Make it Extreme's Metal Vise

Рет қаралды 3,580,819

7 жыл бұрын

Extremely essential is the TOOL made in this week’s PROJECT and it could not be anything else but a ‘heavy duty metal vise’.
► Click HERE to subscribe to Make it Extreme: bit.ly/MakeitExtreme
► Second Channel: bit.ly/MakeitExtremeShorts
• Get access to the downloadable Plans: bit.ly/MIEplans
• All details: bit.ly/2oKvvAi
• Help us on patreon: bit.ly/MIEpatreon
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.co.uk/shop/makeite...
-----------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitextreme
• Instagram: bit.ly/makeitextreme
Angle Grinder Hack Videos:
•Hack 1: bit.ly/25r51WF
•Hack 2: bit.ly/22rrtK2
•Hack 3: bit.ly/1OSzzn4
•Hack 4: bit.ly/2aP8A3X
•Hack 5: bit.ly/2k2P5HS
• Playlist for all videos: bit.ly/2gZL4Dg
• Intro Design: vimeo.com/90149001
♫ Music by ANIMATTRONIC
1st "King Crab"
2nd "Fluid"
3rd "Solari Arena"
Check More: www.animattronic.ca/music-store
• Special Thanks to our Patrons:
Travis Burmester, Devin Herbert, Craig wilson, Benjamin Ravaud, Adam C Grayhoughton, Arturo Cañedo, Eduardo Dominguez Garcia, CHEN DAHAN, Efraín Gonzalez, Bradley Shanks, Sean Mayes, Jens Jungevik, Matt Braithwaite, Cody Nelson, Ben Barwick, Arts, Jack Garrett, John daly, Donkoku, Sera Smith, Carlos Andrade, Sebastian Wecer, Michael Stevenson, Andrew Drozd
#makeitextreme #makeitextremeshorts

Пікірлер: 1 900

@MakeitExtreme 7 жыл бұрын

Backstage photos and project drawings are now available through Patreon. If you like our projects and you wish to help us make bigger and more extreme projects please feel free to contribute. Link: bit.ly/MIEpatreon

@fkavan 7 жыл бұрын

You should also make a prisamtic jaws for your vise. I see you have a router so that should be no problem.Nice project by the way :)

@fitzyholden1036 7 жыл бұрын

Thanks mate. Hope the linisher you made a while back is there.

@coldbloodedfasist5536 7 жыл бұрын

you ruined it by painting it a lame color! what a dush..

@RedeyesGaming 7 жыл бұрын

Make it Extreme thank you for your videos. my skill sets usually exceed my budget. designs like these help me improve my arsenal in the shop

@riotstream5996 7 жыл бұрын

Every company has their branding. They chose that particular color of green early on so they might as well stick with it

@artpimentel5244 8 ай бұрын

This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@Jer_Schmidt 7 жыл бұрын

Wow! You totally blew me away with this one! The dovetail jaws and thrust bearing on the screw are fantastic features!

@MrAnthony992 4 жыл бұрын

That's nice, but have you seen the vise from fireball?

@takeaseat6969 4 жыл бұрын

Fireball vice is definitely superior. Those dovetail cut jaws are going to loosen up eventually.

@lllllREDACTEDlllll 4 жыл бұрын

@@takeaseat6969 Yah this should be the Make It Heavy Channel

@TheNajSD 4 жыл бұрын

I just bought fireball's plans. Look forward to having it.

@markharrisllb 4 жыл бұрын

The guy from Fireball tells you what he’s doing and why. That is invaluable information for someone like myself who knows nothing.

@alyx1715 4 жыл бұрын

Only in 2020 can a guy put a ton of effort into showing the world how to build a beautiful vise and get bitched at

@BarChrome 6 жыл бұрын

Words can’t express how much I love this channel. Amazing to watch and learn.

@ashleyavenuemusic 4 жыл бұрын

that is the weirdest method of building a vise i have ever seen. im just imagining all the gaps internally

@ashleyavenuemusic 4 жыл бұрын

@@helmartorneiro9673 bruh at least Google translate it to my language before commenting on my comment

@Mogman150 4 жыл бұрын

It does not benefit (strength wise) from all the thickness of the steel. Welding just the edges doesn't cut it.

@ashleyavenuemusic 4 жыл бұрын

@Gun Shy the fuck? lmao

@avenged277693 3 жыл бұрын

i was thinking the whole time this reminds of lego

@timothydalton90 3 жыл бұрын

@J.C. Kohle its been three years and he is still using it in his videos. In two years it will look and work just as fine. Hating on others doesnt make your sad and lonely life better. So shut the fuck up and get something done by yourself you sad little wanker

@SpecialStealth 7 жыл бұрын

As usual, you guys are amazingly artists to the core. I am really well entertained. Thank you.

@shedmanx3640 4 жыл бұрын

I still have my dad’s homemade vice he built as an apprentice 60 years ago. I’ve restored it twice. It’s still solid no matter how much pounding it’s been through. It has minor shortcomings but I’d never part with it.

@budzillasohoski9858 6 жыл бұрын

Metal working on Mt Olympus....You my friend are an amazing fabricator. I have seen a lot of videos but your builds are truly art. Thanks for your contribution to KZfaq.

@Bigtwin88 7 жыл бұрын

Nice vise ...Great project ....Thank you

@humblehombre9904 5 жыл бұрын

You are by far the best building channel on KZfaq. And, your videos are Devastating! Love the heavy music theme!

@donbeeler49 7 жыл бұрын

That's insane......coolest vise I've ever seen in all of my 68 years.

@Clambelly 7 жыл бұрын

Incredible ! Absolutely amazing.

@MechNinji 7 жыл бұрын

Wow! this is amazing! absolutely love it!

@AzMarineGhillie 4 жыл бұрын

Very nice build brother. From the simplest of pieces to a completed master tool! Thank you for the tutorial as well as making the info available. Much respect for you and those working there not in the video.

@Ockie_Bosveld-Bladesmith 6 жыл бұрын

Love all the videos . Started building some of the stuff by myself. Using my own mark. Rebuild a drill press and bench grinder

@jayeshtrivedi1145 7 жыл бұрын

You are doing great job. Can you please give detail of cutting wheel used at 0.25 min.

@ERPP8 6 жыл бұрын

"How to make a heavy-duty vise from MIG wire." Great video though!

@herbertbielefelder341 6 жыл бұрын

AWESOME. It's easily one of the best vises I've ever seen.

@user-cp2hm9bz1n Ай бұрын

I watch you and imagine you are a maestro who makes iron play a symphony - you are wonderful and creative -May God bless you and bless the work of your hands, well DONE

@anon746912 7 жыл бұрын

Complete and utter overkill. I love it!

@SuperPersianLord 7 жыл бұрын

Wrong, It extremely weak design. Absolute crap, and I'm not joking.

@apexmike849 7 жыл бұрын

It's actually only as strong as those edge welds - agreed. It's strong, but not as strong as it would be if it had been cast and machined.

@pstrap1311 7 жыл бұрын

The weakest point is the joint between the channel section and the moving jaw. All the rest is super overkill to match that but the excessively heavy construction gives it enough mass to be an effective anvil. An I beam or channel on its side would have been better but the channel is pretty frickin stiff as is. obviously a solid piece of metal would be more bomb proof, but it would literally take a bomb to damage that thing. So no, it's not an "extremely weak design". It's a good design. Dick.

@SuperPersianLord 7 жыл бұрын

Weak!

@pstrap1311 7 жыл бұрын

SuperPersianLord Oh yeah I guess you're right. It's probably gonna break, huh? Whatever man.

@Tex81024 7 жыл бұрын

every time I watch a MiE episode: "This is the most over-engineered and over-built piece of crap I've ever seen, I want 10."

@MohdAkram-gk8tt 6 жыл бұрын

The result of hard work and passion. Proud of You. Thank You friend.

@hnobleh 6 жыл бұрын

Love the vise. It's extreme and should never break or wear out. Great Job and thanks for the video.

@alonzosanchez8577 7 жыл бұрын

incredible!! Great Job really!

@MaxMakerChannel 7 жыл бұрын

"You call that a vise? This is a vise!"

@betoen 7 жыл бұрын

That is a spoon...

@ShamWerks 7 жыл бұрын

Only try to realize the truth. There is no spoon.

@kandalfus 7 жыл бұрын

monster vise

@scwfan08 7 жыл бұрын

Crocodile Dundee would be proud.

@CPTR0NIC 7 жыл бұрын

"there is no spoon..." ;)

@joshuasindiga1788 6 жыл бұрын

this is a good way to learn new skills.. Thank you |Make it Extreme|

@anonymousgeorge4321 7 жыл бұрын

Wow! One of the coolest projects I've seen on KZfaq. Thanks!

@TheRealObiWahn 7 жыл бұрын

What was that spray you've used before welding? I'm starting to weld now and I have never seen a spray get used...

@huntervalleygroupptyltd3665 7 жыл бұрын

TheRealObiWahn anti splatter spray. Google it

@TheRealObiWahn 7 жыл бұрын

Thank you very much :)

@unitedstatesofbuild4915 7 жыл бұрын

Shop hack: Cooking spray from the dollar store, $1 a can. Id never use cooking spray on spec parts but for personal stuff its ok. I actually wipe my welding table down with a thin layer

@maggs131 4 жыл бұрын

I bought a 150lb vise for 100$ yesterday at a flea market. It isnt a layer cake either

@heru-deshet359 3 жыл бұрын

And you didn't have to spend thousands in equipment to make one, :)

@TheHeavensHell06 3 жыл бұрын

@@heru-deshet359 spending thousands on equipment, and u can make thousands of homemade tools, DIY projects with it....

@zenzaleni 6 жыл бұрын

that was an awesome build, seriously impressed at your expertise..Thank you

@jamescountryman2669 6 жыл бұрын

This is the first video I’ve seen, great work. I’ll have to binge watch the rest lol

@MCSDorneles 7 жыл бұрын

That demo on the end.... dayum boy, this thing is strong! Awesome work, as always. I was missing the john deere green spray. also, the number u put is the number of the project?

@KastaRules 7 жыл бұрын

Please build a *Bagger 288* next!

@arcturusbbqsausagemaking2435 5 жыл бұрын

Great job, Im a retired welder Fabricator of thirty seven years You got skills bro ... Well done

@thomaslamora1679 6 жыл бұрын

That's Extreme(ly) sick! Love it, awesome to watch.

@MUSTAFA-GowR 7 жыл бұрын

wooow Amazing

@camillesennegon 7 жыл бұрын

an anvil !? make a propane FORGE ! ( i know you have a foudry....)

@mxcollin95 5 жыл бұрын

Man everything project you do is legit!

@markcobb6561 6 жыл бұрын

this is one of , if not the best diy channels on youtube. love it.

@MartinRodriguez-yr4gf 7 жыл бұрын

For all the welding and grinding, that thing probably has very little strength s the lower beam(channel iron), has it'strength in the other direction. A few good loads against the top of the jaws and that channel will bend.

@tandemwings4733 6 жыл бұрын

Agreed. Saw the same thing. But, anyway, he gets paid for the ads.

@Argentvs 5 жыл бұрын

You could reinforce it using some steel nerves inside it angled.

@clay6637 5 жыл бұрын

100% He is a Very good fabricator but taught himself i would say . Also vertical down and dragging the mig on something that is meant to be strong is a No No.

@eduardosampoia5480 4 жыл бұрын

@@clay6637 dragging is just as strong as pushing...maybe even a little more. It's 2019.

@mercer982 4 жыл бұрын

@@eduardosampoia5480 welding downhill is another thing tho. And he seems so be doing it quite often to make hes welds look smoother.

@sophiatheodores7985 7 жыл бұрын

theese guys dont fucking joke around huh

@lesmoor001 5 жыл бұрын

so much respect for guys with craft skills

@steveveness3829 6 жыл бұрын

Ahhh the day's when I actually had a work shop to build proper tools😊 Love the work guy's 😊

@KrisBendix 7 жыл бұрын

You can make a vise, and then make a vise with it. Or vice versa.

@MaxMakerChannel 7 жыл бұрын

That is the best pun I read all week.

@zanpekosak2383 7 жыл бұрын

😂😂😂

@lilozwelder8064 7 жыл бұрын

Kris Bendix ha I get it took me a bit to get the joke

@johnmood5653 7 жыл бұрын

vice versa? A vise grips things. vice is a crime of moral turpitude like prostitution, gambling etc... Unless I suppose you're going to gamble on a cheap vise like I did! B-)

@douglasalan7786 7 жыл бұрын

Didja lurn them thar verbical rools beakuz yer mamma dun dealt with the vyce a hole lot ?

@moriororbi6963 6 жыл бұрын

Man, i love these stuff

@fabiandaroca 5 жыл бұрын

All I can say is WOW!!!! Beautiful project....

@oneshotpete6.591 6 жыл бұрын

Regardless of potential strength and or lack of teeth on jaws or inability to pivot , the sheer amount of fabrication and execution of a plan , earns this video a thumbs up and a sub... Gr8 job !!!!

@egdiesther_7 7 жыл бұрын

excelente presentación seria posible obtener las medidas de este tornillo de banco? Muchas Gracias .

@69januel 5 жыл бұрын

Más o menos 52 cm de largo y 1" 1/4 de diámetro.

@DIYCreators 7 жыл бұрын

That's pretty sweet man :)

@MakeitExtreme 7 жыл бұрын

Thanks brother! :)

@carlosalbertorocha3003 5 жыл бұрын

Parabéns lindo trabalho incrível você é um artista, mesmo

@alienh1701 6 жыл бұрын

I would love to spend a month working in your shop! You guys are awesome. Blessings.

@jorgenlannock 7 жыл бұрын

The anvil vise :D

@user-jt4nh6pv5u 7 жыл бұрын

Молодцы. Это и есть сделать из ничего, хорошую вещь.

@serkisdav 7 жыл бұрын

Cогласен на 100%

@user-ue9ts1zj3w Жыл бұрын

Прям уж из ничего,из нашего металла.

@wpowerwagon 4 жыл бұрын

Now that’s 1 hell of a vice, and thanks for sharing your thoughts and great ideas in your videos

@ecrusch 6 жыл бұрын

Really love your videos brother...honest. Great music too. Also, your video making skills keep getting better & better

@mactriz5411 7 жыл бұрын

Great job ;-)

@blitz__r6806 7 жыл бұрын

Could you make something like an engine this would be extremely awesome !?

@danl.4743 7 жыл бұрын

lol

@banmadabon 5 жыл бұрын

@@danl.4743 I think he secretly wishes he makes a spaceship engine but he's too shy to ask...

@jmjmservices 5 жыл бұрын

You done a fantastic job..great craftmanship and skill..

@madometal 6 жыл бұрын

Wow ..this would have to be the best custom vice i have ever seen being made ...this guy is an absolute genius

@Intense951 4 жыл бұрын

Cool vise, but under heavy load I'd expect this to fail due to poor weld penetration or bind from excessive deflection in the channel.

@meadoraustinr10 4 жыл бұрын

GentleBalls how much load do you think you would be able to get by hand? I doubt anyone would ever put enough ass into that to break it

@25centsapop 4 жыл бұрын

Please tell me you pre heated that massive heat sink before mig welding it

@maggs131 3 жыл бұрын

Of course he didn't. You know every one of those shitty welds cracked

@freddieroachy7142 6 жыл бұрын

The scraps he took is already prepared, u cant fool me dude hahaha

@wendellopes001 7 жыл бұрын

você e muito louco, ficou o máximo, parabéns, o Brasil está vendo seus vídeos, ganhou mais um inscrito.

@tobyogden9302 4 жыл бұрын

Holds something against it... that looks about right, weld it on

@jheisontc6654 7 жыл бұрын

Para el siguiente vídeo !!!!!!!!!!!!!! -PRENSA HUSILLO !!!!!!!!!!!!!!!!!!!!

@joekafara 5 жыл бұрын

Damn I almost forgot, very very nice video and a beautiful project!! I envy you that you have the time to do this kind of project!! But more power to your brother!! Very nice job on the Finish also!! You know what they say if it's rusted it can't be trusted LOL

@williamclark3583 6 жыл бұрын

Cool. Not only is the build cool, but the added part at the end of the guy sitting on the bar is really cool as well. I wasn't sure it was going to do its job well until I saw that.

@lastlineofdefence8182 7 жыл бұрын

This thing is awsome,great work🛠👍🚀🌋🍺

@charleschan8670 4 жыл бұрын

How does this compare to the red Fireball vise?

@aidanfoxmetalworking2078 4 жыл бұрын

More areas to fail on this one

@vinceredd1141 4 жыл бұрын

It doesn’t lol

@Mike-mi4nn 5 жыл бұрын

Top notch fab work fellas. Max Maker stole the words right out from under my fingertips.

@altondavis4493 5 жыл бұрын

Now that's a vise!!! I Love it!!!

@kirkpennock2997 7 жыл бұрын

The channel steel seams like the weak point, no ability to turn, and no teeth on jaws. But, a nice weldment.

@diegor1115 4 жыл бұрын

Show us yours

@ollinolle1433 4 жыл бұрын

Agree! extremely flaw mounted with just pair of tiny bolts ..will it having strength to endure shear and tensile stress

@m.emrahozkaya9903 7 жыл бұрын

this thing is like a tank! How did you cut the female threads, on lathe or ready piece? A file test on hardened jaws would be awesome. Thanks for sharing.

@serkisdav 7 жыл бұрын

all are custom made dude, I was there when he make it :D

@florencemarini6306 7 жыл бұрын

Where is that? How did ? female threads?

@speedsterh 7 жыл бұрын

In Greece I think

@cid4887 7 жыл бұрын

1:33. the one being held.

@zioxei 7 жыл бұрын

I think he made it on the lathe because the thread was wet from oil and it had sharp edges, also the outside surface didn't quite look like it was a ready piece from a store

@deweys 7 жыл бұрын

Great editing! Vice looks good too :D

@drumtwo4seven 5 жыл бұрын

Sweet vise!

@trevorbaugh1335 6 жыл бұрын

Don't you want your vice jaws softer than the workpiece you're securing, not harder?

@MrJonas2255 6 жыл бұрын

Nate B. That's my understanding, yes.

@jahobr 7 жыл бұрын

Are you transferring the full clamping load using this puny bearing at 2:20 ? I doubt this will last long. Just compare the surface area your threads use to spread the load versus the small 20 contact points of the ball bearings. Way out of proportion.

@jamesolivier3192 7 жыл бұрын

You are correct, clamping load is transferred to those bearings, I bet when that vise is clamped tight, the force put on those bearings will be 10x+ what they are rated for, let alone any amount of flex in that jaw will transfer the load to mainly the top few balls. definite failure point.

@robertzoboski3254 7 жыл бұрын

First video of 'Make it extreme' I've watched. Wicked cool!!! You are very talented, ......, I shall keep watching, incredible!

@NeilJeanLouis 7 жыл бұрын

Guys you are extremely Smart. I love your videos, thank you for sharing

@someone-wv8uh 7 жыл бұрын

metal lath plz

@123chrispapa 7 жыл бұрын

you should try make a sand blaster :)

@apocalypse92ia 7 жыл бұрын

chris papa they did already and it came out awesome

@unitedstatesofbuild4915 7 жыл бұрын

Or a vise!! JK couldnt resist

@peterxyz3541 7 жыл бұрын

I bow 🙇🏻 down to your mad skills! I don't have enough experience to trust your vice on such a small bass.....but, you're sitting on a fulcrum locked in the vice on that base!!! 👍🏻👍🏻👍🏻👍🏻👍🏻

@betoleal747 6 жыл бұрын

That's insane, dude... Congrats!!!

@norlure 4 жыл бұрын

Wow... there is so many " coffee shop expert " in the comments below.Good work Make

@cdimmm 7 жыл бұрын

you sure like to weld

@timsworkshop85 6 жыл бұрын

Dude, now that's what I call a vice! Awesome!

@GetHandsDirty 7 жыл бұрын

Fantastic ideas all the time! You guys are so amazing and execute things Extremely well!!

@lagartija101 7 жыл бұрын

92kg omg

@badass2270 7 жыл бұрын

Хорошие тиски, но много металла пошло на изготовление, если это просто металлолом, отходы были то себя оправдывает. з.ы. Что ж вы в мастерской закалку начали делать, весь пол в масле, песком надо засыпать ;)

@serkisdav 7 жыл бұрын

Я их друг, да все материалы отходы были, они не чего не выбрасывают, все используется. Мастерская после проекта чистеца. Спасибо за комент брат.

@felixlab9951 5 жыл бұрын

you are bloody good mate,wish i could do that,thanks for your effort great to watch

@POC32768 5 жыл бұрын

Another brilliant idea from "Make it Extreme". Well done...

@dkstepper 7 жыл бұрын

Damm you know how to make tools

@jonjohnson102 6 жыл бұрын

he uses *google* dumb ass

@SuperPersianLord 7 жыл бұрын

Not to be an ass, but this is an extremely weak design, your clamping strength is severely hindered. Look at a vise that an engineer has designed. 2:30 That channel steel should be welded standing on end with another piece adjacent to it (to form a tube). You have no more clamping strength than a medium size harbor freight vise. P.S. I've broken quite a few vises, I'm well aware of where their weakness is, and it's almost always in the guide area.

@turboslag 7 жыл бұрын

Same. That channel slide is the weak link. Good fab'ing job though.

@001desertrat3 7 жыл бұрын

+ SuperPersianLord - OH! , So you're the guy who breaks the Anvils with a Rubber Mallet, HUH. LOL

@OU81TWO 6 жыл бұрын

Yeah but he gets comments like "amazing" and "awesome" so that's all that matters here on KZfaq right?...this place is all about perception and not reality. lol

@maynard5955 6 жыл бұрын

I was thinking the same if you go to cranking on that long handle that channel iron will bend then the jaws will never match again he should of made the slide out of 3 +3/4 plate box 3 pieces and i don't think it would bend any it was a good looking vice it gave me an idea for one anyway all the good ones are high as hell and all the cheaper ones are junk

@laalaa4714 6 жыл бұрын

also maybe the grooves on the screw were a bit shallow? and i fuckin love building things you need on your own but i always want and kinda need for me for things to be precise and measured yeno... im basically just OCD'ing hiss process, ignore me

@johndoe1765 7 жыл бұрын

THAT IS ONE SERIOUS VICE ,MAN YOU KNOW YOUR STUFF GREAT VIDEO AND THANKS FOR THE MOTIVATION ALONE.

@craftlingsworkshop 7 жыл бұрын

your videos are very inspiring! awesome camera quality! stay tuned! :)

@lakeschoolrestorationchann1567 7 жыл бұрын

Bad ass vise. You should sell the screw and threaded collar so us without a lathe can make a equally skookum vise.

@ruuman 7 жыл бұрын

Lake School Restoration Channel you can buy acme threaded bar and collars off the shelf, there not to pricey either

@nemaslobodnoime 7 жыл бұрын

Lake School Restoration Channel and put our dicks in a vise

@remige2006 7 жыл бұрын

Lake school....One easy way to get a screw and a nut with a square thread is to buy one where they sell scaffoldings. Such a huge screw is use to level each post of the scaffold. Around 35 $,,,,

@emeltea33 7 жыл бұрын

Or a screw jack, typically for trailers and usually thrown away with good guts. Working on one now... though not THIS beastly by any stretch.

@rubenf4102 6 жыл бұрын

AvE fans

@TJSWOODWORKINGSHOP 7 жыл бұрын

You the man my brother where is the Instruction book for all these Ideas and projects that you make, I want to buy a couple of them bro lol, Your awesome bro will you give me a shout-out for my channel dude I WILL LOVE IT COMING FROM YOU BRO THANKS :)

@C4H10N4O2 6 жыл бұрын

Bro

@PaawnHuuub 5 жыл бұрын

@@C4H10N4O2 bro