Make A Carbonfiber Fender from a 3D Printed Mold
Рет қаралды 4,114
Күн бұрынHere is my whole workflow/process on taking my 3d printed mold and laying down the cf with all other elements. Vacuum bagging and infusing. Start to Finish. I am no pro and learning as I go, but so far this process has been working for me with results I am happy with.
Chapters:
0:00-0:49 - Intro
0:50-6:28 - Laying Down First Layer
6:29-10:03 - Cutting and Added Second Layer
10:04-12:19 - Adding Peel Ply
12:20-13:47 - Adding Flow Mesh
13:48-17:19 - Setting up Vacuum Bag and Hoses
17:20-27:04 - Vacuum Bagging the Mold
27:05-32:59 - Finding leaks and finalizing Vacuum Bag
33:00-36:55 - Mixing Resin and Degassing
36:56-39:59 - Infusion Process
40:00-44:44 - Demolding
44:45-45:38 - Final Results
@3-4engineer 2 күн бұрын
I don't know what I love more, the final part or that R35 on your garage... Great content man, keep going!
@scurtudarius2051 13 күн бұрын
I have a tip that will make your life 10x better. Use freeze spray before removing the gummy tape. It will leave no residue and the tape will come off in one clean piece. Thank me after you try it out. :)
@poltdesigns 13 күн бұрын
@@scurtudarius2051 oo!! I need to google this stuff. I did try remove gumtape after freezer one time and it sucked even more than warm lol
@scurtudarius2051 13 күн бұрын
@@poltdesigns trust me, i ve been in the carbon industry half of my life. I dont leave it for anything. I use kalte spray from weicon. Idk if you can find it in the us but it s available in europe
@poltdesigns 13 күн бұрын
@@scurtudarius2051 Thank you!! I just ordered a can. Not the one you use but another freezer spray thats also labeled as "Mould Release". Looking forward to trying!!! Appreciate the advice!
@scurtudarius2051 13 күн бұрын
@@poltdesigns no worries. 👌 you should also move towards prepreg. Much easier and cleaner to use.
@mikescholz6429 9 күн бұрын
I would instinctually reach for a heat gun to relax the adhesive… I wouldn’t have guessed that freezing would work as well.
@PorscheMonster 17 күн бұрын
Very thorough video showing your workflow! Thanks for sharing/
@DJdefslap 17 күн бұрын
Awesome job! Great tips also.
@MrLego-lx8ke 13 күн бұрын
never seen this before, really cool video
@mispeaced 13 күн бұрын
Fantastic result! 👍
@willfrank961 12 күн бұрын
Congrats! The part looks great. If i got this back from a professional i'd be happy with it.
@danielmclellan7762 14 күн бұрын
I watched trying to figure out how your fender was going to inflate ( I was thinking boat fender)
@jerrychen7084 14 күн бұрын
hey man! awesome vid. Been following this as a tutorial to figure out what to purchase to get my own vacuum infusion setup going. Would you be able to put up some links to the materials you used? Mainly the digital vacuum gauge, and the actual vacuum and hoses/connectors. I was able to find the resin and stuff on US Composites. Thanks!
@shenyong8054 2 күн бұрын
Good job! Do you sell it ? I would like to buy.
@user-ix4ky3ce8f 17 күн бұрын
Look like a face droid star wars😅
@hunterjames5819 17 күн бұрын
Your part looks great! Did you clear coat the part before you showed the final, polished part?
@poltdesigns 17 күн бұрын
@@hunterjames5819 yeap. 2 sessions of clear. First one was a base to level out. Second was final shell with wetsand.
@hunterjames5819 17 күн бұрын
@@poltdesigns Does the 3d spray adhesive leave any sort of residue on the surface? I can't see if it leaves small marks on video
@poltdesigns 17 күн бұрын
@@hunterjames5819 so the 71 is a lot more friendly than 77 but def does leave something if abused. I try to be super minimal with it but sadly its still there. Wetsanding the cf layer does help remove most of it but once cleared its really hard to see.
@hunterjames5819 17 күн бұрын
@@poltdesigns OK thank you! I currently use super 77 but I would like to try something different.
@poltdesigns 17 күн бұрын
@@hunterjames5819 ya 71 is made for composite and a lot more forgiving. 77 is just too sticky for my liking and the nozzle doesnt mist like the 71 does.
Saida Props
Рет қаралды 8 М.
James Pray
Рет қаралды 66 М.
Amazing Children Toys
Рет қаралды 11 МЛН