Can we all appreciate how much time goes into these videos along with making the vids for the Daggerwin channels 👍👍😉

Never clicked off another video so fast to see yours until today

Very, very well done! I applaud you for keeping this old gem from hitting the scrap pile! Thanks for sharing the journey..

You know in this world you have people who can , and people who cant. I am the latter but watching people like you is how even if we pick up one little thing from you then its all very worthwhile , and its how we learn. So thank you for sharing your informative video with us Sir 👍 Tam.

Together with a brilliant auto mechanic friend I produced a series of DVDs on classic car engine rebuilds, so I salute you for the amount of time and professionalism it took to shoot and edit this. Bravo. It was a pleasure to watch. Just one minor criticism: this is a British machine filmed in Britain - it's a silencer, not a muffler 🧐.

Just a shame these videos take so long to make, but it’s worth the wait.

A lot of us find dry ice to be a great help installing bearings and shafts. It shrinks the diameter a couple thousands, parts drop in.

Fantastic video. I feel you have completed the overhaul on that mower that we all would love to do. Great informative narration and it's great to see you taking so much pride in your work. Thanks for sharing.

From an engineering perspective I think those chain brushes are actually quite ingenious. Most American designers would find them crude but I say if something works then you go with it. It's nice to get a close look at this machinery. Thank you for the post.

This refurb was absolutely epic ! You went way above and beyond the necessary. Kudos my friend.

Great restore. You really do a great job saving and rebuilding these items. Really enjoyed watching.

I have never heard of it or even seen one like here in seven mile Ohio USA But I love how the mower deck throws out the front and rear. Job well done my friend!! Really great video quality too.

Pure mechanical bliss dagger! Thanks bud! Hope you’re staying safe during these tough times sir! 🍻🍀

So happy to see another video uploaded. I never watch really long ones. 20 minutes is about my limit. But when I saw it was yours I knew right away I would watch every second. I’ll be supporting your patron after the holidays most definitely

Thorough job, well done. I've had a Countax K14 twin since new in 1993. Every year it needs attention and something renewed, but I wouldn't have anything else. New ones don't seem anywhere near built so well.

No countax here in Canada. Thanks for the video, always watch but never really comment. Cheers.

Awesome restoration, good complete front to rear service, nice tidy work and very enjoyable to watch.

Your attention to the details, even those you cannot see is amazing. Glad I subscribed!

Huge amount of time and effort but the mower looks great. Man, that powder-coat! I wish I had a set-up for that. Such a beautiful finish after baking.

Awesome work. Your videos help me get through my night shift. Every night I log in and hope there is a new video on your channel. Keep up the good work.

Great job as always buddy. My next project is definitely gonna be a mower thanks to you!

This is a channel that i really appreciate! I'm a restorer aswell but i work with Chainsaws! 😄 Keep making great content my friend!

Great work, looks much better since your restoration. Looks like it'll last another 30 years.

I don’t believe for a second that you live in England. The sun is the giveaway.

Great job.. really enjoyed your video. Nice to see how well you finished this restoration.

Thank you for the all videos l like your restoring videos , survival challenge, and survival role-play. You put a lot of time in them and I much Appreciate them thanks again

I'd say the results speak for themselves - WELL worth the effort, and a very nice job!

What a wonderful video. I enjoyed every miniute of it. You can be very proud going round the garden using it.

Love the sound of the birds in the background. Great job, BTW.

The webbing structure on the gear box @ <a href="#" class="seekto" data-time="2785">46:25</a> is a work of engineering art. Btw Great videos and good you care about the environment...perhaps when temporarily sealing things, use an elastic band rather than plastic ties?

That was both very nicely done and a joy to watch this refurbishing project. The only problem I see is you now have to build a bigger powder coating oven so you can bake an entire lawn mower chassis. I love to powder coat but so many times my typical kitchen converted oven won't allow me to powder coat large items. Thumbs Up for sure...

realy good showing of that renovation Daggerwin you are the best

i like your videos they are straight to the point no dilly dallying like some fix it videos on here i'm about to do a couple of ride on mowers myself so these havee inspired me . then i might source a couple more to fix up as well cheers ..

Wow at that brush hog deck none of our smaller lawn mowers have that option here in the USA and Great work on restoring it!

Nice video, liked the way you just kept on going with the restoration. Keep up the good work. From Washington state.

Another excellent video. I learn something in every one I’ve watch.

Top notch video! Watched from beginning to end! Great to see someone do good work!

Excellent job very professional and competent restoration and entertaining video - well done and yes worth the effort.

Love your channel mate...your detail to these machines makes them much better than new!

That’s a good engine! Had one on a old walk behind 48 inch deck belt drive sips fuel! Was excellent on fuel

Awesome how it looks, and the amount of work you put in to them. I would love to do that to some of them, but health won’t let me. Keep up the good work.

Well done, love the b-roll footage of the geese. Yeah I don't know that I've ever seen a Countax here in the US, but if it runs on a Honda engine, we probably have it under a different name. Great video, love watching renovations.. Jimmy

Fantastic video as always your videos are extremely helpful thanks doing these

Great job must be very satisfying to get these machines running considering the shape that you get them in, this ride one looks like a very good one and I suppose that it would have been expensive new. Love watching you channel and always look forward to the next instalment kind regards John Tasmania Australia 🇦🇺

Excellent work! Just wondering why your vids haven't been recommended to me before in the last 5yrs. i have been watching this sort of stuff, nice to see a fellow Brit doing this for a change, liked the occasional nature shot, squadrons of Geese, needless to say, i have of course, SUBSCRIBED!

My 38" 16hp Countax must be over 25 years old and still going strong, being used every week.The powered collector is, in my opinion, a much better option for the UK over the mulching deck, as we get massive grass growth and tons of leaves and debris all over our lawns due the the amount of trees we have. I always coat exposed aluminum in motor oil to stop it corroding, I know it attracts muck but after a few uses it isn't noticeable and it really protects the aluminium. I am still on the original belts apart from the serpentine deck belt and the powered collector !! (just wait for the comments on that one) Nice Video, brilliant production - you must have the patience of a saint!

One of these days we’ll catch a glimpse of him from the shoulders up and discover that he’s really Zaphod Beeblebrox.

these are nice mowers so very useful to see work done on them,, it did not warrant a full resto but there was enough done to make it serviceable with confidence for a good many years nice one,,,,

awesome renovation detail is great love to watch video thanks for showing it 150 percent awesome

I'm from Kentucky, USA an I probably see 2-6 different riding mowers every week and I've never seen a mower quite like this one. It's a cool mower, almost looks like a older Kubota or snapper

PA LAWN GUY> Great video. Painting the cutting blades improves the aerodynamics of the blade and hence the grass flow. It also reduces the power needed to turn them. At least until they build up with adhered grass. that is why it is best to clean and paint the blades when they are sharpened and balanced. the best to you in your work.

Just subbed, and rang the bell, I must say, wow, was awesome to watch the amount of work you do, very well done..... Greetings from across the pond.

ps. Just so you know, I am from the UK as well. It is nice to see someone from my neck of the planet!

I have a C600H purchased new 2008 with 16 hp Honda V twin OHC has 305 Hrs still looks good and stored in side has 38" mulch deck and was converted to hand control with a mobility scooter seat (high back & arm rests 90° seat rotation with locking mech. seat belt and chest strap) I'm a C7 Tetraplegic and my Countax has never let me down still has original battery. I live in West Otago South Island New Zealand Have a Merry Xmas & a Happy New Year

Very nicely done, sir. You inspire me to freshen up my Swisher Big Mow. To answer your question we do not have that brand here in the US. Not that I've seen anyway.

Nice to see another Hitachi fan. The multivolt tools are unreal.

I also welded those top and bottom slots between the front axle and the king pin sleeves, after one started splitting down the weld.

Loved the restoration!! Keep them coming!!

I Did A Restoration Of My Countax C800H. Including Deleting The Electric Deck Lift Which Went Wrong 3 Times. And Decided To Convert It To A Manuel Deck Lift. As It Was Very Expensive The Dial-Height Module Etc. But Ive Owned 4 Countax Mowers And Think There Fab Love Your Videos.!!

Been waiting on a new one from you. Great job on this one.

Looks good as new, great job, thanks for sharing.

Nice looking machine, great job, love the occasional nature shots, haven't heard of this machine here in Australia, but that doesn't mean they're not here, i have a Craftsman with the 500cc Briggs. Thanks, nice video.

Fantastic video dude, it looked as good as new when you had finished

Great video and I look forward to the next one. I never miss one you do an amazing job on every machine!

That's a nice little mower. I wouldn't mind having it myself.

I live in a village in North Yorkshire UK we have this exact mower for the village green... there’s lots of them over here a proper work horse, nice job by the way

Love these long vids ,I totally appreciate it takes a long time to make though,if you can hang in there Daggerwin you will be right up there with Mustie1👍👍

Outstanding work! Make it your Sunday go to meeting Lawn tractor.

I really love these mowers that spit out the mulch from the back. I never see this feature on Canadian mowers.

Well done, have to say my ocd would make me go even further but this was really good. Seen so many people just half ass the job. Had a Husquarna top of the range with 122 cm mower deck and atwin 22 hp Kawa engine and hydro +hydraulik lift of front deck and sevo of course. still running strong after 20 years though I sold it when I moved into a flat. I look like inspector dreyfuss in a pink panther movie when I see it and it is not cared for as I did. Believe it is the same gearbox/axle, the tough torq they both used back then.

Великолепная работа! Не смотря на формат ( <a href="#" class="seekto" data-time="82">1:22</a>:56 ) видео смотрится на одном дыхании. Спасибо за профессиональную работу.

Just seeing this video for the 1st time. Every time i sharpen my mower blades i use the wire wheel on a bench grinder before i sharpen them

That was nice of the equipment company to give you the press for your shop that is a nice looking ride on feild and brush mower glad it has a Honda engine on it the mower you work on in today's video is arien mower company in here in the USA

Hi! Very good job indeed! We have a Countax C600 (I think...) in Italy, it's exactly the same, just with different engine, the 16cv twin cyl Honda! Thank you but thank you very much... now I have a complete video service manual for it! By the way this is one of the best mower I've ever seen: we have it from 2002 (has been produced in 2001...) and it's now in better condition than yours! We clean it everytime and take it in a closed garage but it works a lot every year... from 18 years!

nice video . i have a c300 and always good to use these videos to see how to fix things and change things if you don't have a manual . your cutting deck leveler is different though and looks a newer machine than mine 1997

Nice work daggerwin keep it up, came from the other channel. Both like them.

Fantastic work time and effort shows great results and ofcourse a bit of know how 😁

You were lucky to see those geese <a href="#" class="seekto" data-time="3240">54:00</a> what a load of them and an amazing V formation

I bet it's an amazing little rider great job as always great video to great start to the morning

Brilliant job mate, well done👍

Excellent job I really appreciate everything you did

I can't believe the amount of work you did on that tractor. Amazing job. I've never heard of that brand before in Canada. Looks built very tough for its size. Might not be the most easily serviceable but that is secondary to having something that can last. 👍

"If you don't secure that bracket down the clutch will spin around and rip the wires out" PTSD about an incident with my John Deere and those wires hits...

Otro gran trabajo realizado con excelentes resultados en este tractor corta cesped britanico, mis respetos y saludos desde Venezuela.

Keep them coming, great job!

I enjoy all your video keep up the good work

I´ts such a relief to see that someone is actually taking proper care of the mower deck, and not only the rest like a lot of "cheap" Americans do. This is a MOWER, not an engine with a seat and four wheels to ride around your fat gut. Well done!

Great job it looks fabulous

Incredible. I wish I had your skills and talent.

Wonderful work!

*Well done.* Very enjoyable to watch.

We are Ariens, Westwood and Countax dealers based in Pembrokeshire, South West Wales. I have repaired and serviced loads of these machines.

Great job mate it would be awesome to see you on micks mowers Live stream on the 19th there's a awesome line up of small engine channels gonna be there but I know your very busy running both of you channels keep the awesome content coming im in the middle of building my shed /workshop to carry on fixing mowers etc 😀

Your very welcome , guess I’ll keep my comments to my self , you do Avery good video and I learned some things. Thanks.

You want the underside of the mower deck as glass smooth as possible to make as few areas for the grass cuttings to build up.

Very well done again. Top job

Nice job on the riding mower it running like new

A detailed job very nice 👍

Being in the US i have never seen a mower deck with chains, i guess you have a better concern for safety than we do.

Another great video, nice job on the renovation!