MAKE ARDUINO RGB REV LIGHTS w SIMHUB

Рет қаралды 467,824

6 жыл бұрын

DIY RGB rev lights for your sim racing simulator using SIMHUB and a Arduino. Great addition to your dash.
PARTS
USB ebay.us/tBvWhf
LEDS ebay.us/zIzhds
ARDUINO bit.ly/307UzUz
PERSPEX ebay.us/kMEEi0
SCREWS eBay ebay.to/2NbOL74
NUTS eBay ebay.to/2JOudgw
Solder: goo.gl/Ni6n4P
Wire eBay 22awg bit.ly/3oNsA9J
Soldering iron I use ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated
3D files same as the video by AMSTUDIO bit.ly/2poyuT5
*For printing parts you can use a local print service like 3dhubs
My SIM Setup
Fanatec CSW 2.5 Wheel base
Fanatec Universal Hub w OMP wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Table clamps
Get Fanatec here:
www.fanatec.com/?F...
Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this please share the video with them.
Check here for other SIM Mods and DIY projects.
/ @amstudioprojects
| SIM HUB | Credit Developer
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Пікірлер: 442

@Crazy_ATV_rider 4 жыл бұрын

Dude i’m so excited that i found your channel! By far the best DIY channel ever💪

@Robspeed69 5 жыл бұрын

Hey Mr. AMSTUDIO, I ordered the parts thru your list, soldered it together ..... and it works like a dream. Thank you very much for the good work! Rob

@EMS9729 5 жыл бұрын

How much did it cost total?

@df3624 4 жыл бұрын

Robby Schafhauser Also curious

@matk22 3 жыл бұрын

@@EMS9729 could always press the link and use a calculator?

@EMS9729 3 жыл бұрын

@@matk22 yeah but why not ask, all links are most different sites.

@underrated-simracer 3 жыл бұрын

@@EMS9729 just bought it, €6,34 on Banggood since I already have some cables and usb cable. Do you want a link?

@Alysavos-rd4tp 6 жыл бұрын

your rig is every racing gamers paradise...

@manuelpuerto2481 6 жыл бұрын

it´s a pleasure see your videos. Best material DIY simracing on KZfaq! I'm making this revs lights now!

@Zaurkin 6 жыл бұрын

Great video!!!! Well done ! No one even comes close on KZfaq on DIY SIM!!! Love it !!!

@johnh3337 6 жыл бұрын

Man i need to get me a 3d printer, nice job, added to my build list

@Tom-kj6vn Жыл бұрын

I built mine out of wood

@ericMT 4 жыл бұрын

For anyone in the US, Perspex is called Plexiglass (1/8" grey tinted plexiglass). If you had trouble finding it, that may help.

@yorick9053 5 жыл бұрын

I have seen sooo many cool videos of you keep up the good work man!!!!

@vectorr6651 5 жыл бұрын

Man I would buy all of your items :) Just built my own rig and got my first g29. Keep up the great work.

@perez838 6 жыл бұрын

Ordering the parts right now, thank you

@TheThumbsUpChannel 5 жыл бұрын

Dude this is sick. I’m just going to build one as soon as the parts get to my house

@DuanDao 6 жыл бұрын

I love your channel, great DIY ideas for my sim rig

@andycnx7177 2 жыл бұрын

Just found your channel. Awesome videos. Looking forward to making some of these projects. Oh, and on the first corner of Brands Hatch, try breaking a straight breaking line down the middle of the straight and turn in for a slightly later apex just before you run out of road, then go full throttle to exit. It'll feel like you're about to come off into the gravel, but that dip at the bottom of the hill will give you a mass of traction just in time to keep you on the track. Feels great when you get it right.

@megustachuletas3956 5 жыл бұрын

You always make the nicest toys!

@ryanbeck4947 2 жыл бұрын

Ok… my hope is restored for searching up super specific videos… thank youuuuu

@Niek__o 6 жыл бұрын

this stuff is lit, i might consider making this if i really need this but im getting a new steering wheel first

@EMS9729 6 жыл бұрын

Tristan Boumans really?

@nurburgringbiker 6 жыл бұрын

A nano V3 from china is under 2 euro, the same goes for the TM1638 display. Then you need some plexiglas, bolts, nuts and something to wrap the front of the display. I did a similar build (used a cheaper tm1368 with only red LED's)

@EMS9729 6 жыл бұрын

Tim aaa Okay thnx do u have a video about it?

@MrFrosty888 4 жыл бұрын

Love to be able to buy the housing n Perspex cut out. What you made is awesome getting thing together and can’t wait to have it up n running. Cheers bro subbed

@TMCHL 6 жыл бұрын

Nice design mate Well done ! :) thanks for sharing

@iracingiflag 5 жыл бұрын

Hats off to your solder guy in this video!! Makes it look easy.. maybe I am just old and can't solder with a crap.. I am going on my 2nd try now because I keep screwing it up.

@PuRe_AdDicT 6 жыл бұрын

Another great video!! Keep spreading the SimHub good news ^_^

@amstudioprojects 6 жыл бұрын

SimHub is an awesome piece of software and keeps getting better!

@DuanDao 6 жыл бұрын

thanks again for this tutorial, even though the simhub software is a lot different now with your video i was able to set mine up. Just wished i had a 3d printer to house the LED's

@amstudioprojects 6 жыл бұрын

Use a local print service like 3dhubs

@whatupyo7260 6 жыл бұрын

As always super vid and very clever

@simracinggaming5102 6 жыл бұрын

Great DIY amstudio :)

@afterlife3515 6 жыл бұрын

Hell yea! Thanks for this guide.

@WazzupTN 6 жыл бұрын

Nice Job Bro Keep up The Good Work

@juniorlima7172 5 жыл бұрын

The beste of category!

@evilhamsterzz 6 жыл бұрын

Surely this is the final step for you to make an F1 styled rim with the screen, the rev leds, buttons and paddles.

@AlexandreMonteiroSilva 6 жыл бұрын

Great Job! Thanks again!

@MrChrisCanna 5 жыл бұрын

Love your channel! You've inspired me to make my own F1 style steering wheel for my sim rig. I'm planning on using these shift lights as well as a 7 segment display (8 digits, compatible with simhub) and also several push buttons. Ideally I'll power it using the 6 pin DIN plug from the original wheel, and use bluetooth to communicate with my PC. My question is, would I be able to run all these functions simultaneously through simhub? Thanks.

@souk-tv 6 жыл бұрын

Your mods are so awesome..

@Yunseo_J 6 жыл бұрын

Cool thumbnail!

@stefanknauer7180 6 жыл бұрын

Hey man, awesome videos! i got a question though, do you think it would be possible to make the 6 extra lights (3 left and 3 right of the rev lights) like they have on F1, Indy and other race cars to display flags, pit, drs etc.

@gorkii5234 6 жыл бұрын

Thank you so much dude. You are awesome :)

@d.o.m.p.e 6 жыл бұрын

Yeah new video!

@moddok 6 жыл бұрын

I LOVE YOU! thank you so much!

@Mauricewertz 5 жыл бұрын

You're creations are inspiring, keep up the good work ! Question: is it possible to share the .leds file to import in SIMHUB?

@Aircraftlol 5 жыл бұрын

Do you have it?

@Str33tfalcon 6 жыл бұрын

Love it!!!

@slap_A_flamingo 3 жыл бұрын

Your videos are amazing. I've learnt a it just watching them. Have you considered selling some of your ideas. Love your BMW gadge video. I'm looking to make a driving sim and I'm definitely using that idea. Love your videos.

@davidmeek6100 6 жыл бұрын

Nice work!

@amstudioprojects 6 жыл бұрын

Thanks Mate!

@guga3355 6 жыл бұрын

I really enjoy your type of making videos, Congratulations ;-) But I have one question, can i use three or four led bars instead of two on a single arduino nano???

@rickyzhao2192 4 жыл бұрын

I tried to do it and it worked!

@masioneafoa8979 6 жыл бұрын

Awesome vid mate. Any possible way i can get the extra custom pieces for your hand-brake mod?

@BeamNgPro 4 жыл бұрын

It's Amazing!

@kennteoh85 2 жыл бұрын

wee got it work with ACC> awesome share

@TomasCTR 5 жыл бұрын

Great videos man...I´ve got one question? Is it possible to connect these led strips together to one arduino with 7-segment led display connected or each thing (7-segment led display and LED strips) need to be connected to own arduino?

@diyer1190 2 жыл бұрын

excellent！you are the best man！

@mattiafanni6667 Жыл бұрын

Very helpful thank you very much!!

@MrFloCat 6 жыл бұрын

Nice video ! Thank you, very interesting. Your triple screens support looks good ! Which one is it ? I'm looking for something like yours.

@Warfalcon 6 жыл бұрын

These recent videos are going to require me to get a 3D printer LOL. Wife is gonna hate me :)

@jimpap2746 6 жыл бұрын

nice video. thank you

@issamsidali9133 6 жыл бұрын

is what you can make us a video for how to make a h shifter with arduino please and you are the best for for the DIY

@wernerpianaar1586 5 жыл бұрын

Great vid!!! Looking at doing my own based on this. All the links from the perspex downward seems to not want to open? Where do I get the perspex and could you please supply the detail on the wire you used as well as the nuts and screws sizes as well as the detail on the soldering?

@mr.anonymous2488 5 жыл бұрын

You are very good...plz make a custom speedometer with 300km .....😀. Thanks in advance

@nadavfedida2200 4 жыл бұрын

Hey mate, got a quick question regarding building this and the screen you made for the sim. I designed a box that incorporates both LEDs and the screen but I want to run just one USB to the unit. Can I wire both off the One USB or will it confuse it and not work properly. Thanks a lot for all these videos. Brilliant work mate. Also I’ll be happy to share the STL file for the screen/LEDs box once I have it all working.

@ronaldacosta313 4 жыл бұрын

Great video!!! I'm making a custom steering wheel for a Lamborghini Gallardo, can I also load this on an actual car ECU? Or directly to the rpm cluster?

@JDMxBL4Z3 6 жыл бұрын

You should create a store front....I'm not to great with stuff like this but I will love to buy one

@Aircraftlol 5 жыл бұрын

Ali Montañez Still interested?

@electronz2288 6 жыл бұрын

It'd be cool if you showed us how to build a steering wheel

@Robert-xc8yw 4 жыл бұрын

Wish i had a fanatec setup man...

@lukaszM46 6 жыл бұрын

This looks awesome but I have one question, can you achieve a similar effect using the board you showed in a previous video which contained 8x 7 segment displays and 8 leds? I think it was using the TM1638 IC as a controller

@nextrider123 2 жыл бұрын

please do a video on your settings in simhub for ur shift light

@Bbeavis 6 жыл бұрын

I run the same steering wheel in my race car :D

@javierpolanco2713 6 жыл бұрын

Good video. I wonder if is possible to use the first and the last led only for to show yellow and blue flag and the other for rpm. It would be awesome. In the simhud i can´t understand how to change those properties

@KToMmi 5 жыл бұрын

Hi @amstudio, ever thought of mounting them directly onto the wheel rim? I'm considering to mount them to my TS-PC formula rim. There's a slot that seems made on purpose for such a mod. Of course I'll be doing the LED enclosure by myself. But what about the USB cable? Will it be a problem when steering?

@mariamarileide6001 6 жыл бұрын

Amazing! You are a genius!

@DanielLopez1994 6 жыл бұрын

That's amazing! Would you know how this can be done on a real car?

@KToMmi 6 жыл бұрын

Hi, ever thought of mounting them directly on the wheel rim? I'm considering to mount them to my TS-PC formula rim. There's a slot that seems made on purpose for such a mod. Of course I'll be doing the LED enclosure by myself. But what about the USB cable? Will it be a problem when steering?

@vid2ification Жыл бұрын

Now i need to figure out how to do this with UDP for function with consoles

@matiaz0 6 жыл бұрын

One more time, amazing work... But I have a question... Is it possible to make with 9 LEDs only?

@amstudioprojects 6 жыл бұрын

Yes its possible

@matiaz0 6 жыл бұрын

How?, please, I only find 8 LEDs in one strip and I want 3 LEDs for every colour.. regards from spain

@benbirch6425 6 жыл бұрын

+amstudio what type of bracket did you use to hold the spring in place on your diy usb handbrake video? The right angled silver one?

@thrustmaswheel 5 жыл бұрын

Hey. I am fascinated by your project presenting the engine speed display with LED strip. As I do not have experience in designing Arduino modules, I am asking for a hint. Will I be able to use one Arduino controller to connect the LED module and analogue Handbrake, which also show how to perform on your other film. Will the Arduino module be able to control the LED strip and be recognized by Windows as a pointing device? Thank you in advance for your answer and I am waiting for more inspiring fans to create new devices.

@michelemmor576 10 ай бұрын

hi! how do you cut perspex? Thank you! Love your videos.

@SuperOliveiraPT 6 жыл бұрын

Someone has any idea how to mount to a thrustmaster t300?? I'm using my smartphone as a Dashboard and having the Lights on top looks amazing

@themaker4216 5 жыл бұрын

You could tape it down with some mounting tape

@mr.empty-0789 3 жыл бұрын

Simao Oliveria how are you using your smart phone as a dash?

@ImThe5thKing 3 жыл бұрын

@@mr.empty-0789 Simhub can stream real time to the phone for a dash or hud like you'd find in Formula/LMP1-2/GT cars

@tanner6817 3 жыл бұрын

I can 3D print a mount

@mattnev8625 6 жыл бұрын

what would i need to do to make an arduino sequential shift light for my E30 track car? can you just make a sketch to read the signal wire?

@CarlosJimenez-ip1ms 5 жыл бұрын

Hello, awesome build. Would like to know, what SIM you are using?

@gustavodmattos 5 жыл бұрын

in this vídeo its asseto corsa

@zombie821 6 жыл бұрын

as always a great Video and thank you for that. I build it a few months ago and testet it with F1 2016, PC1/PC2 and it worked great. Now i have Problems with F1 2016 and the Lights, they don't work ingame but when I press Pause theay light up, back in game they turn off. Any idea what the Problem is?

@bandit650n 6 жыл бұрын

Great job, I just built it easily. Is it possible that the LEDs go from the corners to the center? Thanks a lot

@AldoM2C 5 жыл бұрын

How'd you cut the acrylic plastic?

@st.gr.8796 4 жыл бұрын

Hello Mr. AMSTUDIO, did this also works with 24 LED´s? Update, yes it works!!!

@steveo1964 2 жыл бұрын

what car you driving in this vid sound cool

@antoniotrueba7681 6 жыл бұрын

Hello, I´m bulding a F1 steering wheel and your videos are my principal inspiration, but I found the next problem, exist any way to decrease the brightness of the RGBleds? when I play in a dark room the lights make me blind

@FedorBykonya 4 жыл бұрын

Any thoughts about mounting this masterpiece on G27?) Thanks

@simonedisalvo128 5 жыл бұрын

Thaks a lot for all your video!!! sorry a question how to setup simhub rgb mapping???? Is it possible to share the .leds file to import in SIMHUB?

@alvaroneves8734 6 жыл бұрын

Great job AM. Do you sell the RGB REV LIGHT CASE to or only the file to print them on a 3D printer? I

@amstudioprojects 6 жыл бұрын

Just the files at this stage.

@benjaminb9375 4 жыл бұрын

Very good video. 👍 How did you have one game on three monitors? Sorry for my Bad englisch. I come from Germany.

@antoinepinard2724 3 жыл бұрын

Nice job! Do you think it would works on Xbox? Or only pc?

@alexybodom 5 жыл бұрын

Amazing but can it be modified to be used in real motorcycle

@davegee124 5 жыл бұрын

thanks for the video,got everything wired up ok but for some reason only rgb leds 1-8 are working as intended,the 9-16 rgb are just plain white and lit al the time,any ideas?

@deangamerr 6 жыл бұрын

I Like This video’s

@matk22 3 жыл бұрын

Can you run multiple items on the same arduino. I want to wire this shift light, the gear shift display. Then a button box on another arduino

@leventezari7540 6 жыл бұрын

greeeeat:)

@marcogaiazzi8328 4 жыл бұрын

Great! Im building this one but be aware not to buy arduino nano with ch340G serial chip onboard.... get the FTDI FT323RL or it wont communicate with simhub!

@razormodz1173 4 жыл бұрын

I know this is an older video now but is there a reason you used two led strips instead of a single longer strip?

@Wenya 6 жыл бұрын

Hi Friend!! Could you tell me the layout configuration for RGB REV LIGHTS?

@carlossr2791 2 жыл бұрын

Hi, I just have one question, are the 3d models for the led lights and for the fanatec assembly? Both?

@cinefocus6816 3 жыл бұрын

do you need to code in arduino for this project or you just have to plug it into simhub

@corbadelin2033 5 жыл бұрын

you can make some LEDs to turn off depending on the life and the bullets you have in the counter strike global offensive?

@franciscogoncalves6304 5 жыл бұрын

That’s awesome , I really like these DIY videos , but this is one will be my first , can someone tell me which arduino nano v3 this is ? As the link in the description has 3 versions, 5pcs , 3pcs and blue Which one do I buy ?

@MindstormExpert 4 жыл бұрын

Which one did you buy and did it work?

@arnaldifero1 5 жыл бұрын

Good morning,Great video,I wanted to ask the bracket to attack a fanatec csw where do you buy,Thank you.

@amstudioprojects 5 жыл бұрын

pinshape.com/items/39100-3d-printed-rgb-fanatec-mount

@arnaldifero1 5 жыл бұрын

@@amstudioprojects Thank you very much.

@something7992 2 жыл бұрын

If only someone made the same content but for your real car

@TheWeedpoppin 6 жыл бұрын

first of all thank you so much for sharing and just a question how i can do the same but with arduino micro cause simhub doesnt support it and when i open in arduino ide i wrote the sketch but nothing happens no lights...thx

@AndyBradley1984 3 жыл бұрын

Once the Arduino is flashed do you still need to run the SimHub software and settings on the host machine for the LED's to function correctly? or is it just plug and play with any PC?