Made A Speeder Bike From Junk

No video

Made A Speeder Bike From Junk

Рет қаралды 7,114

Күн бұрын

I had leftover junk bits from an AT-AP Star Wars walker that I used in my last build and one of the junk bits looked like a Star Wars speeder bike to me. When you get a toy at the thrift store for $2.99 and get two custom toy builds out of it, that's a good day. This little toy mashup/scratch build came together pretty easy and in the end I think I have a pretty cool little speeder bike.
I hope you enjoy this toy customization kitbash video!
Thanks for visiting DR Toys, and as always...
"It's a great day to be a toy nerd!"
#toycollector #toys #actionfigure #starwar #galaxysedge #thrifting #thriftstorefinds #disney #disneyland #gundam #finalfaction #1MRobots #drtoys

Пікірлер: 140

@robertlocock5636 Жыл бұрын

Tip for filling screw holes, you can pour in some baking soda then drip on some CA adhesive, let it cure then sand back ( you can level the powder off first to make the sanding easier ) Larger holes can be packed first with cotton wool then topped off with BP. Also the front fins are from the triple pack droid starfighter toy , the one with 3 fighters and a handheld stand that "ejected" fighters to simulate hits in combat.

@DRToysCreations Жыл бұрын

Great tip! I have used the two before but never thought of it for filling a hole! Thanks so much!

@jerrybailey5797 Жыл бұрын

Fantastic scratch built Speeder Bike DR Toys , looks great 👍

@DRToysCreations Жыл бұрын

Thanks again!

@MA-CINEMA Жыл бұрын

Wow! A speeder bike that looks better than Star Wars with junk materials. Damaged paint and delicate modeling are wonderful like the real thing.👍 I love this speeder bike.😃

@DRToysCreations Жыл бұрын

Thank you very much!

@thatdonutboy4321 Жыл бұрын

Excellent multi-repurposing of that original toy...that was a mouthful! Again, a great watch Dave, thanks so much~

@DRToysCreations Жыл бұрын

Very welcome

@encouragingthings Жыл бұрын

Absolutely fantastic build! It's always nice when parts left over from your last build roll right into your next one. If only to save a little space in the parts bin! Great work!

@DRToysCreations Жыл бұрын

Right! This one kinda made itself!😂

@twistedxcustomtoys2665 Жыл бұрын

Beautiful build that's what I call a whoop Speeder bike I love it good job😊😊

@DRToysCreations Жыл бұрын

Thanks! 👍

@ConjuredCraft Жыл бұрын

The weathering is just * chefs kiss *

@DRToysCreations Жыл бұрын

😃 thanks!

@charlymacias5369 Жыл бұрын

I totally expected you to make a landspeeder out of the cockpit, you caught me off guard! 🤣 It's a great bike, it would fit 110% in any Star Wars media!

@DRToysCreations Жыл бұрын

Gotta keep everyone in their toes!😅 Thanks

@scaleffect Жыл бұрын

Incredible execution Dave, looks perfectly in-universe for Star Wars.

@DRToysCreations Жыл бұрын

Thanks

@PearlJam2k6 Жыл бұрын

Funny, i looked at the gun barrel/body and thought "Pod racer" :D Love how different builder minds work.

@DRToysCreations Жыл бұрын

Yes! A pod racer would have been fun as well! I haven’t ever done a pod racer. I need to put that in my project book.😃 Thanks

@PearlJam2k6 Жыл бұрын

@@DRToysCreations Do it! Im sure you know of Boyley hobby time, he uses very often filament LEDs and that could be great for a Pod Racer build! Looking forward to seeing what magical scrap you manage to use up for it

@TheKingofFigures Жыл бұрын

perfect! I love how you have ideas and create a super figure from the rest of the toys you have. Anyone who looks at the piece without watching the video never says that this piece was made from the remains of other figures. Congratulations friend!!

@DRToysCreations Жыл бұрын

Thank you so much 😀

@justinhuber5371 29 күн бұрын

LOOOOOOOOVE it!

@DRToysCreations 28 күн бұрын

Thanks!

@yourbluewaffle Жыл бұрын

Great color choice and weathering work. Looks like it belongs in an episode of the Mandalorian.

@DRToysCreations Жыл бұрын

Thank you! Cheers!

@mr.kilpithiri4098 Жыл бұрын

Weathering makes it to look so realistic🤩, and yeah speeder are always cool to make 👍🏻🤩

@DRToysCreations Жыл бұрын

Thank you so much 😀

@antoninagrachre6898 Жыл бұрын

Cool 😎 love it awesome 👍😎❤🎉

@DRToysCreations Жыл бұрын

Thanks 😁

@jazzmusician46 Жыл бұрын

That is so good! I am always looking forward to your videos. Besides the beautiful builds you do, your infectious smile and personality makes this channel very special. I am on a few channels, and most presenters never speak, and simply point to things that need to be done - especially these restorers of antiques. I’m sure you’ve seen some. I find them boring and I eventually unsubscribe. Thanks once again for sharing your terrific work with us. Your friend from Australia, Graeme.

@DRToysCreations Жыл бұрын

I'm so glad! I honestly strive every video do be an encouragement to others so your comment means a lot to me. Thank you!

@brianperkins469 Жыл бұрын

Absolute perfect timing on this project. I had just found the exact same toy at my local thrift store less than a week before. I too saw speeder bike and a host of other gems. You definitely give me inspiration and a higher bar to aim for. Keep up the great work!

@DRToysCreations Жыл бұрын

Very cool! I’m sure you’ll make something amazing!😃

@MrFederation Жыл бұрын

Hey Dave, I enjoy watching your videos. You should do a video where you attempt to model something based exactly on its description!

@DRToysCreations Жыл бұрын

Love that idea… I have so many projects rattling around in my noodle you never know what’s gonna happen!

@johnkelley9877 Жыл бұрын

The model looks great Dave! This is so neat looking and the colors are a good choice. Thanks for sharing this.

@DRToysCreations Жыл бұрын

Glad you like it, thanks for watching!

@BrynSmith76 Жыл бұрын

You knocked it out of the park with this one. It looks awesome. The droid fighter wing as the front fin worked so well.

@DRToysCreations Жыл бұрын

Thanks a bunch!

@BDZman1069 Жыл бұрын

Awesome!!!

@DRToysCreations Жыл бұрын

Thanks!!

@petebutler5139 Жыл бұрын

That “perm-a-smile” draws me in every time! Love the channel brother! Keep up the good work!!

@DRToysCreations Жыл бұрын

Thanks! Will do!😃

@THROTTLEPOWER Жыл бұрын

Oh wow, very cool!!!!!!!!!

@DRToysCreations Жыл бұрын

Thanks!

@z0m813 Жыл бұрын

I feel like every video every project is getting better and better

@DRToysCreations Жыл бұрын

Thanks! Sometimes I wonder…😂

@Gnomesayin Жыл бұрын

Looks awesome! Reminds me of a specific Power of the Force II series speeder bike - especially with the green paint! Great work.

@DRToysCreations Жыл бұрын

Thank you very much!

@cerisekappes580 Жыл бұрын

Love the results 😊❤😊

@DRToysCreations Жыл бұрын

Thank you! 😊

@cerisekappes580 Жыл бұрын

@@DRToysCreations you are welcome

@fredfournier693 11 ай бұрын

i love that !!!! bravo!!

@DRToysCreations 11 ай бұрын

Thanks

@marsgarage8217 Жыл бұрын

Nice work Dave..👍

@DRToysCreations Жыл бұрын

Thanks 🙏

@cherylwhite-butler6237 Жыл бұрын

I sure do love your imagination and what you do!

@DRToysCreations Жыл бұрын

Thank you!

@MichaelHeffner-ky6pc Жыл бұрын

this i like one of your best builds in a while....cheers Bro!!!!

@DRToysCreations Жыл бұрын

Thanks 🙏

@garzilla7123 Жыл бұрын

That was pretty slick my friend very cool and awesome. When you put the first exhaust I thinking that would have been a great spot for a stand and apparently we were thinking the same thing because in the next scene you did it, pretty scary that we are having the same thoughts 😮 , but it was a good idea. That is so cool that you can get multiple projects out of one old toy. 👍

@DRToysCreations Жыл бұрын

😂 I’m not sure if I should be worried for you or you should be worried for me… 🧠 😂😂😂

@garzilla7123 Жыл бұрын

@@DRToysCreations It's a scary thought isn't it. LOL 😂😂😂

@petebutler5139 Жыл бұрын

The way the figure sits on the bike, reminds me of MOTU. Super7 has 3.75 MOTU figures that would look great with it. You’d need to add some primary colors tho to make it He-Man worthy 😂

@DRToysCreations Жыл бұрын

Love it!!!

@triplet7788 Жыл бұрын

This bike is magnificent. General Grievous would make an acception and add this to their collection.

@DRToysCreations Жыл бұрын

😂 Love it!

@adamroban7934 Жыл бұрын

Very cool! For those front fin pieces I recognized that piece from a toy I had as a kid, like a core memory unlocked, I feel like it was a Star Wars toy from the Clone Wars. Regardless it was very cool to see you use that part in a very creative way. Love the content keep up the good work!

@andrewshepherd1537 Жыл бұрын

I think thise were the wing foils of a Vulture Droid

@DRToysCreations Жыл бұрын

Thanks!

@BrushQuill Жыл бұрын

Thats a great build bud. Looking forward to seeing the pilot come up somepoint too. :)

@DRToysCreations Жыл бұрын

Aww yeah!!!

@starkiddo83 Жыл бұрын

Great build. 😃

@DRToysCreations Жыл бұрын

Thank you! 😁

@jamiedowsett7744 Жыл бұрын

Super cool build ❤

@shawnj547 Жыл бұрын

Awesome job 👍👍👍👍

@DRToysCreations Жыл бұрын

Thanks 👍

@TrevorTimmis Жыл бұрын

Awesome as always ⚡️

@DRToysCreations Жыл бұрын

Thanks again!

@garybuettner7920 Жыл бұрын

Great video.

@DRToysCreations Жыл бұрын

Thanks!

@MarcoRuschkowski Жыл бұрын

From all the great builds you have posted so far, this feels the most "shelf ready". Like It would like right at home in a mainstream toy line.

@DRToysCreations Жыл бұрын

Glad you enjoy it! Thanks!

@rubenawer Жыл бұрын

Gran trabajo!!

@DRToysCreations Жыл бұрын

Thanks!

@darrenmichellesummers1019 Жыл бұрын

Looks awesome man good job 👍👍

@DRToysCreations Жыл бұрын

Thanks! Glad you like it.

@Ionthegreat 6 ай бұрын

love your channel man, i have been binge watching all of your videos. Keep up the amazing work!

@DRToysCreations 6 ай бұрын

Thanks so much!

@sneakersaints777 Жыл бұрын

should customize a trooper to sit in this thing, amazing.

@garzilla7123 Жыл бұрын

I want to see you build The Crashinator and the Moon farmer driving her from Futurama Season One Episode Two.

@shiloallard9790 Жыл бұрын

Wicked awesome man

@DRToysCreations Жыл бұрын

Thanks!

@BPCustomCreations Жыл бұрын

That thing looks slick!

@DRToysCreations Жыл бұрын

Thanks man! Love your Beatle Bot!

@eduardomorales7799 Жыл бұрын

Great design as always friend !! I would like to be able to give my designs that great color detail. Greetings from South America as always!!

@DRToysCreations Жыл бұрын

Thank you! Cheers!

@gabrielvaldez6877 Жыл бұрын

i love it

@DRToysCreations Жыл бұрын

Thank you.

@applehead6179 Жыл бұрын

Nice build

@DRToysCreations Жыл бұрын

I'm glad you like it

@jdioramasjdioramas2814 Жыл бұрын

Too cool bro great work

@DRToysCreations Жыл бұрын

Thank you! Cheers!

@paulknappcollections Жыл бұрын

Another awesome build. Still hopeing to get you on my livestream one Monday evening if possible. Thanks

@DRToysCreations Жыл бұрын

Sure thing. Hit me up on Instagram again.

@paulknappcollections Жыл бұрын

@@DRToysCreations I don't have instragram sorry. I just do Facebook messenger. Do you have an account?

@DellenEdson Жыл бұрын

What kind of glue is that? The nozzle on the bottle is perfect for kitbashing ✨

@DRToysCreations Жыл бұрын

I use BSI Insta-Cure Med Gap Fill. It’s my go to glue!😃

@DevilsCustomsandCreatures Жыл бұрын

Looks killer man. I'm a sucker for speeder bikes. Now you need to bash a Bike Scout to ride it

@DRToysCreations Жыл бұрын

💯!!!

@bjscustoms Жыл бұрын

Dude...this build is amazing I love how it turned out

@DRToysCreations Жыл бұрын

Thanks!

@Nomadicgear-sd6tw Жыл бұрын

Love the idea that someone could have repurposed the cannon off of the AT-TE to make a speeder bike

@DRToysCreations Жыл бұрын

As soon as I took it apart I knew what I had to do!😂

@Nomadicgear-sd6tw Жыл бұрын

@@DRToysCreationslove your videos, would be a cool Star Wars canon vehicle

@enricoorsettopavan9892 Жыл бұрын

Many thanks My Friend 🫶💪💪💪 ⭐⭐⭐⭐⭐ Amazing

@DRToysCreations Жыл бұрын

For sure!

@tonyspov2686 10 ай бұрын

Great job man ! You should work for Watto

@DRToysCreations 10 ай бұрын

Thanks, I’m not familiar with Watto. Is that a studio?

@urushi-art Жыл бұрын

🚲

@MakinHicks Жыл бұрын

Man I love everything about this one. And 1:18?…❤❤

@DRToysCreations Жыл бұрын

Thanks!

@gundamrx792 Жыл бұрын

wing is from a vulture droid in starwars

@DRToysCreations Жыл бұрын

Awesome! Thank you!

@Gripfastvids Жыл бұрын

Another wonderful job! Q: What do you do with all your builds? Scrap older ones?, sell them?

@DRToysCreations Жыл бұрын

For the last two years I have taken them to Designer Con in CA and sold them.

@madaddewelik2094 Жыл бұрын

это мегакруто!

@DRToysCreations Жыл бұрын

Thanks

@erikvina3587 Жыл бұрын

Great build, looks like it would fit right in with Star Wars. Quick question Dave, do you ever use a sealant for your paint jobs? Can you recommend any?

@DRToysCreations Жыл бұрын

Yes I do, I normally just use a Rustolium Matte or gloss clear in a rattle can.