Make ATtiny85 IR Remote Control Device Using Relay Module | Learn AVR Microcontroller Programming

No video

Make ATtiny85 IR Remote Control Device Using Relay Module | Learn AVR Microcontroller Programming

Рет қаралды 41,567

3 жыл бұрын

Make 4 Channel IR Remote Controlled Home Automation System Using ATTiny85 Microchip & 4 or 2 Chanel Relay Module.
More can be learned through this video tutorial
1. Details of how ATTIny85 AVR Microcontroller and Arduino connection or interfacing
2. How to Programming or Coding ATTiny85 Using Arduino.
3. How to make 4 Channel Remote Module for IR Remote Controll.
5. How to Decoding & Coding IR Remote Controller Data.
6. How to connect Arduino with IR sensor - TSOP1738 or TSOP1838
7. How to use Serial Monitor of Arduino IDE Software
8. How the IR remote works
9. How to make remote controlled home automation Using AVR Microcontroller - ATTiny85
10. AVR Microcontroller ATTiny85 Programming
Thanks to M.A. Mostafa From ORNATE PEXELS
Arduino Related Video
Interface Ultrasonic Sensor With Arduino
Link -
• How To Use Ultrasonic ...
///////////////////////\\\\\\\\\\\\\\\\\
Download PCB Layout & Circuit Diagram of ATTiny85 IR remote relay switch
From this link -
drive.google.c...
\\\\\\\\\\\\\\\\\\/////////////////////
#ATtini85_How_to_make_4_Channel_IR_remote_relay_switch

Пікірлер: 116

@rafiqueahmed9039 3 жыл бұрын

I have solved the problem by trying again and again. Now the circuit is working. I got the guideline from you. So thank you so much.

@michaelmiranda3589 7 ай бұрын

Very informative video..thanks you sir mostafa..

@OrnatePixels 7 ай бұрын

Thank You 🌺❤️❤️❤️🌺

@0124akash 6 ай бұрын

Very clear and to the point vdo. Thanks for making this.

@skmulaye1 2 жыл бұрын

sir, you have explain this video nicliy,I will foiiow u steps,Ilik very much thanks Ornate Peexels

@OrnatePixels 2 жыл бұрын

You're most welcome Brother, Best wishes.

@skmulaye1 2 жыл бұрын

Sir, I tride to add ATTINYCORE in Tools,Board,Board manager but page remain as it is,not allowing to add,so can I get ATTINYCORE URL ,so I can type url in additinal board manager in preferance

@OrnatePixels 2 жыл бұрын

You can try by this URL address- drazzy.com/package_drazzy.com_index.json

@skmulaye1 2 жыл бұрын

@@OrnatePixels thank you sir,finaly I have solved the problem because of you,thak you very much

@galagomara3611 3 жыл бұрын

One of the best videos I have ever seen in youtube so far. Thank you very much.

@OrnatePixels 3 жыл бұрын

Thank You Soooooooooo much Brother.

@azmanahmad2820 2 жыл бұрын

the best one...may Allah always bless you and yr family and easy yr rizki always..Aaminn

@alaanoor3679 11 ай бұрын

very clear instructions , good job sir !

@VMalthane 5 ай бұрын

Can an Arduino Uno be substituted for a CH341A programmer to read/write .bin files to an EMMC like the 25Q32 (commonly used in LED TVs and various other equipment), if we supply 3.3V separately to the EMMC? Well done, bro! !!

@atihrot755 Жыл бұрын

I wish you a good day. Thanks for the great project and explanation. It works great. Well thank you. Keep up the good work and good luck.

@anokhautomation4453 Жыл бұрын

Very very useful tutorial 👍 thanks for your detailed explanation 🙏

@cathelenaa 3 жыл бұрын

Good explanation

@OrnatePixels 3 жыл бұрын

Thank You

@ikehsamuelifeanyi4925 Ай бұрын

I did the project with Attiny85, it worked greatly but I tried the same code with Attiny84, it failed to upload the code with error showing can't compile to Attiny84? What shall I do ?

@m.sanjibkumarpatro5759 Жыл бұрын

Very good explain

@mugiraharjo6270 11 ай бұрын

Great, what if use potentiometer, then

@rafiqueahmed9039 3 жыл бұрын

Thanks Sir, I an your big FAN

@OrnatePixels 3 жыл бұрын

You're Most Welcome Dear Brother

@unexploredtour769 3 жыл бұрын

Thanks for your explanation

@OrnatePixels 3 жыл бұрын

Most welcome Bro.

@cyberstar251 10 ай бұрын

also can this be modified to only use one relay?

@electronicscircuitanup2246 3 жыл бұрын

Thank u so much nice explain this video good working

@OrnatePixels 3 жыл бұрын

Most welcome Brother, many many thanks.

@entertainmentknowledge6655 2 жыл бұрын

awsome

@mgalekar 7 ай бұрын

Before uploading the code to ATtiny85, I tried to burn the bootloader.....but I got following error Failed chip erase: uploading error: exit status 1.......Pl.HELP otherwise explaination is tooo gooood!

@prasadadavi6618 3 жыл бұрын

Hello Brother, do you have an example of IR Remote using ATtiny85? I have the HEX codes of a faulty Samsung AC remote and I want to build a small remote to just switch on, off and temp raise and lower functions

@rafiqueahmed9039 3 жыл бұрын

Sir, Is ATtiny 85 and Tiny 85 the same IC? I ordered ATtiny 85 ICs. But Cellar send me Tiny 85 ICs. I am programming according to your video. But it is not working. What to do now ?

@anokhautomation4453 2 жыл бұрын

Nice project 👍

@nirusl443 2 жыл бұрын

thank you sir....... 💯💯💯💯💯💯💯💯

@OrnatePixels 2 жыл бұрын

You're most welcome🌷♥️

@jahagirsarkar3891 10 ай бұрын

মোস্তফা ভাই ভালো আছেন আপনাদের দোয়ায় আল্লাহর রহমতে ভালো আছি মোস্তফা ভাই এই সার্কেটের কডিং কিভাবে লেখে একটুখানি দেখান

@chetan26726 3 жыл бұрын

Is it possible to programming by phone by arduino android ied software?

@OrnatePixels 3 жыл бұрын

Yes Bro. You can download Arduino IDE App from google play store to connect phone to Arduino, You need OTG cable supported smart phone for that case.

@alejandrosanchezdorta1812 5 ай бұрын

Hello sir, good evening from Cuba. I would like you to help me with this code. If you could publish it in full, I would appreciate it. Thank you in advance.

@VimalJainbpl 3 жыл бұрын

I purchased Attiny 85 and module from Quartz components, but all are duplicate and not working. So please help me to get original Parts.

@hafijurrahmansipar1180 2 жыл бұрын

Arduino remote library are not working when i uploaded the code in attiny85. Is any different library file for attiny?

@antoniovalmirmoraes5417 2 жыл бұрын

Good Night Sir! Could you teach me how the IRremote library was made to work with ATTiny85?

@Drxxx 3 жыл бұрын

Great video!!

@OrnatePixels 3 жыл бұрын

Thanks Bro.

@rafiqueahmed9039 3 жыл бұрын

I have ATTiny45 and ATtiny13A IC with me. Do the ICs work in this relay module?

@OrnatePixels 3 жыл бұрын

You can use ATTiny45

@usmanelectronic9806 5 ай бұрын

Dear Sir Hope you are fine. If we use 4 + lights control with remote then how can control 🤔

@OrnatePixels 5 ай бұрын

A maximum of four switches can be made by the ATtiny85. Many switches can be made by ATtiny2313. thanks brother 🌹🌺❤️🌺🌹

@usmanelectronic9806 5 ай бұрын

Thank you sir 🥰😍❤

@sawoodkhan1404 2 жыл бұрын

not able to instal ATtinycore from board manager need help

@rafiqueahmed9039 3 жыл бұрын

Thanks a lot

@OrnatePixels 3 жыл бұрын

Welcome Brother

@qadeer1685 2 жыл бұрын

24C0 16ic 4 channel relay remote kit program video please sir

@OrnatePixels 2 жыл бұрын

Yes brother, I will show you how to make it with EEPROM, Stay well, thanks.

@rafiqueahmed9039 3 жыл бұрын

Sir, I am still trying to make the circuit work. The circuit is working occasionally and is malfunctioning most of the time. I see a problem while taking the code of the remote button from the serial monitor. When one button on the remote is pressed three times, three types of code come to the serial monitor. I have used several remotes. Same problem was found for every remote. Why is this happening? Please help me Sir. I'm upset and bad mood about the circuit

@rafiqueahmed9039 3 жыл бұрын

I have many PIC Microcontroller ICs . Can I program these ICs with Arduino IDE Software?

@OrnatePixels 3 жыл бұрын

Yes brother, it is possible to do PIC microcontroller programming by Arduino.

@mdparves7172 3 жыл бұрын

ভাই এই resistor এগুলোর মান কি 100 ohm 560 ohm হবে নাকি 100k 560k হবে দয়া করে বলবেন।

@gigi655 2 жыл бұрын

With attiny 13a I am also interested if possible

@younasatta 2 жыл бұрын

Good bro

@OrnatePixels 2 жыл бұрын

Thanks Bro. 🌺🌹❤️🌹🌺

@VimalJainbpl 3 жыл бұрын

Sir, I upload the code to the Attiny 85 but fail to control 4 relay module board, I am new to Arduino but having the knowledge of electronics, I am scale railroad hobbyist, age 77. I hope you help me in this project.

@OrnatePixels 3 жыл бұрын

Dear Sir, Relay modules are usually common negative. But the code I gave is for Common Positive, because I didn't use the relay module in the video. I gave the code for common negative in the link below. Thanks. drive.google.com/file/d/1A5rRXA9T93qxiT-CvsKzEPw6MUUpaL52/view?usp=sharing

@VimalJainbpl 3 жыл бұрын

@@OrnatePixels Thanks, I will try

@ElabIndustrial 2 жыл бұрын

Upload more of the Arduino project

@cyberstar251 Жыл бұрын

is there a parts list included?

@girishchandra6722 2 жыл бұрын

Sir I uploade code to my arduino nano its not works plz help me sir

@electronicscircuitanup2246 3 жыл бұрын

Plz full explain arduino programming a.c fan regulator dimmer circuit video

@TW39 Жыл бұрын

What the signal frequency distance

@aone_channel 2 жыл бұрын

can i use 5v relay module board

@OrnatePixels 2 жыл бұрын

Yes Bro. ♥️

@TheMrsunday 3 жыл бұрын

I don't have the ATtinyCore on my boards manager.ow can I install it. thanks

@OrnatePixels 3 жыл бұрын

Click on Preferences from the file in Arduino IDE (File > Preferences), then paste this URL " drazzy.com/package_drazzy.com_index.json " in the URL box and click OK. Then Tools > Board manager, then type ATTiny Core.

@TheMrsunday 3 жыл бұрын

@@OrnatePixels thank you very much sir

@manhcuong1356 3 жыл бұрын

Hi bro, how can i add 4 buttons ?

@marthinmindi9824 7 ай бұрын

Thank you. I need to 10 channels. Can you share to you tube please???🙏

@aijazahmed9113 2 жыл бұрын

Circut diagram file not opening?

@crazycoolguy109677 3 жыл бұрын

Hey friend please explain code get key part?

@fazlayrabbi3296 Жыл бұрын

Mini IC ar number koto brother??

@amanfaizal7848 3 жыл бұрын

great video man! could you please help me, I've done till Attiny85 coding, after that when i click on remote buttons, Attiny85 isn't responding. I've flashed blink Sketch etc, so Attiny85 is working. I guess its due to IR values I uploaded. it was in hex format, do i need to convert it to decimal values??

@OrnatePixels 3 жыл бұрын

There are many different web sites to easily convert decimal from hex. I am very sorry brother for replying late.

@amanfaizal7848 3 жыл бұрын

@@OrnatePixels its okay bro! I've already rectified the issues after a day of posting this comment. Now its working perfectly 👍 thanks for replying!

@intelligentprocessorai396 3 жыл бұрын

same problem to me after all.. when i install a blink code so its work

@intelligentprocessorai396 3 жыл бұрын

but ir didnt work

@lkscientist7816 2 жыл бұрын

@@amanfaizal7848 i have same problem...please give me the working code

@md.shohel2493 Жыл бұрын

ir decoder apps download link diya jabe

@sonu9999208499 3 жыл бұрын

Sir make a another video with eeprom for last state saving of relay aftet powercut

@OrnatePixels 3 жыл бұрын

Excellent your thoughts, ok brother, I will give you that video. Thanks a lot.

@sonu9999208499 3 жыл бұрын

Sir pls make with eeprom

@raushankashyap1482 3 жыл бұрын

Can you add a manual switch in this circuit

@OrnatePixels 3 жыл бұрын

One manual switch can be connected parallel to each relay switch.

@raushankashyap1482 3 жыл бұрын

@@OrnatePixels but 1 prblm, manual switch off then Relay not work.

@electronicengineeringlab1010 2 жыл бұрын

is programming ko mobile sa karka dekha,.

@KajalKantiMukherjee 3 жыл бұрын

No circuit diagram link is available there. Please send me the link

@OrnatePixels 3 жыл бұрын

I have given the link now Sorry for the delay. Good luck.

@KajalKantiMukherjee 3 жыл бұрын

Thank you. Please post more related videos 🙏🙏🙏

@OrnatePixels 3 жыл бұрын

Of course brother. Best wishes.

@sonu9999208499 3 жыл бұрын

Sir pls add eeprom in this code

@qadeer1685 2 жыл бұрын

attiny85 4 channel bluetooth

@technicalindra2697 3 жыл бұрын

Attiny 13a ka use karke Ir remote control switch ka video banaya please

@OrnatePixels 3 жыл бұрын

I'll make it. Thanks Brither.

@technicalindra2697 3 жыл бұрын

Attiny13a program using arduino board please.

@technicalindra2697 3 жыл бұрын

SMD Attiny 13A

@unexploredtour769 2 жыл бұрын

zip folder is empty

@ganeshgaikar8099 2 жыл бұрын

Sir cod open nahi hota

@majadjaved9575 8 ай бұрын

Dia grame how.i dowmload

@OrnatePixels 8 ай бұрын

There is a download link in the description of this video.❤️

@VimalJainbpl 3 жыл бұрын

sir Give the link for ATTiny core link

@OrnatePixels 3 жыл бұрын

Best Wishes Bro. drazzy.com/package_drazzy.com_index.json

@VimalJainbpl 3 жыл бұрын

I find the link, upload the code in attiny 85 today. I am the scale Railroad hobbyist age 77 now, new to digital world. So this is the problem with me.

@MonirHossain-xt7hq 3 жыл бұрын

bro attny85 ic how money price?

@OrnatePixels 3 жыл бұрын

160/- Bangladesh Taka (1.7 US dollar)

@NirobRoy-nk3zf 4 ай бұрын

আপনাদের ঠিকানা কোথায়, ফোন নাম্বার দেওয়া জাবে

@rafiqueahmed9039 3 жыл бұрын

Sir, Is ATtiny 85 and Tiny 85 the same IC? I ordered ATtiny 85 ICs. But Cellar send me Tiny 85 ICs. I am programming according to your video. But it is not working. What to do now ?

@OrnatePixels 3 жыл бұрын

If only Tiny85 is written on your IC, it may be fake.