MAKE A PİPE - Simple Wood Pipe - How To Make A Wood Pipe

Рет қаралды 11,630

6 ай бұрын

In this video, I reveal a design that could not be implemented in my previous project.
It is possible to make a beautiful pipe using very simple materials.
The materials I needed were a fresh walnut branch and a previously dried piece of beech tree branch, that's all.
I hope you enjoy watching
If you liked this video, you can also watch my other pipe making video.
• MAKE A SMOKING PIPE - ...
#pipe #woodpipe #smokingpipes #diy #diycrafts #woodworking #woodcraft #howmake #smokingvideo #smoking

Пікірлер: 62

@christianj.galoni8437 2 ай бұрын

Bravo. 👏🏿👌🏿👏🏿👌🏿

@BROTHER_WOOD08 2 ай бұрын

thank you for watching

@user-fn6pi7by4u 3 ай бұрын

Cool...😊😊😊

@BROTHER_WOOD08 3 ай бұрын

thank you

@cherokeesfinestindian 5 ай бұрын

It's amazing what you can make with only a couple of tools.

@BROTHER_WOOD08 5 ай бұрын

Thank you very much. I'm glad you liked it.

@aytunsezer9383 5 ай бұрын

Harıka olmuş murat bey

@BROTHER_WOOD08 5 ай бұрын

Teşekkürler Aytun abi 😊

@leisongivangomo4478 5 ай бұрын

Beautiful!

@BROTHER_WOOD08 5 ай бұрын

♥

@sinanszr 6 ай бұрын

muhteşem olmuş emeğinize sağlık

@BROTHER_WOOD08 6 ай бұрын

Sağolasın Sinan 😊

@volkanyazici3604 6 ай бұрын

yine çok güzel bir iş çıkmış ortaya

@BROTHER_WOOD08 6 ай бұрын

Sağolasın Volkan abi 😊

@user-cj5yt5ik1q 5 ай бұрын

Здравствуйте!👍👍👍

@BROTHER_WOOD08 5 ай бұрын

Спасибо!

@damirkukovec9263 3 ай бұрын

Coolll❤❤❤

@BROTHER_WOOD08 3 ай бұрын

Thank You!

@old_timey_prospector 19 күн бұрын

I'm curious about how long you let your stem blank dry before you felt it was ready. It turned out beautifully.

@BROTHER_WOOD08 18 күн бұрын

thanks for watching. I did the drying process with a heater. I waited a day for this. Naturally, it takes about a week. If you peel off the bark of the branch, it can dry in a shorter time.

@old_timey_prospector 18 күн бұрын

@@BROTHER_WOOD08 I actually didn't expect it to be such a short wait, that's reassuring. Did you notice any loosening at the joining point after a while, or has it held up well over time?

@sergiolovato7468 6 ай бұрын

Bom dia ficou top joia 💎

@BROTHER_WOOD08 6 ай бұрын

Obrigado pelo seu comentário.💎

@alanyafotografatolyesi 6 ай бұрын

👌👌👌👌

@BROTHER_WOOD08 6 ай бұрын

😊

@lemhanback9595 5 ай бұрын

Love the guitar music in the background. Do you sell these to collectors or to pipe smokers as well?

@BROTHER_WOOD08 5 ай бұрын

Thanks for the comment. unfortunately they are not for sale.

@user-mc5wc2uc2n 6 ай бұрын

🔥👍

@BROTHER_WOOD08 6 ай бұрын

😊

@magnushedman1076 5 ай бұрын

inspiring works thank you! I will go out in the forest in the spring here in sweden,witch tree species did you work with in this video?

@BROTHER_WOOD08 5 ай бұрын

Thanks for the comment. Actually, I don't know the correct name of the tree I used in this video. It may be a type of witch tree. There are countless trees in nature that can be used for this purpose. I am also thinking of trying different trees for newer designs in the future.

@robertcornelius3514 5 ай бұрын

Zorro of pipe makers!

@BROTHER_WOOD08 5 ай бұрын

Thank you very much😊

@LairdCombanite 5 ай бұрын

What kinds of tree branches have these natural sort of hollows through them for the stem? I've unexpectedly become very interested in this and was curious for insight

@BROTHER_WOOD08 5 ай бұрын

I used fresh walnut tree branches. But this gap is also present in the dogwood tree. I think there is this gap in other trees too. There are wider gaps, especially in fresh branches.

@josephponder195 2 ай бұрын

@@BROTHER_WOOD08awesome I doesn't know that! I've been trying to imitate your technique and it's much harder than it looks. I've messed up 3, now on to try my 4th. I keep getting held up with the drilling

@danfrancis6795 4 ай бұрын

How do you put the hole in the ling neck piece?

@BROTHER_WOOD08 4 ай бұрын

Thank you for the comment. The hole in the stem is caused by the walnut tree I used. I just cleaned this hole with a wooden toothpick and that's all.

@labelplume841 5 ай бұрын

Hello !! Great work !! The stick has already a hole inside ??😊

@BROTHER_WOOD08 5 ай бұрын

Thanks for the comment. The hole in the stems is an inherent feature of the branch I used. I just cleaned this hole with a wooden toothpick and that's all.

@labelplume841 5 ай бұрын

@BROTHER_WOOD08 ooooooh okay, would you share to me what type of wood it is ??

@BROTHER_WOOD08 5 ай бұрын

@@labelplume841 I used walnut tree branches. The dogwood tree also has the same feature. Other trees may also have the same structure. But don't worry if you can't find any trees. You can pre-drill and shape a fresh branch. will give the same result.

@MarcoJena83 5 ай бұрын

Hi, congratulations on the nice work!! I really like your creation! I wanted to ask you a question. How did you make the hole in the suction pipe? It's long and curved and I can't tell from the video. Do you work it when folded or when it is straight? Thank you for this nice craft video.

@BROTHER_WOOD08 5 ай бұрын

Thank you for your kind comment. The holes in the suction pipe are caused by the structure of the tree I used. There is a membranous structure inside the branch. I can shape it first and then easily open an airway with the help of a wooden skewer. A fresh walnut tree branch is very suitable for this job. It does not require any further action. There are not only walnut trees but also other tree branches with similar features.

@MarcoJena83 5 ай бұрын

@@BROTHER_WOOD08 Magnificent!! I didn't know they could be punctured so easily!! I was already trying to figure out how to make through holes!! I ask you one last thing, do you leave them in an arched fold for a long time before working them to make the joint? Thank you for answering me! Hope to see more of your videos soon. You have good manual skills and seeing what you make and how you make it makes you want to try!! Thanks again!

@BROTHER_WOOD08 5 ай бұрын

@@MarcoJena83 Thank you... Yes, I wait for the piece to set up and the shape to become permanent before putting the pieces together. If you don't want to wait, you can dry it in front of an electric heater. Then all I have to do is carve the pieces to fit together. If you want, you can apply beeswax between the pieces to stop air passage. so they can be more robust.

@microstrader 5 ай бұрын

WOW.. really... you don't drill the hole?? @@BROTHER_WOOD08

@BROTHER_WOOD08 5 ай бұрын

@@microstrader Yes, there is no need for this. However, you can achieve the same result if you pre-drill and shape a tree that is not yet dry.

@oxtoby1 5 ай бұрын

Instead of walnut is there anything else that can be used I'm in the UK and walnut trees aren't readily available here thanks for a great video

@BROTHER_WOOD08 5 ай бұрын

Thanks for the comment. Of course, there are other trees you can use. I recently discovered that the dogwood tree has the same feature. There must be other trees. There is enough space, especially in newly grown branches. However, if you cannot find it, you can pre-drill and shape a fresh branch. This is also a way to try.

@oxtoby1 5 ай бұрын

Thank you very much I will have an experiment and see what I can come up with

@FelixTheAnimator 5 ай бұрын

In the USA there is a very lightwood tree called Catalpa. Very easy to carve, almost like balsa, & it's branches, even it's trunk, are always hollow at the pith. Grows very fast, dunno if it's good to smoke through though.

@spazzypotato8325 5 ай бұрын

@@oxtoby1briar wood is a classic wood that was widely used in the UK since its super easy to get and its a very hard wood.

@milkyhuman5644 5 ай бұрын

@@BROTHER_WOOD08instead of pre drilling you can also use red hot wire or bike spoke to burn through green branch core. This way you can even work with curved pieces as the wire will guide itself through the soft part of the wood.

@mikemike775 5 ай бұрын

are your pipes for sale?

@BROTHER_WOOD08 5 ай бұрын

Thanks for your comment. But unfortunately they are not for sale. This is something I do on KZfaq to give people new ideas.

@kurtludwick3291 5 ай бұрын

You can take your mask off there's nobody around

@BROTHER_WOOD08 5 ай бұрын

I take it off when the camera turns off. I have a mask because I feel more comfortable this way. It is also very useful against dust.

@spazzypotato8325 5 ай бұрын

You can sign out of KZfaq your comments make you look like a dip$hi7 mr. Kurt ludwick. Also it's kinda dumb that your user name is your actual name what are you like 90 smh

@One61803 Ай бұрын

I was going to say it must help a lot for dust, don't forget goggles it glasses.

@old_timey_prospector 19 күн бұрын

There were people around your mom last night. She had to wipe that mask off with a towel.