Maiden JU-87 G STUKA with Roto 85 FSI

No video

Maiden JU-87 G STUKA with Roto 85 FSI

Рет қаралды 3,638

Schopfe2011

Жыл бұрын

Wing: 2,57m
Engine: Roto 85 FSI
Weiht: 16kg with fuel

Пікірлер: 26

@DanielMigneault 6 ай бұрын

Such a beautiful plane, well done.

@Schopfe2011 6 ай бұрын

Thanks a lot!

@bastit.6 Жыл бұрын

Sehr gut Ulrich 👍

@dr.wilfriedhitzler1885 Жыл бұрын

Was für ein ungeheurer Bauaufwand und wie perfekt. Die würde ich der Filmindustrie für Aufnahmen anbieten.

@Schopfe2011 Жыл бұрын

Danke aber so gut isse auch nicht. Mehr kann ich nicht:)

@justlovelyaintit 7 ай бұрын

@@Schopfe2011 Keine Sirene eingebaut?

@Schopfe2011 7 ай бұрын

Hi, nein die G Version hatte keine Sirene

@justlovelyaintit 7 ай бұрын

@@Schopfe2011 Danke viel mals.

@Baumflieger Жыл бұрын

Sehr schön 👍

@Schopfe2011 Жыл бұрын

Danke Marco

@MrMadtractor 9 ай бұрын

was this an arf or which model plan was used ! this looks amazing

@Schopfe2011 9 ай бұрын

Morning, the Ju87 is from cymodels. The guns and the canopy are from Nick ziroli. Thanks. Best regards Uli

@ursroduner8131 Жыл бұрын

Da ist noch viel einzustellen der Flieger hängt ja richtig beschissen in den Kufen

@beyondxtream4056 Жыл бұрын

CG a little bit aft?? Or maybe some additional aileron differential?? The Stuka seems to hang down with it's tail when flying a banked/rolled turn.

@Schopfe2011 Жыл бұрын

After the flight the Ju87 get more weight in the nose. And I have problem with the ruder servo. It was defect. fixed it. We will see it next spring/flight

@MrRmotyka 7 ай бұрын

Hi, Currently flying the fokke Rc 109 inch stuka with a zenoah g62. slightly underpowered and thinking off putting the Roto 85 in. Did you ever have any issues with over heating on any of the cylinders and are you happy with the performance of this engine. Many Thanks

@Schopfe2011 7 ай бұрын

Morning, the Roto is a good engine but I think there is not more power like the g62. I use at the moment a 2 blade 24x14 prop. At the beginning I have some cooling problems but I change the air flow. Now its ok. What is the weight of your Stuka?? Best regards from Germany Uli

@MrRmotyka 7 ай бұрын

Hello, Thank you for your reply, my stuka comes out at about 10-11kg. I am also having issues with the G62 over heating. Regards Richard.@@Schopfe2011

@dr.wilfriedhitzler1885 Жыл бұрын

Der Motor müsste aber mehr können. Vielleicht mit einem Zimmermann-Auspuff und etwas magerer Einstellung?

@Schopfe2011 Жыл бұрын

Richtig erkannt. Ich hatte 500 Umdrehungen zu wenig.motor wurde viel zu heiß. Muss noch an der Luftführung arbeiten. Wo der Motor wieder abgekühlt hatte waren die 500 Umdrehungen wieder da.

@dr.wilfriedhitzler1885 Жыл бұрын

@@Schopfe2011 Ja, wenigstens scheint kein dauerhafter Schaden am Motor entstanden zu sein. Eine respektable Leistung, dieser Bau. Wird da auch der Hans-Ulrich Rudel geehrt? Hoffentlich doch!