3/4" IMPACT Wrench BATTLE - Milwaukee vs Makita vs Kress TESTED to the MAX

Рет қаралды 12,617

Күн бұрын

How well do other Impacts Wrenches compare to Milwaukee, Makita, Kress? is Milwaukee more powerful than Makita? Are Kress impact wrenches good? #milwaukeetools #impactwrench #battle #tooltest #vs #makita #kress #threequarterinch #impactdriver #machinerynation #powertools #projectfarm #torquetest #torque
Makita Link - www.makitauk.com/product/dtw1...
Kress Link - www.kress.com/en-gb/kress-20-...
Milwaukee Link - uk.milwaukeetool.eu/en-gb/one...
Check out our channel sponsors,
Oregon Products,
www.oregonproducts.com/en/
Aspen Fuel is a leading UK distributor of Aspen Products including Aspen Alkylate Petrol, Aspen Alkylate Fuel and Aspen Oil.
aspenfuel.co.uk/
If you enjoyed this video please hit the LIKE 👍 button, leave a comment and share the video with your friends!
Hi and welcome to the Machinery Nation KZfaq channel. We are here to make entertaining videos involving all types of machinery. On this channel you'll find comparison videos, product reviews, challenge videos, restoration projects, and much much more!
SUBSCRIBE to Machinery Nation to enjoy regular videos!
🎬 - / @machinerynation
*NEW MERCH!* Machinery Nation T-Shirts and More!
hayesmachinery.myspreadshop.c...
Join Machinery Nation for only 99p a month!
/ @machinerynation
If you'd like to visit our other KZfaq channel at MN Vlogs, find the link here,
📹 - / @finditfixitfarmit
Contact email,
contact@machinery-nation.com
Visit our shop for KZfaq Merch
hayesmachinery.myspreadshop.c...
Visit our sponsors Website
🌐 - www.hayesmachinery.co.uk/
Follow us on Social Media,
🎥 -Tiktok - / machinerynation
👍 - Facebook - / machinerynation
📷 - Instagram - / machinery_nation
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! We hold no responabiliy for the manufactuerers or thier products that we use. Thank you for supporting our channel so we can continue to provide you with free content each week!
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.

Пікірлер: 75

@1_2_Many_Projects 2 ай бұрын

Makita's 40v 3/4 gun is SO much better than that one

@rupertm2542 2 ай бұрын

I think the fact Milwaukee are churning out so many tool speaks volume on how much R&D they’re not doing. While I agree they’re powerful, I’ve seen a lot of people say they’re throw away items. Whereas Makita can be repaired by even a layman. I made the mistake of buying a Milwaukee chop saw a few years back, it was 2 degrees off true, which is a lot when you’re doing second fix timber work.

@AlexKall 4 ай бұрын

Yes, it's anti-vibration for the battery/board, to protect it from the impacting vibrations when used. Vibrations kills batteries/electronics.

@MachineryNation 4 ай бұрын

Good point cheers 👍🏼

@s.kxx1956 4 ай бұрын

These tool tests are certainly making an impact !

@MachineryNation 4 ай бұрын

Haha, love it!!

@marccadec6978 4 ай бұрын

The biggest issue with Milwaukee (apart from build quality) is you can't get spares/parts, where's with other makes you can every little bit. 20 years ago they were very good when they were owned by atlas copco/aeg.

@Premier_lawns_official 4 ай бұрын

Really enjoyed this video lads

@MachineryNation 4 ай бұрын

Thanks Robbie 👍🏼

@theoxfordshirehunter492 4 ай бұрын

Having the forge battery on the milwaukee was a smart move for sure, as you're upping the spec of the impact straight away 😅

@MachineryNation 4 ай бұрын

👌🏽

@kbbenkwith539 4 ай бұрын

When it comes to 3/4 offerings, the Makita 40v gun is much better than the 18v one…

@is5032 4 ай бұрын

Isn’t that Milwaukee superseded already with a new model?

@ashtreecare 4 ай бұрын

Excellent video again James it's got to be the most painful thing I have watched treating that Milwaukee like that 🤣👌

@MachineryNation 4 ай бұрын

I know, it hurt a lot 😂😂

@fortyone8203 4 ай бұрын

Why not use the XTG Makita 3/4?

@MachineryNation 4 ай бұрын

Very good point. We invite manufacturers to send us these tools and say what we are doing and they send us what they think is correct.

@Redneckkidd2007 Ай бұрын

Xgt is 40v and in a whole other world on torque

@therealdojj 4 ай бұрын

So where would you really use these for other than industrial places? Plus, the DeWalt one is supposed to be the best when other places have tested it, against the red one 👌

@99unclebob 5 күн бұрын

almost 5 years ago is when i purchased my 3 Makita impact wrenches, 3/8",1/2" and 3/4" the DTW 1001 thats how old it is and your other 2 ar recent within the last 24 months or less, I work in the heavy steel industry here in Canada and my co- workers have Dewalt, Milwaukee and Ridgid ,I have never had a warranty claim or needed service on any of my Makita impact wrenches or batteries or the chargers since i have owned them, the rest have had to do so, the Dewalt and Milwaukee guys have had to do the most , Milwaukee is bad for getting parts although the service is quick the parts are not, Dewalt is stupidly expensive to service, far more than any of the 4 purchased, my 1/2" impact wrench is almost as strong as the 3/4" one , One your right about ,Makita takes more years than any other cordless tool company to bring a new /revised tool to market, they don't need to, the existing works reliably and really doesn't breakdown like the other companies do and i have used Makita drills since the 80's when they had the 9.6 volt drills that were indestructible , too bad they quit making them, they were beasts 👍

@aibacninja201 3 ай бұрын

It is very clear that the experience is directed, and the smell of hidden advertising is clear

@MachineryNation 3 ай бұрын

No hidden advertising here. We were fair all the way through. Just passion for brands.

@zarajoe1 6 күн бұрын

How old is the review and your testing the LXT Makita. Where the XGT 40v Makita? Also Makita teal by the way not blue

@dougr3715 4 ай бұрын

Cool video!

@MachineryNation 4 ай бұрын

Thanks

@jimxyz8150 4 ай бұрын

Good vid....try the gen 3 milwaukee iam thinking buy 1😊

@MachineryNation 4 ай бұрын

Thank you, we try what we are sent from the manufacturers, so can’t be to choosy haha.

@88ElevenShop 4 күн бұрын

Milwaukee and Makita Very good ! Im From Viet Nam. Thank You !

@MachineryNation 4 күн бұрын

@@88ElevenShop awesome thank you. Please share our video in Vietnam 🤩

@brendanholden4340 2 ай бұрын

what about doing a test on battery powered first fix nail guns

@winfields13 4 ай бұрын

isn't the new milwaukee 1/2 inch more powerful than the old 3/4 inch tested here would like to see that tested against the winner

@MachineryNation 4 ай бұрын

Could well be, we will test this 👍🏼

@NBK3524 4 ай бұрын

Only issues with Milwaukee is they're throw away tools the cost to fix them is more or near the cost of a new tool where as the Makita Bosch ECT are fixable at a low cost

@michaellarkin8049 4 ай бұрын

Low cost fix because theyre shit. Why have a 3/4 drive gun if igg cant undo large nuts?

@djrtime1398 4 ай бұрын

My 1/2” Milwaukee impact started acting up and was out of warranty. The cost to fix no matter what was wrong was $199 US. A brand new tool with warranty is $249 US. Of course the extra $50 is an easy choice, but I can’t stand the thought of the old tool/boat anchor laying around that in reality would prolly run fine with minor repair. I hate Milwaukee for that.

@NBK3524 4 ай бұрын

@@michaellarkin8049 why wouldn't use you use a breaker bar at first anyways 🤔

@michaellarkin8049 4 ай бұрын

@@djrtime1398 they got a warranty of five years. How long do you expect it to last? As the video showed above you can get a diffenr tool that uuou can 'fix' but theres no point even owning the tool if you can use it for the job intended. Maybe wehave different expectations but if i can thrash something and work every day i dont expect something socheap to last more than 5 years.

@marccadec6978 4 ай бұрын

I have two Bosch impact guns,both at least 7 years old.

@almclean4835 4 ай бұрын

Funny guys, had me chuckling all the way through. What does kill these impacts is salt water, I’ve repaired two.

@MachineryNation 4 ай бұрын

Thanks Al. Good point!

@inga.hamsteren5552 4 ай бұрын

Happy easter guys😊❤

@MachineryNation 4 ай бұрын

And you Inga 🐣

@derrasenmaher9730 4 ай бұрын

Nice Video and great test even with soaking them into water 😁 please dont try this at home 😁 I would take the Milwaukee like it.

@MachineryNation 4 ай бұрын

Thanks mate 👍🏼

@derrasenmaher9730 4 ай бұрын

@@MachineryNation I dont know if you have any Bosch Professional tools in the UK but I almost have everything from them. Maybe you could test one of them next time 😁

@jossmith1990 4 ай бұрын

It would be good to see a Dewalt tool in the line up 👌🏻

@MachineryNation 4 ай бұрын

100%

@chucknorris2952 4 ай бұрын

3/4 Coming soon @MachineryNation

@brucehill9495 3 ай бұрын

And a habor freight

@DJC995 4 ай бұрын

Nice One Guys Thanks again

@MachineryNation 4 ай бұрын

Thank you Darran 🥳

@stephenkelly2067 4 ай бұрын

My 1/2 milwaukee takes off 4 wheels on one go no sweat on nh tractor wheels

@alexrowdy2718 Ай бұрын

Milwaukee rulezzzzzzzz !!!

@MrAirblade85 2 ай бұрын

Milwaukee hat zwar die brutale Power doch kann einfach nicht meit der langlebigkeit und Ergonomie eines Makitas mithalten.

@robdixon786 4 ай бұрын

Class loved that was the best review you could do still i do think the Makita was broken 😂😂

@AlexKall 4 ай бұрын

Would have to take it apart to see if anything broke from the impact because of the anti-vibration feature.

@billgates2903 4 ай бұрын

Looked floppier than my Makita tbh

@AlexKall 4 ай бұрын

@@billgates2903 I agree, would be interesting with a tare down to see if something broke and if it did, what it was that broke.

@MachineryNation 4 ай бұрын

We did compare against Josh’s own 1/2 and it was similar sloppiness 👍🏼

@AlexKall 4 ай бұрын

@@MachineryNation thanks for the answer!

@cryingeva 4 ай бұрын

Makita you should use 6ah battery

@MachineryNation 4 ай бұрын

1ah wouldn’t make enough difference 👍🏼

@roger4880 4 ай бұрын

Would never buy Kress, Chinese brand 💩

@loucifer4205 4 ай бұрын

So is Milwaukee

@bleyz3557 3 ай бұрын

Pretty much all of those sucks in terms of performance. MIlwaukee is still waiting for new 3/4 based on their newest 1/2 inch monster, Kress is like who cares, noname in other words, and Makita only cares about their xgt line. Inviting dewalt is pointless as they also wait for new 3/4 gun based on their overkill dcf961. If you want to get powerful gun it is better of waiting for new releases from milwaukee or dewalt or getting new milwaukee 1/2 inch wrench, dewalt dcf 961 on the other hand is killing itself type of a gun as 1/2 anvil inch is barely holding it together with that amount of torque.

@deanriley5690 3 ай бұрын

I've never seen more warranty returns in my trade than all others put together. They are absolute rubbish.

@deanriley5690 3 ай бұрын

Milwaukee is called milfuckyee