Make a COCONUT Husk Removing Machine - peeler coconut peeling

Рет қаралды 397,968

Күн бұрын

Subscribe to Creantho on KZfaq: bit.ly/2Q1eDmC
This is a Hand Operated Coconut husk peeler/ remover made /coconut husking machine / DIY home made machine by Nishan Sri Lanka. It's really easy to Operate. even a first time user can dehusk the coconut very easily.
Coconut dehusking Machine
Very economical to produce, Just need some Iron and Welding Skills
. by the way this is my First Welding Job..
After making and doing some Coconut Husk removing/ testing I have Donated this Tool/ Machine to an Industrial coconut peeler in Kandy.
Hope they find this Useful.
an Indian farmer first created this item. the concept is the same - We need to promote this eco- friendly , energy saving, zero smoke and no heat machine which requires no electricity to those who are suffering from Coconut Dehusking Job in their entire Life. most of them are suffering from Occupational Dis- orders due to continuing the same routine job in their entire Life (20-35 years). Please spread this..to ease them..
Thanks for Watching my Video - DON'T FORGET TO SUBSCRIBE
My Contact - 0715519975 (Nishan)
................................................................................................................................................................
You can Buy This type of Coconut Dehusking machines from below link - 3rd party suppliers
දේශීය නිෂ්පාදකයින් සදහාම වෙන්වු www.udarata.com
udarata.com/pr...
#coconut #openner #CUTTING

Пікірлер: 164

@inamnaufer Жыл бұрын

I'm not only happy but, Proud. It's so refreshing to see our own people do well on KZfaq. 🙏

@elsatineg1850 3 жыл бұрын

Hi, I love this machine. I'm from a pacific island, with coconuts everywhere. The lever on this device makes husking so easy. Brilliant!

@renantemalinao8677 4 жыл бұрын

This husker is good for hundred pcs of matured coconut. Imagine a mountain of 25 thousand, large and matured coconut. In my twenties I can husk 3k pcs from 7 AM to 4 PM just by using traditional husker (plain straight sharp pointed piece of leaf spring fixed on a wooden post)

@jlcolis1995 2 жыл бұрын

Here in the Philippines we use only teeth for husking 😅

@rishadar 11 ай бұрын

We have machine husk 25k, this is for house hold we have 10 to 20 trees in houses which produce 200 to500 coconut

@jerriobial6312 3 жыл бұрын

This is good . Simple yet effective

@hicoteo 2 жыл бұрын

I made one of these based on your video. It turned out good. Thanks.

@creantho 2 жыл бұрын

Great to hear!

@kw-trin 2 жыл бұрын

made one using your video as inspiration. thanks. I made the lever to pull down to open instead of raise up to open though...seemed easier to operate by pulling down.

@creantho 2 жыл бұрын

Fantastic!

@subramaniana7761 4 жыл бұрын

We have the same item for more than, 15 years in kumari district. Good things

@creantho 4 жыл бұрын

Yes, this is available in India. a farmer was first created this item. concept is same - We need to promote this eco- friendly , energy saving, no electricity, dust or heat, .. tool to The Who are suffering from Coconut Dehusking Job in their entire Life. most of them are suffering from Occupational Dis- order due to continuing the same routine in their 20-35 years. Please spread this..to ease them..

@mahendramanwar4020 Ай бұрын

V nice👌

@ponemtraveler6646 4 жыл бұрын

Amazing son love his father

@johnnykay8261 4 жыл бұрын

Thanks for sharing and for your knowledge on how to construct this type of tool. Much appreciated.

@creantho 4 жыл бұрын

Thanks for watching!

@coconutshow5956 3 жыл бұрын

Great workmanship

@zktube 4 жыл бұрын

Awesome! Thank you!!!

@nandanakarunathilaka5854 4 жыл бұрын

නියමයි තව මේ වගේ ප්‍රයෝජන වත් උපකරණ නිපදවන්නට ශක්තිය ධෛර්යය ලැබේවා 👍👍👍

@creantho 4 жыл бұрын

Many thanks for the encouraging words..

@user-fd7wx2pz3c 7 ай бұрын

Bro never use a cutting disk as grinding wheel your using all safety gear s but be aware of using tools .good video

@vedmys 3 жыл бұрын

If use ur feet to press the lever, ur both hands would be free and peeling would be quick enough. a suggestion 🙏 .

@creantho 3 жыл бұрын

Thanks for the idea

@k.antonyjosekottackal2626 3 ай бұрын

Good

@danu3812 Жыл бұрын

A good innovation brother.👍👍👍

@claudinebarnaby347 4 жыл бұрын

Great job...

@jippujacob 4 ай бұрын

The person husking the coconut is struggling due to the excessive height of the blades and the hand-lever. This may be ok for a very tall person, but not for a person of height up to 5' 6'' or so. At the present height of the tool, it becomes difficult to (i) impale the coconut, and (ii) pull the lever. The best tool-height for a person of average height is 45-50 cm.

@gimhanikavindya6938 4 жыл бұрын

Nice ..👍

@rahulrajgor8784 2 жыл бұрын

Very good

@mohammedalthaf4826 4 жыл бұрын

Great idea bro 👍👍🔥

@chandranieliyanage8981 Ай бұрын

How to buy this tool.It looks very safe to handle.

@HenryVG525 2 жыл бұрын

Great construction video! Is there a reason for attaching the lever so it must be lifted instead of on the other side to use body weight?

@boharihamen 2 жыл бұрын

I got the same question also! Better to work with gravity then against it

@Tailevu2000 2 жыл бұрын

No gravity in the Southern Hemisphere

@MP-qh2mv 2 жыл бұрын

Has same question. Thought you want to keep the lever on the same side as the stand.. but lever still could be put on the same side and have it use gravity / body weight..

@randynrx Жыл бұрын

if you put the lever the other way then when you let go it will open and you won't be able to spike the hush without holding it up with one hand..Maybe a spring mechanism or a counter weight could solve that problem. But its beautifuly simple as it is.

@ramugurugupalli9855 3 жыл бұрын

Excellent brother.

@rachelperaud1945 4 жыл бұрын

මේක මේ විදියටම හදන විදියත් එක්කම තිබුනා internet එකේ. ඉන්ඩියන් කෙනෙක් හැදුවේ.

@gameshooter1355 4 жыл бұрын

Nice work..&..nice try ..👍👊👏✌️

@kevinmuthu2063 Жыл бұрын

Can it be possible to convert the mechanism? Instead of pulling to pushing the lever. So the body weight can be transformed into energy and much easier for weak people too.

@marioaugusto2584 3 жыл бұрын

Very nice!

@charitosabelliano5092 2 жыл бұрын

Wlng binatbat sa gawang Pinoy

@sharadhadevi7978 3 жыл бұрын

Very nice

@SeedsMusic-ld5kg 4 жыл бұрын

Good Job

@adancerna4263 Жыл бұрын

Bien preciso gracias

@VijayKumar-dx9lf 3 жыл бұрын

Good idea

@atharvgaming2766 Жыл бұрын

Who likes the sound when it peels

@NossoPedacinhodeTerra 3 жыл бұрын

So nice!

@rksnatureworld9170 3 жыл бұрын

சூப்பர், super sir

@raveendranpadachery4792 2 жыл бұрын

Great 👌👌

@SaravananM-pn5pn Жыл бұрын

👌👌👌💯💯💯

@phantasiagrijalba5183 2 жыл бұрын

h\Hey luv, it would be helpful if you had listed a tools & supplies list

@olgameureureugoin5032 2 жыл бұрын

magnifique, Super bravo 👏👏👏👏💖💖💖

@jippujacob 2 жыл бұрын

This is a tool innovated in the Kelappaji College of Agricultural Engineering and Technology (KCAET), Tavanur, Malappuram District, Kerala, India. KCAET is a constituent college of the Kerala Agricultural University, Vellanikkara, Thrissur District, Kerala, India. It was innovated and patented in 1995 (Ref.: Indian Patent No. 192670 of 25.8.1995). Some have suggested to make it foot-lever assisted. Overall, it shall be inconvenient in the following ways. (i) An additional spring is needed to make the foot-lever return to its initial position, after depressing it. So, the operator has to work against this spring when depressing the foot-lever. So, more force is to be exerted, though by foot. (ii) The operator's stability is slightly affected, though for a short time, when lifting one leg to have it placed on the foot-lever. The operator comes to a 1-leg posture. (iii) Stability is affected, also when depressing the pedal with one foot; that foot being in a floating state. (iv) The operator has to alternate between 1-leg posture and 2-leg posture. (v) A larger base is required, on the side of the foot-lever, to prevent instability of the tool when idle. (vi) More number of components are required to transmit power to the movable blade from the foot-lever, which increases the complexity and reduces compactness. (vii) The mechanical advantage derived is less unless the foot-lever is extended, which may require making the base still larger. (viii) Extension of the lever would also necessitate a spring of larger tension or spring-constant to make the lever return to its initial position after depressing. It would cause more force to be exerted by the operator when depressing the lever. (ix) Transfer of a part of the bodyweight to the foot-lever through the leg is an inconvenient process in the light of the operator's instability together with the alternate bending and straightening of the leg. (x) A base is also needed at the free-end of the foot-lever for conveniently placing the foot. On the other hand, the hand-lever-assisted tool has much better conveniences and advantages when considering almost all of the aforementioned. Even the mechanical advantage derived is higher; about 6 (six) with a 75-mm blade and a 450-mm hand-lever.

@creantho 2 жыл бұрын

Very important information and greatly appreciated your valuable time taken in commenting on this video inspired by the Indian creation.

@jippujacob 2 жыл бұрын

Though many versions of foot-lever-assisted coconut-husking-tools have been developed, none has found wide use or attracted wide popularity. Hand-operated tool is simpler, more compact, less-costly, and easier to use. The operator is always stable and well-balanced due to the 2-leg posture. Has a higher mechanical advantage too. - Jippu Jacob

@jippujacob 2 жыл бұрын

I am one of the two inventors of this husking tool. The other is Dr Joby Bastian. Both of us were members of the faculty of Agricultural Engineering and Technology of the Kerala Agricultural University (KAU). We both and the KAU are its patentees (Indian Patent No. 192670 of 25.8.1995). Details are available online. We had studied and analysed the various foot-lever assisted tools. That caused to post in my 1st post above a detailed analyses. - Jippu Jacob

@creantho 2 жыл бұрын

Salute your great contribution to the society. Here in Sri Lanka we harvest 2 billion nuts per year but still using the traditional husking method which is very tedious and results in side effects. So we wish to make people aware of your invention which is a safer method….

@jippujacob 2 жыл бұрын

@@creantho This tool is bound to become popular in the coconut-growing regions all over the world. Let it become a tool of great benefit to the people in such areas. The traditional method with the iron/wooden stake shall slowly become redundant. You may please take the lead in popularising it in Sri Lanka. Let it become useful to the people.

@matpa089 4 жыл бұрын

Show it on a dry coconut with thin husk.. let us see ?

@creantho 4 жыл бұрын

Will do soon..thanks

@atharvgaming2766 Жыл бұрын

Yes it's easy on Green coconuts, but very hard on brown

@PradeepKumaarDash 4 ай бұрын

I need to buy.

@scubador 2 жыл бұрын

Brother nice design. Anyway to get the dimension and measurements? Thanks

@creantho 2 жыл бұрын

Thanks brother, pls refer this link for measurements kzfaq.info/get/bejne/eNCBbJOYuLbaqac.html

@rashmisfoodfeed1846 3 жыл бұрын

Nice👌👍🔔❤

@rlatchman 2 жыл бұрын

Thanks to you bro i made one of these an is the best thing ever to husk coconuts. #BIgupyuhself

@creantho 2 жыл бұрын

Glad to hear bro...

@chathurangahmjc3963 4 жыл бұрын

නියමයි

@sudeerkumarpusala9820 2 жыл бұрын

Super. Bhayya. How much cost.

@anuradhapavithrani2077 4 жыл бұрын

Oya liver eka anith peththata demmanam pahalata weda karanna oyta lesiy kiyala mata hithenawa, kakulen wunath weda karanna puluwan

@tharindumadhawa5172 3 жыл бұрын

ඇත්ත

@babureddy5394 Ай бұрын

How manch rate this one

@pramodshinde8788 Жыл бұрын

हमे ऐसा बनाना है हमको बनाकर मिलेगा या नही कृपया हमको बता दो

@jeewanthamapa3608 4 жыл бұрын

Wow

@MadushDiwyangana 4 жыл бұрын

👍

@maryc530 2 жыл бұрын

Can I purchase one? I have thousands of coconuts but can’t make that hard tool?

@mariahelenaladeia3617 2 жыл бұрын

👏👏👏

@tuanrishansabreen2795 Жыл бұрын

WhatsApp number?

@gunapalak.h.g.6050 2 жыл бұрын

Dear friend, why not press down word instead up word, it will be very easy to handle, thanks Guna E/Eng.

@allaroundchannel9947 Жыл бұрын

Wooow nice sir watching sir try my video for you

@smsaviraja1972 6 ай бұрын

This Material Price....?

@krishath7085 Жыл бұрын

The real test is a dry one..

@jashwanthrockzz7624 Жыл бұрын

Where I can buy this.... 📌

@saniruniwanjana9666 4 жыл бұрын

👍❤️

@issueradar8408 Жыл бұрын

Where can i buy one?

@mallikaraniprabakarandhara3493 3 жыл бұрын

Free ride means in red colour buses also with in city limits

@BronzeFilter 3 жыл бұрын

Would have been useful to put some sizes

@anandasene Жыл бұрын

Mata ekak hadala denna puluwanda? Mila keeyada kiyala danwanna. Mata ona bima haikarala thiyanna..

@hellofriends7926 Жыл бұрын

I want to buy this machine .so, how to get it ?

@8e45yashdandane7 4 жыл бұрын

Sir please tell us how to make hand grip

@litasmith6768 3 жыл бұрын

can u tell me the types of machine used in this video? its for a project

@creantho 3 жыл бұрын

It’s a hand operated coconut peeler

@tuanrishansabreen2795 Жыл бұрын

@@creantho WhatsApp number / address?

@muripathma1217 2 жыл бұрын

Macine aka apata ganna puluwanda?

@kavinkumara8144 3 жыл бұрын

Uinga paiyan ah engrage panrega athukey 🙏🏻🙏🏻🙏🏻

@TAMILANDARBARFAM5655 4 жыл бұрын

Oyata,jomatha

@harshadwairagar4936 2 жыл бұрын

I need to buy this in machlipatnam Andra pradesh plz

@muripathma1217 2 жыл бұрын

Me koheda? Sale price kohomads?

@vandananagole8742 3 жыл бұрын

Can u deliver one to US

@samanthiniesiriwardena5825 2 жыл бұрын

How can I buy this matchin.is it available in the market.

@maxjagadees 3 жыл бұрын

Hi bro i am saw good i am india can you supply coconut order based in export

@francinewade3962 4 жыл бұрын

Where do they sell those things mien a need one

@MRB123-x 3 жыл бұрын

Can you delivery Tamilnadu this machine

@creantho 3 жыл бұрын

Hi, This is just a Demonstration of how to build husking tool. pls get this done by a welding shop near by

@MRB123-x 3 жыл бұрын

@@creantho k sir

@kumarguni8641 3 жыл бұрын

Bro ekkada dhoruku thumdhi machine naku okati kavali

@brawl1488 3 жыл бұрын

even samoan can open without tool

@thavyvy8328 4 жыл бұрын

Can I buy this ?

@pyaripihu17 2 жыл бұрын

I want to buy this machine

@sharaths4 3 жыл бұрын

I need to buy this ...how can I get ?

@himariarkinshana2591 4 жыл бұрын

can we buy this one please

@layonijohn8883 3 жыл бұрын

Come to Kerala. You'll get it in every local shops.

@sudeerkumarpusala9820 2 жыл бұрын

Cost antha. Bhayya

@jcdan8502 4 жыл бұрын

Hi sir.. ur video is very helpful... can u pls share the materials that i need to make one sir? The measurements also sir? Ty for replying..

@creantho 4 жыл бұрын

Coconut Husk Remover , Husk Peeler - with Measurements

@dananjayawettewa4435 4 жыл бұрын

Matath ekak Oni...

@arsharsh9935 3 жыл бұрын

Where I can buy broo.

@sudeerkumarpusala9820 2 жыл бұрын

Bhayya. How much. Cost. Tell me. Bhayya

@creantho 2 жыл бұрын

you can show this videos to a Welding shop and ask them to do a one for u bro..

@dr.rekhasanjib8001 3 жыл бұрын

Where do I get this machine

@priteshchogale5371 3 жыл бұрын

Can you provide Material details?

@kvenipriya2196 3 жыл бұрын

Waya to buy

@kasthurisampath4761 3 жыл бұрын

What are price

@akilmurugesan3023 4 жыл бұрын

Don't use cut off wheel for grinding brother

@creantho 4 жыл бұрын

Thanks Brother

@talasilabhuvankumar7594 3 жыл бұрын

Price how mouch

@nanoelectricals7794 4 жыл бұрын

uba patta ban good luck api digatama innawa onna sub kala apiwath sub karanna

@royperera1141 2 жыл бұрын

Please let me know whether you sell your product and the price. also send me your address. Thank you.

@wzx551 3 жыл бұрын

මිනුම් ටිකත් තිබ්බා නම් හොදයි

@sushilpawar4293 Жыл бұрын

किंमत किती आहे