I have one of these beautiful beasts in 45-70 with a 10 inch barrel. They're not exaggerating about the quality either. It is solid, smooth and finely finished. Best revolver I own by far.

Absolutely beautiful, and the guns are very nice too!

A machine like this could bring Law & Order back to Minneapolis

Hi Alexa. Hello to the folks at Magnum Research. I just wanted to say that I absolutely love my BFR, in 45-70. 10 inch barrel. It was my first handgun purchase. It is a magnificent piece of machining. By this point in time, I have polished it so much, it has a mirror finish. In 5 years I have put everything I can get my meathooks on through it. I work in a firearms store, so I have my choice of ammunition. Including some pretty incredible handloads. Modern Marlin loads included....no signs of over pressure. 300 grain up to 540 grain hand cast. I have never experienced anything other than joy while I've owned it. As a mechanic, heavy duty, automotive, commercial transport,and, machinist, I compliment you folks on this piece of hardware. I have purchased several handguns since, but, this is still my favorite. From Tokarev to Rugers. Black powder Pietta. .44 magnum Super Redhawk. My B.F.R, is my favorite. I wanted a T.C. in .45-70 so I could match my rifles. Upon stating my wishes to the owner of the store, who is now my boss, suggested you product. I jumped on that instantly. ... A decision I have never, in any way regretted. It never fails to elicit comments of wonderment and awe at the range. I let anyone that wants to, fire it. This gains more comments. Thank you folks once again... A diehard fan, here in Canada. Joe...

Can't wait to pick mine up. It finally shipped!

The Magnum Research BFR short cylinder is a rough copy of the Freedom Arms model 83 field grade. The first Freedom Arms model 83 came into production in Freedom Wyoming in 1983. I own a Freedom Arms Premier Grade model 83 in 454 Casull with accessory cylinders in 45 Colt, 45 Winchester Magnum and 45 Automatic. Now this a an excellent made revolver.

A BFR is definitely my dream firearm. Looks like such a great design. Classic, but modern.

Wow that's a big f@#$ing revolver, good job Kahr!

500 Linebaugh 5.5 from the factory. Noticeably beefier frame than Ruger SBH and RH. Smooth trigger pull, very accurate and recoil is manageable. Light enough to carry on my hip cross draw all day. No fear of grizz, mountain lion or Sasquatch. Love it.

I have a Ruger Super Blackhawk. These look so fine, and big.

I have the BFR in 500 S&W Magnum! This thing is a Cannon!

Again thank you these videos are glorious.

Single action design is useful for bigger powerful calibers because the simpler action is more durable, plus you don't risk double shots that happen under intense recoil like with a double action. Not to mention the ability to have every shot be as precisely placed as possible, because of the finely tuned trigger.

I meet Alexa score in Instagram before this video and we become a friend she's a cancer survivor with strong and rich heart miss you girl

I was going to buy a second ROA,but price point made me decide to get a 10" BFR in 45-70.I plan on mostly plinking with Black Powder loads,from 192 grn collar buttons,to 350 grn cast.Very similar to my Walkers for powder capacity and gun weight,but able to throw much bigger lead,more comfortable to shoot,and residue is confined to barrel and cylinder,not thrown into the lock and hammer mechanisms like cap-fired BP revolvers,so cleanup should be much easier. Thanks for making a great US made revolver at a working man's price point!

besides the model 29, .44 for me...absolute best looking revolvers on the market. :D

Love your guns. And this vid. Thanks for sharing! T.

Impressive beautiful " American Style " congratulations thanks regards ,bye

They are so beautiful!

I like to see them make a Schofield one day.

Wow. Beautiful weapons. I want one. But I gotta say- they're not the only extremely well put together thang in the video...

Cowgirl gets her gun ! Impressive....

I enjoyed watching this video thank you

Wow nice .high tech revolver gun making. .

now *THAT,* is a handgun! 🤩

Minnesotans doing what God put 'em on Earth to do!

The 45-70 BFR reams out to 458 Win Mag. ✨

I own a 45-70 and a 22 hornet BFR I love them both.

I've had my BFR in 45/70 for years with north of 1000 rounds down the pipe. It is absolutely the most accurate handgun I have ever owned bar none! I've shot squirrels, rabbits, coyotes, skunks, fox, and deer, one shot and done!

I have a 500mag and a 4570 mag both with 10" barrels. I wanted a 450 cylinder for my 4570 because of the lever action rifles I own. I have a couple 4570 rifles and I wanted pistols to match. But im retired an can't afford the 450 cylinder now. I love the pistols very much.

This was awesome, glad you let Edwin share it. Is this going to broadcast anywhere?

The Bigger Iron

so cool

That's a Big F'ing Revolver!

Not much recoil on the 30-30. Beautiful revolvers.

Nice!

You Americans have a great sense of style. I love the fact that BFR stands for Big Fucking Revolver.

I don't lown a BFR but I DO own two Desert Eagle's which are made in the same facility; a TiN .50AE (gorgeous!), and an early five digit serial number sold in 1991 .44 Mag DE. I can attest the customer service is second to none. They'll take the time to communicate, ask questions and get done what you need. For me it was a simple tune up for the .50 just to make sure it was perfect as I use it in a chest rig for the Bush here in Alaska, and the .44 for new springs and cleaning from the bottom up; it was kinda nasty inside.

Que bonitos revolveres, ya había visto esa marca, son muy caros..!! La fábrica en si es chica,; pero tienen muy buena maquinaría..!! Son armas finas y están muy bien hechas ..!! Me gustaron mucho, a mí me fascinan las armas muy grandes..!! Saludos a todos los que están involucrados en la manufactura de esas hermosas armas..!!

When I think of Revolvers I tend to think of Dirty Harry and the Model 29.

Очень хорошее видео!!!Я с удовольствием заказал бы у этой фирмы револьвер 410 калибра!!!

I hoped I could have paid you folks a visit while I was still trucking but to no avail.

I’ve been saving for a freedom arms revolver for some time. Thank god I found these before because I’m just really wanting a 475 linebaugh without having to spend 3k+.

I bought one in 45/70 with a 10 inch barrel back when they first came out over 20 years ago, I wonder how they compare to the ones being made today , are the ones being made now stronger due to better technology and materials? I've really never fired any super hot loads in it because I'm not sure how it will hold up.

You guys make absolute beautiful weapons. No-homo but God I love you MR.

Hello, great revolver. Question. Rifling, Oil?

These guns look like copies of the Freedom Arms single action guns. I have a Casull 454, which is an outstanding cowboy style firearm. As I aged, I gave in and had it ported to reduce the blow back. Helped.

Can you make a stainless steel 10 inch barrel for a wore out 10 inch Dessert Eagle stainless from the 80's

Id love to work there..

I hope someday I can get one of them. I have some powerful revolvers but I want one that is even more powerful than any Smith and Wesson firearm.

With all the craziness in the world...I gotta ask. Can I still design and order one of these currently??

Hello, "YOU GO GIRL, 50Cal WOOHOO"!!!🤗 That's the cal of revolver you designed, right???🤔 Nice plinkin' for sure. Would have to try those and the upper ones to know which I'd like, been yrs. since I'd done a .357.... Have fun and be safe, take care, "God Bless", sincerely, Randy. 👍👍🙏😇👊

Cool can you make mags for my cw45 that actually work? I have to use 1911 mags and only a few of those work right..... It is frustrating

It could be fun if there was a BFR carbine. I won't lie. My wrist gets delicate after factory 44mag recoil. I'd want a stock for some of those moose swatters.

Me like big gun it go big boom

I dont know what outdoors you guys go to, but never ever have i needed a revolver that f**king big there lmao

I could watch this gal sell snowballs to polar bears !

Excellent video. Good job guys! Wish that gun was legal in the commie state of MA. I would own one!

I'm seeing this gun more and more. I'll probably buy one. But The Python is first on my list.

You're a regular Annie Oakley. You didn't miss the target once.

Muito linda. Ah ! e a arma também.

Do they make a 10mm Magnum?

So BFR actually stands for Big F%$@ing Revolver? lol Love these revolvers!

Qual calibre ela calça? Não saquei.

Yano i need one of these in 357mag to go along side my Henry rifle chambered the same!?! I have wanted a cowboy revolver for years? Now that i have one of my dream guns in my possession (A HENRY) golden boy in all brass i would love a revolver tricked out in brass. Do you guys make any that are golden in color?lol I think it would look kind of funny in silver to go with my all brass and wood Henry. It dosnt really matter as i would love one of these anyway!!! You sold me! It didnt hurt that you guys had a great looking gal in the video either! :>)

Is this a competitor to the SW 500 magnum revolver?

Forged or cast

Got the 350 legend nice job guy's !!! Will be buying another bfr ! Also good job on the interview young lady you should be a model you are very butterfly and a good shot !

what kind of load was she using to produce a recoil like that? that's like a primer and salt bae loading the powder.

Give her the 45 70. She made that 50 look like a 38 going off

Now that's a handcannon

Why don't you make a pic that can take 460 S&W + 454 casual + 45 LC ? or 454 + 45 LC + 410?

I bet testing everyone gets to your hand after awhile.

Revolvers were made earlier than 1873

Big fucking revolver revolver

She was obviously not Shooting a BFR caliber at the beginning of this vid.

Why is there bfr illegal in California. I don't get it

Big fucking revolver

I call it Big Fucking Round

Threw past experiences i have little use for Kahr arms. They might have improved by now but theyre early products (thompson and 1911) were garbage

Teacup

Makes me wonder why revolvers are so expensive

👍👍👍💜🇮🇩🇮🇩🇮🇩

Scroll to 16:50 and Thank me

I like my name. Big fucking revolver 😊

Well I call it Big Fu$&@! Revolver...!!?!

“Biggest Finest Revolver” we all know damn well it really means “Big Fucken Revolver”

I only own two BFRs, both are long cylinders chambered for 45-70, the first is the Standard 7-1/2-inch barrel and the second is the Bisley 7-1/2-inch. Both 7-1/2-inch revolvers have a balanced feel, shoot great, and the trigger pulls are crisp. My only real comment (complaint) is out-of-the-box, there is no pistol case included with either revolver and only the cardboard shipping carton is what all new buyers receive. On the KAHR Firearms Group, BFR website, there is no aftermarket case offered for any BFR revolvers and the prices are on the higher side of retail with no customer consideration of sales prices offered for new handgun purchases or seasonal discounts for Memorial Day, Fourth of July (Independence Day), Veteran's Day, Black Friday, and even the Christmas Holiday Season which other firearm manufacturers do offer to their customers and also offer to the general public (Beretta, Mossberg, Remington, and Ruger). When someone spends in excess of one-thousand dollars for a handgun it sure-otta come with a lockable protective case; even the standard two-holes, one on the top and one on the bottom are sufficient for a small TSA 4-combination lock (with shackle or cable) to satisfy most restrictive state legislation and also to keep small-curious hands away from the contents. I sure hope KAHR Firearms Group reads this comment and pays attention, that all handguns should come inside a lockable protective case, and at a bare minimum, a plastic case with the ability to be locked from the outside like other reputable firearm manufacturers include with their quality handguns including the likes of Beretta, Colt, Glock, and Springfield Armory to name a few. In addition, the inclusion of a one-piece plastic cleaning rod and combination barrel and nylon-cylinder brush would also be a thoughtful and considerate touch to customers. In many states, when being transported, firearms have to be unloaded and inside a locked case. Since this quality single action revolver is made in the USA and should be compliant in nearly every state, I was rather surprised that there were no specific instructions on how to lock the cardboard shipping carton.

Det er rett og slett en pistol som bruker kamprifleammunisjon.

I read that I personally couldn't just order a 450 marlin cylinder for interchange in my 4570 marlin that the tolerance would have to be matched with my pistol at magnum research. I would order one today if I didn't have to ship my gun back to M.R-BFR. IM afraid to attempt shipping nowadays with this fake virus besides I live on fixed income now. I wish you could say, yeah we will ship you a 450 marlin cylinder. Ive these 2 guns since late 90s. If the right person reads this message maybe they could help me. Thanks folks. 50yrs trucking an Im retired with arthritis and I dont get to shoot them without wincing a bit although im big an tall with baseball glove hands. I wish you folks could fix me up. They were $80 a cylinder then. Have a merry merry Christmas 🎅 good folks an your family's. I love guns as I have over 50 assorted pistols, rifles an shotguns. ☺😁

Wheeler and Topping did it first, with stretched super blackhawks

Smoking hot! The girl is pretty too 😀

Without any facts, it's just an ad feature.

I don’t like the look of the grip handle.

id let her ride my pony

BFR DOES NOT STAND FOR, "BIGGEST FINEST REVOLVER."

Stop pretending like it doesn't stand for big f'in revolver

Nice guns and craftsmanship, but my Lord are they ugly.

What blasphemy cheap no case.