MADWORKS RG Sazabi Etching Parts Honest Review!

Рет қаралды 15,343

5 жыл бұрын

We give our honest opinions on the Madworks Real Grade Sazabi Etching Parts Review!! Is it right for you ? How do you assemble the parts ? what are the tools you need ? We got the answers in the video!
You can buy the Madworks parts below :
Madworks TW : / madworks.tw
Madworks MY : / madworks-malaysia-1650...
ATT : / angeltrendtrading
#madworks #gundam #sazabi

Пікірлер: 49

@AwesomeToysTV 5 жыл бұрын

You can buy the Madworks parts below : Madworks TW : facebook.com/madworks.tw/ Madworks MY : facebook.com/MADWORKS-Malaysia-165029020962044/ ATT : facebook.com/angeltrendtrading/

@Daobobs 5 жыл бұрын

Here's my suggestion, since I hadn't seen one yet. Put your photo etch parts on a *hard* surface to cut them. I use a smooth gloss ceramic tile (random bathroom tile that I've stuck little felt feet to). The hard surface helps keep things nice and flat so the knife can cut without bending or warping the aluminum.

@AwesomeToysTV 5 жыл бұрын

Thanks for the tip !

@7g6f5e4d3c2b1a 5 жыл бұрын

The approach to handling/applying Photo etch in this video is Savage and Barbaric! However all is forgiven for admitting your inexperience to the viewers.

@AwesomeToysTV 5 жыл бұрын

Yeah, it was a trial and error for us 1st timers! If we can put on the parts, I am sure even mid level builders should be able too

@MFKR696 4 жыл бұрын

Just a friendly tip: If you get CA anywhere you don't want it, just lightly use a q-tip dipped in some Acetone. Not so much that it's dripping. Just enough to make it wet. It'll make quick work of it.

@mechaunidragon3635 5 жыл бұрын

This is really cool really adds that little extra detail to make the kit pop and on one of my favorite kits of all time definitely going to try and get my hands on these to try it out

@humanmold 5 жыл бұрын

Got this awhile back,just got the HG Sinanju Stein version (with decals).

@dsleong8328 5 жыл бұрын

It's actually not hard to apply etch metal parts, but you do need to have the proper tools like a plier or metal ruler to bend those parts

@AwesomeToysTV 5 жыл бұрын

Yeah, it was our first experience..... we will improve the next round !

@franco3584 5 жыл бұрын

Great Video Guy's, Nice job for first time with Photoetch . I'm going to have to get this set.

@aganej2 5 жыл бұрын

I just ordered these! Hope it comes with water slides, I'll definitely be studying this video to get some tips and tricks. Any other big insights on using these parts? It'll be my first time using them, but not my first time using metal + super glue. Definitely planning to disassemble parts to work on them before hand.

@Joels_92Problems 5 жыл бұрын

Hi there, Zul here. Dude, if you’re more experienced in handling these you’re gonna have a much easier time than we did doing this. Though there is a part we forgot to mention. When you get to the lower legs (the huge umbrella calves), you’re going to be applying these THIN etching strips to these very SHALLOW channels. So, I’d suggest planning on how you’re gonna apply adhesive to this as to not let the glue bleed out. Lastly, the upgrade kit does not come with an instruction manual. So, you’re definitely go be relying on reference photos. Thankfully we did include said reference photos in the vid. If anything else, good luck

@ascensionindustries9631 5 жыл бұрын

Some photo etch parts looks cool but really stand out against the painted plastic. I would like to see a kit use these for detail but be painted over for a more seamless color scheme.

@khaar1898 5 жыл бұрын

I think it looks awesome, I've seen a video of someone that painted the Zaku gun with the photo etch parts and that makes them blend with the suit much better, you can paint the etched parts in same color as the attached part or slightly off color for some color separation.

@dialect64 5 жыл бұрын

Just got my set today... Not worried about the actual process, but worried about the contrast of the metal details to the rest of the kit. It is so gorgeous on its own just snapped up. I may end up with a nonstop itch to keep customizing to the point I need a backup rg sazabi I leave alone lol

@AwesomeToysTV 5 жыл бұрын

Hey thanks for watching. I would suggest doing a gloss finish on the kit to make the add on look more natural with the kit

@maitynpedrosonapoleao8230 5 жыл бұрын

To be fair i think it got the added look in stead of a merged look... so im not sure about it.

@dtejada1988 5 жыл бұрын

Zup guys! It looks great. You guys did a pretty good job. I liked it😎👍🏼

@AwesomeToysTV 5 жыл бұрын

hey thanks for the kind comment!!

@primusvsunicron1 5 жыл бұрын

Add some markings from the RG Sinanju

@milesparker6555 5 жыл бұрын

Dude do u think using epoxy is better than super glue? Just asking 4 opinion

@AwesomeToysTV 5 жыл бұрын

Are you referring to the photo etching parts for the sazabi?

@milesparker6555 5 жыл бұрын

@@AwesomeToysTV yeah

@AwesomeToysTV 5 жыл бұрын

We can't comment on that as we didn't try .

@DEFONNING 5 жыл бұрын

Hi, I went to the Madworks Malaysia fb page but it says contact their reseller to get one. I'm not sure who to contact or just send them a msg through fb?

@vincentlee6909 5 жыл бұрын

You may check out this post, they do mentioned the dealers in Malaysia. m.facebook.com/story.php?story_fbid=401666063965004&id=165029020962044

@AwesomeToysTV 5 жыл бұрын

You can contact (PM) Alex from Angel Trend Trading. facebook.com/angeltrendtrading

@jcdebelen2344 5 жыл бұрын

Can we use the tamiya cement for these?

@AwesomeToysTV 5 жыл бұрын

No you can't unfortunately as cement will not work with aluminium.

@jcdebelen2344 5 жыл бұрын

Thanx!

@brennan4118 5 жыл бұрын

How do I buy these and do they ship to Canada??

@AwesomeToysTV 5 жыл бұрын

Hey man, do check with madworks Malaysia. The etching parts are flat and not that heavy, shouldn't be any issue for them to ship anyway in the world if you ask us ! Thanks for watching!!

@AwesomeToysTV 5 жыл бұрын

You can also contact Mr. Alex from Angel Trend Trading - facebook.com/angeltrendtrading

@erek200 5 жыл бұрын

>putting superglue on a cutting mat *BIG OOF*

@MFKR696 4 жыл бұрын

It's just a cutting mat, bro. It's meant to be abused. A little bit of acetone on a q-tip will fix that in a hurry anyways, and that's in the odd case where you can't just flake it off with a razor blade.

@erek200 4 жыл бұрын

@@MFKR696 at least put it on some masking tape on the mat, then put the super glue on it. You can get rid of the glue immediately by ripping the tape off, and the glue wont soak into the map. God knows I've abused my cutting mat enough.

@MFKR696 4 жыл бұрын

@@erek200 Fair enough. I just don't have a lot of time to waste on menial stuff, so if I get CA on my mat, if it's bad enough, I'll use acetone to knock it down. If not, I just leave it until it chips away on its own. Then again, I don't see much point in keeping your cutting mat under your work while assembling things. Personally, I cover the business end of my work table with paper. If the mat doesn't need to be there, it should not be there.

@MFKR696 4 жыл бұрын

If people need to be told how to use Cyanoacrylate (which their parents should have done a long-ass time ago btw), they really have no business working with PE parts. They're clearly of the "I glued myself to the table" crowd lol. I once knew a guy so stupid that he glued his palms together with CA, and then when I told him to use Acetone, he said what amounted to "Fuck that. I'm too tough for Acetone" and peeled his hands apart with all his strength. Let's just say there was an ambulance ride involved very shortly after. The sound his skin made, coupled with his screaming shortly thereafter, still makes me cringe to this day when I think about it. 'Twas quite the memorable sound. I would describe it, but that would only gross everyone out. It will suffice to say that if you don't know what you're doing, stay the hell away from Super-Glue. It's not to be trifled with, and much like me, it does not suffer fools. One should have a healthy level of respect for such things.

@AwesomeToysTV 4 жыл бұрын

Hahahahah what a story!