Machining the Titan's of CNC 3M : Double Trouble or How Servo Settings Matter
Рет қаралды 1,996
5 жыл бұрынHaving successfully completed the Titan's of CNC Academy 1M and 2M; today we cover the 3M. Cutting soft jaws and then the part we work on improving surface finish by adjusting some servo settings and cutting the part again.
@jasonruch3529 3 жыл бұрын
Your gonna have to learn it regardless
@michaelgiraud3163 5 жыл бұрын
Great video and presentation. Keep them coming.
@MakingandBreaking 5 жыл бұрын
Glad to see this video series continue! After the posts on the skyfire community, seeing the difference on video is nice.
@HandsonCNC 5 жыл бұрын
Yah, those server setting changes were shocking.. Because the faceting was so predictable I would have bet a soda that the issue was in the controller.. But apparently the servo was being too "gentle" with the commands in a very predictable way so firming up some of its holding torque and changing some of the timing did it... #themoreyouknow...
TITANS of CNC MACHINING
Рет қаралды 225 М.
D1NAZ02
Рет қаралды 3 МЛН
Nikita Zdradovskiy
Рет қаралды 6 МЛН
Haas Automation, Inc.
Рет қаралды 386 М.
TITANS of CNC MACHINING
Рет қаралды 95 М.
TITANS of CNC MACHINING
Рет қаралды 1,5 МЛН
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 47 МЛН
Ăn Vặt Tuổi Thơ
Рет қаралды 34 МЛН