddofficial3967 i own a highlifter it comes with that from factory tho or is this an add on i found one but its for a sportsman 850

@mellii022 5 жыл бұрын

Tony Gasparro no it doesn’t

@madeiimuddofficial3967 5 жыл бұрын

Correct. This is a HighLifter 850 but doesn’t come with a lift from the factory. It’s an add on for the HighLifter 850.

@chasecampbell7325 4 жыл бұрын

How do you install the rear bracket?

@chasecampbell7325 4 жыл бұрын

And how do you crank the suspension 2 clicks?

@madeiimuddofficial3967 4 жыл бұрын

Just have to disconnect the struts at the top and reconnect them on the bracket after mounting the bracket! Also the struts have an adjustment on them with notches.

@chasecampbell7325 4 жыл бұрын

Made II Mudd Official Oh okay thanks man!

@chasecampbell7325 4 жыл бұрын

Is there a special tool I need to crank the suspension?

@madeiimuddofficial3967 4 жыл бұрын

Chase Campbell yessir, it should come with your bike if you have a high lifter. If not they are cheap on amazon