My Project Design Plans jonpeters.com/ Shop my Artwork jonpeters.com/my-artwork/

The bike was easy to install and was a perfect give for my aunt. She really loves taking it out around the neighborhood.

I was very nervous putting my brand new beach cruiser on this rack. kzfaq.infoUgkxG6JIgwJhur8_Rg8UeQ3EmePzi_wSncL8 But after reading many reviews I decided to get this one and take a chance. When arrived it was very simple to adjust and put together. I also added spike tape over the metal hooks before securing and tightening the straps, and no scratches. I also purchased the top bar made by the same company so that my cruiser sits straight on the rack without having to turn upside down. Extra bungee cords are used to secure the front wheel from flapping and even piece of mind knowing your bike is secure. Definitely recommend...

Nice one. How about a string attached to the pin so it doesnt lie around but can hang on to the side of the rack?

Super simple, nothing to go wrong, really great idea well executed.

An elegant solution for storage. Thank You!

Well done Jon! Easy and very functional! 👍👍

Love the simplicity of it. Thanks for a great clip.

Love it, great diy option that can be customized for multiple bikes

Great idea!!! It takes up very little space, does a good job of holding the bike and is simple to build.......thanks for sharing!

Very well thought out,yet simple so that anyone can make.Thanks

Definitely borrowing this idea! Much better option than the $80 hanger I was looking at. Might also attach the dowel rod to the rack with a string so it can hang when not in use.

Super clever design. I think I would position it by placing it on the tire and then do a wheelie to the wall with it still on the tire. I might cut the 90 degree corners off too, but I think I will use this in the bike shed. Thanks for sharing this!

That is simply genius. Nice project, Jon!

Brilliant. So simple. Thanks

SIMPLE AND EFFECTIVE! NICE ONE JON!

Very comprehensive, Ive viewed many bike stand builds...This I am gonna duplicate as it is simple - clear - precise and robust... Appreciated post Thnx Wilson

That's just brilliant, Jon! Really fantastic work! 😃 Stay safe there with your family! 🖖😊

Nice !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ima try and make this work for my regular bike! Thanks Jon!!!!!!!

Liked everything about it!

Pretty smart and simple idea

Deflate the trolls before they puff up. Love it!

Love this, so simple, I’m off down the shed to make a couple, thanks for sharing ❤

I have to admit I just came in from shop and was thinking about doing something with one of my EBikes, and I got your notification, what perfect timing! LoL This looks super easy, thanks, this will be perfect. Doing it on a 4”, thanks again!

Very nice - simple design and it works.

Brilliant idea

Excellent Craftsman.

I like this simple design a lot, Jon. The "No lifting" aspect is good for kids too! Best, Andrew

Too easy, too smart, well done!

So timely I need this x3

Awesome!

Brilliant 🙌

Best one yet and it is a DIY, brilliant. 🥇 I'm going to make it thank you Jon Made it today works great, I did make it a bit of a tight grip on the front wheel but just loosened the screws a little now fine. thanks again.

Made it today a little different. I screwed "compartements" on a longer plank, so i can store 3 bikes. The extra secure with a dowel is a genius idea. Thanks.

Excellent ! Now i can recycling my old drumsticks, thanks for sharing this 🙂

I'm always struggling to find an easy way to store my pedal assist bike. What a great idea, Jon - thanks!

Nice and simple build...🤘🤘🤘

Pretty cool, low-tech solution~!

super idea thanks for showing :)

iv learned a lot from you. thank you Mr pro.

so practical. love your content. miss the painting vids sometimes too.

I have an eBike and love this design. Will try and build something like this

Good job.

NICE!!

Great design 👍

Very cool

makasih ilmunya pakle 🙏

Brilliant

Beautiful

Simple and elegant. Now I just need to get my ebike.

Nice 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧

The downside of this type of bike rack is that if you have hydraulic brakes, the caliper is above the lever master cylinder. This can present problems.

Love this idea ~ wonder if you’d had thought about making and bringing these to the retail market ?( for 4 inch tire e-bikes ) I could see these made out of acrylic too !

Very nice. I was just looking for a practical wall mount when I came across your video. Since I can't work with wood, I print the whole thing with my 3D printer. Thanks for the cool idea. Greets from Germany.

Hi Jon..love your videos...🙂🙂

Since you store it in the shop - do you notice any dust buildup on the gears/chain? Never thought about whether chain oil and saw dust gums up over time

Geniale👍

Изобрёл велосипед! Хотя все уже давно придумано и есть такие крепления. Но за любовь к велосипед у поставлю лайк

Why not jus drill a bigger hole for dowel??

Nice bike

Great minimal rack.

Awesome idea! Does the bottom tire roll backwards? There seems to be no back tire support keeping it from moving.

Very neat and detailed job, marvellous tools but personally wouldn't like to push my Maxxis tyre each time in the tight wood, wonder if it will start to damage the rubber sides of the tyre after a while...?

That’s a nice little MTB corner you’ve built there. Is that a siding you trimmed out?

Thank you for sharing! What T blade do you have on your miter saw?

That dowel is begging for a custom handle to be turned!

Hello John ...greetings from Peru 👋👋👋... It is very important to take care of our bikes, even if they cost US$10K each. After doing a research to see what were the best options, let me tell you that your solution to hang your bike up was the simplest one I saw.... At the beginning I was closed to buy a Steadyrack Bike and expend US$180 for a pair, but after watching your video I made the same rack as yours, but I added a couple of hinges in the backside which connects the rack on to the wall. In this way I can fold my bikes, but only in way way. Thanks for sharing your video. I have just one question. I want to buy the same drill bit that you are using to do your guiding holes. Where did you get it??? I will appreciate your tip. ... Have a nice and save ride ...

Nice setup, do you think if the holder was positioned at 45deg angle you would be able to fit multiple bikes within a smaller space ?

Could this work horizontally in a van ?

Is okay but some wheels have aluminium spokes that are fragile and can snap as a result of putting all the weight on it.

Excellent project. But I have to ask: Why are there individual shelves on the adjacent back wall for single shoes?

Could I get a recommendation on placing these bike rack on brick walls?

Will the friction fit damage the tire? Does it matter that the weight seems to be on the bottom tire?

Nice idea. I would move the dowel closer to the rim just to minimize the movement rearward if the air pressure is low or if it drops.

Jon was that the same blade on your miter saw cutting the plywood and doweling? And if so how many tooth is it? Also don't think I didn't see the 2 shelves you made for each one of your sneakers 😆

What is this bike?)

Hmm.. is that a remote to turn off the saw ? Is it a 220 controller ? I hate reaching down to operate the one on my saw. And the bike rack's neat too.

Works good for one bike. For a family set of bikes, it's no good. Can't get in there to access the dowel. I have yet to figure out an elegant solution for a racing family of 10+ bikes. I'm sure you could figure it out!

Great simple build Jon! Just curious, when the tire is flat, how do you get the bike out of the rack? If you pull the dowel out it will fall back I think? Will it become a two man job then? (especially with this bike being so heavy?)

thanks for the great idea

Wait till the tire deflates!

Nice. Thanks from a life long cyclist. Not complaining about no ads, but is your channel demonetized?

Wheel great video. I never get Tired of your content. Please don't tread all over me for these jokes.

I can just hear the cracking sound of the wood where it is screwed on when walking past and knocking my bike a bit. I know because i knock my bike alot, but my wall rack holds the tire loosely. I do like this design though, but it doesn't appear to be "knock into bike proof".

That’s what she said…..

Zieht aber auf die Speichen! 👀😬

To make $10 bike rack, you need to buy $1000 tools :) but idea is good

Nice idea. I was just wondering. I was once told that storing a bike (with disc brakes) like that could cause problems with the brakes. Because of the way it's held vertically, you can get air bubbles in the oil of the hydraulic brakes causing them to fail. Please somebody correct me if I'm wrong because this solution would help me and my 5 bikes 😜

Come on, that's atleast 8in off the wall...

I think I'll just go buy one for $15

Y el líquido de frenos a tomar por saco, menuda globerada

So I just spent £11000 on all those tools the wife ain’t pleased I tried to tell her but the bikes not in the way anymore but she’s not having it?!

Never hang your bike for long term storage . Or even a couple days. Not good for the fluids. Simply store it standing on its tires as if you were gonna ride it. That’s the way it is designed. I like your idea and not bashing it. But from experience hanging high end mountain bikes I have had problems. Maybe you won’t .!

Hahaha

First!

Is this your cheapest project ever? That’s gotta be three dollars worth of materials. One question… Why would people be worried the bike would fall if … it’s trapped by a dowel? Doesn’t make any sense to me. Oh well.

Hanging bikes like that is bad for the bike.

It's bad for the battery hanging like that they need to remain level