I bought a used machine so didn’t get a chance to learn from dealer. Going in cold turkey without any training!! This is so helpful.

Since it's been a while since I've used my machine, I came here to re-watch this video first. Thank you so much, Jenilee, for taking the time to put this information out there. You've converted me from the non-hooping method!

Thanks so much for the tutorial and sharing your knowledge. I just bought a sewing/embroidery machine and trying to learn as much as I can since this is all new to me. Great video.

OH MY GOSH!!! You are the only person to talk about HOW and TEMP on adhesive and stabilizer!! I often use adhesive paper for applique and repeatedly asked "Why is applique peeling off or sticking too much on applique but not fabric?" I know it was a heat issue, but either too hot or not hot enough or just plain old stuff? THANK YOU. Silk setting..I will try.

Thank you so much. This was the best help for puckering. I am a beginner and have had a terrible time with puckers. I can't wait to do my next t shirt. Most of what I have done is initials.

Your are the bomb!! Very articulate and to the point. I cant tell you how many other channels I have started to listen to and they lose me because of umm ahhh. Thank you very much!!

Excellent Tutorial - I liked the part about the nylon backing - great tips through out.

Thank you for sharing your expertise. I learned a lot.

This helped a great deal! Thank you for sharing.

I am new at this and these tutorials have proven to be invaluable. Thanks.

Thank you so much for this video; as I am new to machine embroidery, your video helped me enormously.

Ty..your experience is appreciated by us newbies

Thank you so much, great video!! just ordered my hoop master station and might hoop can't wait to use it!! your videos are soo helpful!

This tutorial is excellent. I just found it by accident, but I was happy to see it since I have the same elf design since last Christmas. Didn't use it because I couldn't figure out how to line up everything, so I stopped frustrating myself. Now that I know there is a video presentation on it, I will be happy to re-visit that project. I didn't take classes when I ordered my machine. Everything was new to me. I started taking classes on the Craftsy platform, and have taken about 10 so far. Thanks for your great tutorial

Great hint about marking the limits of the actual embroidery on your frame.

Awesome video! I want to say Thanks so much for the information about hooping tee shirts. I am unable to drive ( do to health issues) so I am unable go to classes outside my home without help. Having the on line videos for me to learn has truly been my life saver. Again thanks so very much for sharing such an great video!!

Great video, Thanks.

Good tutorial, but I wondered why you don't leave the template in the top portion of the hoop as you try to center it with the bottom hoop. That way you can see all the reference mark of the template, and the marks on your top hoop with the fold lines of your shirt. This makes it so much easier than lifting up the shirt repeatedly and moving the bottom hoop around, hooping, unhooping, reentering. Do you know what I mean? I hoop with the template in the top hoop, get everything centered referring to the template, remove the template from the top hoop, and attach to the machine.

Thanks so much for the wonderful tutorial on the tshirts,. an't wait to try a tshirt so I can get one to come out as good as yours. I am so glad that I accidentally came up on this site for the first time. Hope I can get to it again, or I will just go to your web site. Th anks again.

Great tutorial, very informative for us beginners. Thank you for taking your time to show us how.

Awesome !!! Very Very Helpful, Thank You and keep them coming !!!!

Thank you for the scotch tape trick,,,very helpful idea

thank you very much for this free lesson.val.

Excellent video. Thank you.

Awesome tutorial!

Good tutorial. Thank for teaching.

Best tips ever for puckering!!!

This is a Fantastic tutorial much appreciated, Thank you. And I Love your embroidery design. :)

Enjoyed your very helpful video.

I've been having issues with puckering. It's very irritating when you can't seem to get them out not matter what you try. I'm going to try your suggestions. I appreciate your in depth tutorial, very informative & easy to understand.

Thanks and great tips!😊

Thank you so much for this insightful tutorial!

Thanks!! Awesome information

Great tutorial thank you so much for the tips

I so needed this!

I have a Pfaff creative sensation and i can't wait to get back to the States one more year to go so i can actually go to a class where i can get some one on one classes on how to really utilize my machine. :)

I was working with Adult tee shirts yesterday 2X for the first time -used med. cut away - however, my design turned out a little crooked on each shirt.... I used the Brother snowman - what did I do wrong -? LOVED your video

Do you have a tutorial on how exactly I position my needle on thread breakage and missed stitches on my Bernina 73O?

Fabulous tips..thank you 💐

Hi Jennilee, your videos are great! I purchased some of your design, including the Naughty Elf Applique, at least two months ago, and downloaded them to my computer. I still haven't been able to save them to my jump drive and view them in my Brother PE 770. I feel so frustrated now, because I'm not computer saavy and this is much harder than I ever anticipated.

Helpful, a must keep....

Awesome!!

Excellent tute

HI there! do you have any recommendations as to where we can purchase good quality t-shirts like the one used in your video?

So I need a Light Weight, CutAway Poly Backing, for my PE770. I have been using a tear away medium weight by World Weidner and Sulky Spray, but keep getting puckers.

I have a viking husq designer se is there a class in atlanta Georgia that I can attend thank you need some help

Thank you so much

Sylvia, you should check at the Joann Fabrics close to your home and see if they offer classes on your Husq. viking designer se. Husq. viking store in the Joanns usually have an embroidery class.

Will poly mesh work well with sweatshirts too? Or would you recommend something different? Thanks for the helpful video!

Great tutorial! Thank you so much. Only problem I have is the sound. Probably just me. Wish I would have seen this last week when I was doing tshirts. ;)

This was awesome!!!! Please keep the videos coming; they are extremely helpful!!

Would inspira web mesh work just as well as the light?

Good idea shoving info inside tube

Do you have to use a separate program of applique? If so, what is it? I like large applique patterns to use on baby projects. Can you help?

Can you tell me where you got the stabilizer?

Hi, I am using a light weight cotton fabric and embroidering a heavy design. (John Deere Tractor.) I could not hear what stabilizer you were using. Could you tell me. I am getting puckers, but I am using 2 sheets of tear away stabilizer. Thanks for your help

Great video! I just ordered a Brother PE770 online and I have no idea how to do anything in an embroidery machine. Your video was very informative. Thanks!

Jennile, Thanks for making this video. I wanted to ask you if the stabilizer was good for high stictch count designs? If not what would you recommend. I am new to this and my thread breaks often, my knits get caught and bulges, and my fabric shows through the stitches. I want to get advice so that I can finally make a cute outfit for my little girl to wear with your awesome design!:( please help

Thank u

Would you recommend (or use) a topper on the front of the shirt to avoid the shirt coloring shadowing on light-colored (white) filled designs (or part of a design)? If so what would you recommend?

Dorothy, I don't know if you got your answer. I have a new PE770 also. Had the same problem. I went to Creative Designs and they suggested that I save ONE design at a time on a flash drive. Different designs from different websites look very different on my computer. I never know if I should click on "zipped" or "unzipped" to save a download. Any help is appreciated...

Sulky cut away stabilizer. What do you think? I Bought at Joann and I have a Viking Machine. I've also been told that the heat n bond will mess up your machine with gunk? I am new have no idea? Is the Heavy weight best for 100% cotton Onesies and small Tee's? Thank you

I have a problem with puckers as well. My fabric is cotton/poly blend. I used ordinary stabilizer ( neither fusible or tacky) The design looked really good until I carefully tore away the stabilizer. Then it started puckering. The design was a completely filled design. Should I have used a different stabilizer? After hooping, I stretched stabilizer and fabric till it was really tight before doing the design.

I'm new, please bare with me. After I hoop it the first time, I take it out and do it again. Why does that help it not to pucker? It's so darn hard to get it hooped straight, I can't imagine taking it out once it's in there! :o) thanks, Vicky

I usually hate t-shirts...maybe now I will be able to do it better!

thank You

Do you cut the stabilizer away after you iron? You said it doesn't stick once it's ironed.

أرجو ترجمت الفيديو بالعربية لو سمحتم

Excellent! Two questions do you have to prewash it before embroidering? Secondly what is the best ball point needle size to use?

OK

I tried over and over to hoop it like this removing it to prevent wrinkles I gave up it still had to be tugged to flatten it out, so wasted time doing this

The sound quality was so poor I could barely hear what was being said

😐😯😑☺

you talk to much, get to point. Nice video but could be 2/3rds less time.