Nice job! Couple of tips. If you're cutting multiple pieces that are the same length, clamp a stop block to your fence the distance from the blade that you wish the piece to be. Then cut as many as you want by running the board up to the block. Exact same length each time quickly. But most important, make you a push stick for pushing the work thru the saw blade. Saves the fingers lol! Good job tho!!

I am going to start teaching a basic woodworking class to a few homeschooled boys 10 to 14 yrs old. This is a project we will consider doing for Christmas presents for their moms. Thanks.

Young man, I'm impressed. You've already learned one of, if not the, most important things in woodworking, and life in general. "If it's worth doing, it's worth doing right". Keep it up. And never pass up an opportunity to learn and try something new.

It's great to see a young entrepreneur doing something that makes him happy.

59K views! That is so amazing! Such a fabulous job, Jacob! You put your heart into all you do. So proud of you!

Have you tried turning the feet by 90° so that you have the cut faces on the ends and the factory planed faces on the bottom? That way it doesn't matter if you're 1mm or 1/16th out with your cutting as the difference will be on the vertical plane. It would also reduce the possibility of the brads splitting the feet and have the consistency of having end grain showing on the ends of the project.

I'm trying to make it at woodworking after a few years. It's small and simple but it sounds like it sells, and therefore it can fund more woodworking! Great job man, keep it up and be proud of each step.

Love this, thank you for the inspiration x

Nice work young man. Started woodworking in May and have already made some money myself as well. Stay on track you will do well in life!

Well done young man, you will have a great future. Just a suggestion, when you have spread your wood glue and then apply the foot it will help if you press down on the foot and rub it left and right (called rub jointing) you will find that the joint will become very tight and strong you will have removed all of the air and the joint will be twice as strong instantly (if you clamp down hard on most PVA glues and you squeeze out too much of the glue it can weaken a joint) however with a small job like this strength is not an issue. P.S as others have said Safety/Safety I got to 75 and have only lost the tips of a finger and a thumb many years ago, Love my workshop, good luck.

Great job!

i started out like you 45 years ago and have earned a good living as a cabinetmaker. Keep it up, youll be amazed how much you will learn in a lifetime and it is so rewarding. Be careful running those ends throough the tablesaw, its dangerous. Theres always a better way. best of luck to you.

Thanks for sharing!!! It was worth watching all the way to the end!!!

Great design, we don't have to make complicated products to be successful in woodworking. Keep up the good work, you're off to a great start.

Super easy and simple love it.

Remember you're an artist, and your medium is wood. You don't make mistakes on your pieces, you add features. Can't criticize art.

This outstanding young mn is going to be very successful! Way to Go!!

Well done young man. You should be very proud. Your technique and ethics speak volumes. I look forward to seeing what else you come up with

Excellent work young man. It doesnt have to be complicated for it to have value. Nice tidy creation! Well done mate

Thank you for sharing

Great job 👏. Thanks for sharing ❤

Good job and project thx for sharing Keep building

Thanks for the video. A couple of pointers about the sanding. You could save time and make it much easier if you sanded the complete board before cutting and assembly. Also, one should never tilt an orbital sander. The sander should always stay flat to the surface to prevent any gauging.

Love the background music.

Well done young man! I will teach my grandson and we can make some for gifts and some to sell. Looking forward to seeing more of your projects.

Enjoyed the vid. Got a sub and a like, good luck with all your endeavors.

Very nicely done, and a very inspiring simple build! :)

Great job buddy!!

Great video! I'm a small time woodworker so small projects like this are what I like to do. Living in an apartment makes it hard to have some tools. But this one I think I can manage. Plant stands might be something you could make as well! Keep up the good work! I'm subbed and ready for the next one

Nice, simple and easy to make, looks good in the staging you did, Subscribed.

Awesome 👍

When I was your age, I was in wood shop at school. I wanted to make a project, but the only wood I had was some old cedar posts. I stripped the bark off the posts and cut the ends off of them on a band saw, to make them flat. I tried to turn them on the laith, but the wood was too soft. I cut another piece off about 4 inches thick and thought about how the cedar smelled. Eventually I drilled holes in the piece a little bigger than a pencil. Making a pencil holder. Lacquered it and gave it to my dad. He took it to his office and his friends saw it and offered to buy one. My dad told me, and I made as many as I could and sold them for $2.00 a piece. That was back in the early 70's. I did not patent the idea. I have seen the same design sold at convenience stores and flea markets. I ended up making about $250.00 before I ran out of cedar posts. Good luck to you.

Well done nice project sir..

I would suggest skim coating the leg base end grain with glue

Creative!!

Great project. I am hoping to sell a few wood crates for fall. Maybe a few trees for Christmas. Starting out small is the way to go.

If the stands are going to be in a wet environment, using Stainless steel brads would be a nice touch.

Very nice job. And your video work is pretty darn good, too. Keep up the good work. And, just because no one mentioned it, it's called a chamfer bit (for the 45° angle). You are doing a great job. Nice to see a young guy with such great ambition.

I’m laughing out loud watching you clean the glue off your finger by running it under the counter. I usually wipe it on my pants, lol.

Hey Little Brother. I've had good success pre drilling, with a tiny drill bit, a pilot hole when brad-nailing into-the-grain. I use a 1.5/2.0 mm bit in M12 drill which an incredibly compact package.

Nice job. I like to use stop blocks when it really matters to accurate repetitive cuts as with the feet of the stand. I'm terribly inconsistent otherwise.

Great video, thanks for sharing !!! Do you seal the stain after ?

Super easy... 🙂

Very good young man. But, that crosscut chamfer is so dangerous. I'm afraid you will eventually have a horrible accident, you need to use the miter gauge for that. Keeping it simple is always a winner. Thank you for this, I'm gonna try it.

Great job! A nice little item. I think the staging of your photos must help as well?

Thank for the video, what model brad nailer are you using? Thank you

Good job taking action! I have a video creator tip for you. Don't look into the camera monitor when you're recording, look at the lens itself. It will give a more personal connection with your viewers. Keep up the great work.

I like how you wiped your finger off on the bottom of the table! I do that too!

Young man great job, trying to teach yourself and make money, but I do want to give you a piece of advice. I have been a master carpenter cabinet maker, woodworker for 42 years when you're doing cross cuts on a table saw cutting against the grain you should alwayswork with a sled or with a guard you should never be cutting against the fence. There's a good chance it could pinch and kick back on you and you can get majorly hurt which we don't want that great job.

Well done! Always looking for simple projects to batch out. Looks like you grabbed lots of views on this video when compared to your subscriber count. I may batch this one out on my channel and give you credit. Keep on keepin' on!

Smart kid

Hi Jacob a tip for you if your knocking a nail in BY Hand if your afraid the wood will split turn your nail pointing upwards and bang the tip of the nail its called killing the nail and it won't split the wood, ( mind your fingers) 😂

Thanks for sharing! And thank you SO MUCH for not including the full/LOUD audio of all your cuts. 😅 *that is never necessary. 😅

Great design. What do you call them?

Thank you for sharing. I could take that one step further by laser engraving a saying or graphic. :)

My wife calls those a riser box. They are good for decorating.

Hi Jacob its pete from wales uk so great to see you enjoying woodworking as i told you in my youth all done by hand a garage roof was easy but a house foof WOW!!!!!!! 6x2 timbers carried up a ladder 30ft then cut your pattern for the rest of timbers, first ridge cut then birdmouth or bottom cut then 8x2 hip raters , when roof was finished and covered floor joists 8x2 were cut and fixed , then to make stairs ( i was 16yrs old then) by hand the timber was piranha pine ,i will tell you how on next comment stay sharp mate.

cool

Just a tip to save time, Don't sand until the product is completely assembled. (invest in a detail sander) Or, sand the entire board before cutting, and then just touch up the cuts after. Sanding each individual piece after cutting is less efficient, takes more time, ...and time cuts into profit. nice little gig though, congrats.

I would recommend making a tablesaw sled for cutting those small feet. It will be a lot safer for you and its great for cutting all kinds of stuff

HaHaHa.. He wiped the glue off his finger under the bench like he's getting rid of a booger. Made me laugh and took me back. Nice video kiddo, thanks!

How long have you been making these? I made my first 2 today with some scrap I had. I painted one white and another white as well but I used my torch and burnt it first then painted.

what do you call that gadget ?? great job

I want to try this for my first project to sell. What do you call it? How do you list it, like "soap stand" ? Thanks! 😊

Since you have a table saw I’d take the time to make a sled so your legs are always the same size every time. Just a thought.

What measurement do you have on your tablesaw to add the bevel? I attempted to add the bevel, but it was too close to the blade, making the bevel too deep

Is that a black ebony stain ware do I get it I accidentally got the black ebony poly n it was thick n sucked

I also use 2or 3 little dots super-glue along with wood glue, and the super glue acts as a clamp, while the wood glue. So clamp a moment and then move on.

Ok, great job. Can someone tell me what's it called?

Looking to get started in Woodworking, but everything is so expensive to start. Any suggestions to help reduce the start up cost?

How about mitering the pieces and splines to secure them?

Might be better using a table saw sledge when cutting side ways might loose your arm if that work slips.

Why do you only have 25 subs that’s sad for the quality of the vids

What kind of brad nailer is that?

what are they called?

what is it??

I have been trying to sell these and haven’t even gotten a bite

Do you ship on Facebook?

What the heck do you call this thing ? TY

Good on you, kid!

Gonna get hurt crosscutting against your fence. Just a matter of time.

Yes! I was waiting for this exact project! It'll definitely very helpful while I continue to analyze Woody Hyezmar's projects which you get in his Woodworking Bible by go’ogling it and hoping it’s still available.

Price dropping just barstardises the whole woodworking industry. It undervalues and reinforces your skill level, product quality (or lack of) Great Craftsman Woodworkers sell their products by illustrating their quality construction methods, features and product value, which far outweighs customers perspective towards a cheaper knock-offs in price. Price dropping is commonly used by younger, amateur and unskilled homie woodies that perspective themselves as making cheap product with no skills. Which do you wanna be recognized for? Buyers base price at number 7/8 out of 10... #1 being of little value reflected in the price. Failing to manufacturer quality products degrades the whole woodworking industry.

this has got to be a joke right? boy he put one over on us LOL nice try

Champher