If you enjoyed this video, consider checking out my Patreon page. Lots of perks, early access to my videos and no ads! Thanks!
@ColinBarling6 жыл бұрын
No adds on here ether if u no how to use a computer
@wrongfullyaccused7139Ай бұрын
No link in the description.
@dpmakestuff8 жыл бұрын
More details in the description. Subscribe here and follow me on Instagram! Links for everything in the description
@JohnHeisz8 жыл бұрын
Nice project Dustin and a pair of handy, good looking clamps :)
@jbirkins5 жыл бұрын
If that's what it'll take, I'm good with paying $11 at Harbor Freight.
@Jer_Schmidt8 жыл бұрын
Fantastic as usual! They look very useful.
@willemkossen8 жыл бұрын
Thats actually a lot more work than i expected. Great result!
@mmd19578 жыл бұрын
Very nice! I intend to make a pair just like these, thanks for posting. Mike from UK
@PPMOCRG8 жыл бұрын
Those are the prettiest clamps that I have ever seen!
@geraldgilling14688 жыл бұрын
Good and very useful project with an excellent video format.
@gaz7817 жыл бұрын
I've watched literally hours of your videos. this is the only one that I've seen a plan while you were working. good job as usual.
@dpmakestuff7 жыл бұрын
Yeah I had to simplify the plans that came with the clamp hardware. Thanks for watching!
@richjones543219 күн бұрын
It must be lovely to have every tool in the world. In Europe we buck up & use what we have. You are a very spoilt man
@dpmakestuff19 күн бұрын
@@richjones5432 what a cunty comment.
@richjones543219 күн бұрын
Get a life
@bigredracingdog4667 ай бұрын
If you're coming to this video just now, there is an excellent reason to purchase a kit over buying a ready-made clamp. See these videos: "First improvements ever to this 122 year old tool" by Taylor Toolworks And: "Must see way to Modify woodworking clamps!" by Stumpy Nubs You can use some of the techniques Dustin uses in this excellent video as well as those Mike Taylor uses in his.
@TheRealElDiablo8 жыл бұрын
Lol damn straight Deez nuts. Oil Bofa Deez nuts! that was awesome Dustin! Clamps turned out great to.
@richardshort4587 Жыл бұрын
Save the glue ups and purchase square staircase oak balustrades or spindles whichever you know them buy.
@deapthynka18 жыл бұрын
That was awesome. More complex than I expected
@brucenovotny59244 жыл бұрын
Very nice indeed. But for a person with just a couple of regular hand tools it's probably easier & cheaper to just buy the clamps... 🙂👍🇨🇦
@Ford33coupe8 жыл бұрын
That was fun to watch. Very good presentation!
@Brianbri-nq3cc2 ай бұрын
Simply outstanding👍👍👍👍👍
@laurakampf8 жыл бұрын
very nice edit!!
@CarlosGlatzos9768 жыл бұрын
They are beautiful, GOTO TO-DO-LIST. Cheers!
@dpmakestuff8 жыл бұрын
Thanks!
@warchitect737 жыл бұрын
What did you finish them with?
@craigmonteforte14782 жыл бұрын
Very nice !
@Simplecove8 жыл бұрын
Awesome video, Dustin! These are on my to-do list now...
@AwesomeWoodThings8 жыл бұрын
+SimpleCove They're on my to-do list too... albeit very far down the list. :-)
@zackjohnson44526 жыл бұрын
@David Shaper Here's a huge collection of woodworking plans: WoodSun. xyz
@alfantebeite86598 жыл бұрын
Very good!!! Congratulations!!!
@mihumus8 жыл бұрын
Really nice clamps, Dustin.
@matt_williams10158 жыл бұрын
Nice looking clamps!
@destitute84935 жыл бұрын
Left hand all thread rods and cross dowels are available in bulk. A motivated person could make a lot of those clamps.
@dpmakestuff5 жыл бұрын
Destitute step one: find motivated person.
@richardebbole18 жыл бұрын
terrific, as usual
@MakeitExtreme8 жыл бұрын
This is cool friend!
@fdc3138 жыл бұрын
Nice build, I love my Rockler clamp
@solidoak96128 жыл бұрын
Great work. Thanks for video!
@peterlorbeer96478 жыл бұрын
The clamps look very nice :O)
@jaxxbrat26347 жыл бұрын
Rock Maple flooring strips make good clamp material
@jaxxbrat26347 жыл бұрын
Sweet..classic design too
@dpmakestuff7 жыл бұрын
Thanks!
@user-is8el1cv6s8 жыл бұрын
Very very good!
@LeosTueftelei6 жыл бұрын
Excellent work ! 👍
@SubtlyAggressive6 жыл бұрын
Love the Brain It On theme ;)
@antonnovotny68738 жыл бұрын
Hello Dustin!It´s a very nice Work!
@ludwigbarnes30588 жыл бұрын
Did I see some new tools in your workshop? At first, I was wondering why you would make your own clamps. About midway through, I'm def putting these on my winter project list. The look great!
@dpmakestuff8 жыл бұрын
+Ludwig Barnes Maybe, what did you see? Thanks for watching!
@ludwigbarnes30588 жыл бұрын
+Dustin Penner A Jointer and Band saw. Those are two items I hope to get for my work shop next year.
@dpmakestuff8 жыл бұрын
+Ludwig Barnes No i've had the jointer and bandsaw for a while. I thought maybe you spotted an X-Carve in the background.
@ludwigbarnes30588 жыл бұрын
+Dustin Penner Watched it a 3rd time and on my Mac. Still missed it. Looking forward to you making good use of it!
@dpmakestuff8 жыл бұрын
+Ludwig Barnes Sorry, I wasn't sure if it made it in there or not. My next video will definitely have the X-Carve in the spotlight, and it's a good one. Possibly my favorite video so far.
@INHELL48 жыл бұрын
Really cool videos Dustin, but it would be better if you explain what doing and tips,thanks.
@ZHFabrications8 жыл бұрын
Awesome!
@kaoshavoc8 жыл бұрын
You had me at "Deez nuts." Subscribed!
@rondonnelly2 жыл бұрын
What angle did you tilt the drill press table to when drilling the secondary holes?
@tpobrienjr8 жыл бұрын
Very nice project.
@bomaite18 жыл бұрын
Just an idea, but as long as you are laminating, why not cut the slots for the threaded rod with your table saw before you glue up? Drilling angled holes and all that chiseling is really only necessary in solid stock. Slots will be square ended and will not taper in to the nut, but I don't see any disadvantage in that.
@dpmakestuff8 жыл бұрын
+bomaite1 Yeah that's a good idea. Thanks!
@slug1826 жыл бұрын
1:47 now to make this clamp glue these woods using these clamps.. I dont have clamps man Hahaha
@jubilantyogurt5 жыл бұрын
Number of tools used that no regular home owner owns: 9000
@dpmakestuff5 жыл бұрын
killertoast no. Also don’t use the tools I used, use whatever tools you have. If you’re trying to making your own clamps I’m guessing you have a few tools already.
@abelnieto432ify8 жыл бұрын
Very Impressive!
@Curmudgeonhero7 жыл бұрын
Nice build!
@borishruskar51088 жыл бұрын
Beautiful and useful
@robertkutz8 жыл бұрын
dustin nice work .
@davidmeyer92042 жыл бұрын
Sorry I am late to the party. Nice build and video, as always!
@politovski2000 Жыл бұрын
Excelente !!!!
@markeagles73836 жыл бұрын
Cool, thinking about the clamp lately.
@bambambundy68 жыл бұрын
That was an awesome video!
@MichaelLawing8 жыл бұрын
Saw the teaser on IG. These look awesome!
@dpmakestuff8 жыл бұрын
+Michael Lawing I do my best to keep my Instagram follows in the loop! Thanks for watching.
@sigung018 жыл бұрын
Really nice!
@waynecreech8 жыл бұрын
pretty cool !
@iDeviceChgr8 жыл бұрын
Turned out nice bro! 👍🏼
@dpmakestuff8 жыл бұрын
+Nick Henderson Thanks!
@baron81038 жыл бұрын
ESAS PRENSAS LAS COMPRO MI PADRE CUANDO TRABAJABA EN EL TALLER DE CARPINTERIA DE LA OFICINA PEDRO DE VALDIVIA SIENDO LA DISTANCIA DE 160 KILOMETROS DE ANTOFAGASTA-CHILE. CLARO Q' SON DE MADERA SOLIDA Y FABRICADAS EN U.S.A. SON UNA HERENCIA DE LA FAMILIA Y LAS OCUPO MUCHO ME SACAN DE UN MONTON DE APUROS...
@honkynel3 жыл бұрын
brilliant vid. Reminds me of Vision On....
@makedonce258 жыл бұрын
Lol make it :) Brother i will need whole wood working factory tools for this project
@Tom-lr5ug8 жыл бұрын
And trained help........lol
@goonboi72925 жыл бұрын
zlaten zlate you can do this with a hand saw and a drill with a guide block, and honestly with a knife instead of chisels. To be completely honest, you don’t even need a guide block, just a hand held drill, the holes don’t need exact precision.
@mbrails8 жыл бұрын
Ok you did a great job, but I have to point out something that I have learned; you can get hand screws all day long at Harbor Freight for between $8 and $11. The quality is great and in fact far better than the premade Jorgensen hand screws I have. I have about 30 of them. But like I started with you did a great job.
@dpmakestuff8 жыл бұрын
I live in Canada. No HF here.
@GregsGarage8 жыл бұрын
Sweet! You can never have enough clamps.
@Scrivscribe8 жыл бұрын
so clever dude! 😊
@RHill-rv1ij6 жыл бұрын
Love This Video
@citoman078 жыл бұрын
Amazing, thank you.
@coxsj8 жыл бұрын
Nice one!
@buckmetta8 жыл бұрын
very nice job sir - an usefull pieces in many situations
@dpmakestuff8 жыл бұрын
Thanks!
@haroldshinski79226 жыл бұрын
You go so fast , you should make them to sell !😂😂😂
@nabilabedrabo81816 жыл бұрын
just perfect thank u
@Zioluideecreative3 жыл бұрын
bravo !!
@adamquincey43718 жыл бұрын
Excellent... Great job... Cheers...
@VaneyRio6 жыл бұрын
Look at all the advanced tools I need to make a basic tool... Especially clamps to make clamps
@dpmakestuff6 жыл бұрын
Vaney Rio yea... using tools to make other tools... unheard of.
@VaneyRio6 жыл бұрын
Dustin Penner Sorry if it came out as an offensive comment, did not mean to. I would definitely kill for a shop like that.
@bigredracingdog4667 ай бұрын
These can also be made just using hand tools just as they were a century ago.
@danaikankaew84978 жыл бұрын
สวยงามมากครับ สุดยอด😄
@thomasharder95823 жыл бұрын
Looks like the holes are reamed open at about 15 degrees on either side of the primary shaft opening. Is that about right?
@robertbrunston54068 жыл бұрын
Nice clamps.
@dpmakestuff8 жыл бұрын
Thanks!
@RedneckRythem8 жыл бұрын
Nice work. But some of us don't have all those tools handy.
@dpmakestuff8 жыл бұрын
A drill and a tablessaw?
@jimcarey91077 жыл бұрын
banjo tuners the best
@AlbosNoggins8 жыл бұрын
Absolutely beautiful clamps Dustin, thanks for sharing. Did you have any issues with jointing the Baltic Birch plywood? Did it leave any marks on the blades?
@dpmakestuff8 жыл бұрын
+Alex Howard You're the second person to bring that up. It left no marks on the blades and they're just as sharp as ever. In my limited research, it looks like you don't have to worry about carbide blades and plywood. Thanks!
@SebastiaanMollema7 жыл бұрын
Hi dustin, cool clamps! I wondered for a while how these type clamps are made.
@dpmakestuff7 жыл бұрын
Thank you!
@neilmair84536 жыл бұрын
Great video, but you can you tell me why the holes for the thread need to be elongated like that. As you can probably tell I've never used these so have no clue. Thanks
@dpmakestuff6 жыл бұрын
Neil Mair thanks. The two pieces of the clamps are never parallel to each other. The elongated holes allow it to rack and twist without binding.
@arfonia8 жыл бұрын
Nice clamps but how many hours did it take to make them?.....and would you say they would be better than just using any other clamp.
@dpmakestuff8 жыл бұрын
+arfonia I'd say they function 27% better than store bought.
@Tangooman8 жыл бұрын
Bel viedeo, bravo !!
@a.v.22425 жыл бұрын
Хорошая работа! Подробно, познавательно. Но, к сожалению, стоимость струбцин с учетом оборудования и оснастки приближается к 500$ за единицу.
@kennethjohnson91698 жыл бұрын
Dustin, If I don't want to use plywood for clamps what would be the best wood? I don't want it so soft that the project mars the clamps yet I also don't want the clamps marring the project. Also, you probably have answered this a million times, what it the paste you rub on your projects?
@dpmakestuff8 жыл бұрын
+Kenneth Johnson I've answered the finish question so many times I made a video about it and post a link to that video in the description anytime I use it in a project video. As far as wood goes, there is no perfect solution. If you're concerned about damaging your project, use soft would cauls or sacrificial pieces in between clamps. You'll want the clamps to be as strong as possible so I would recommend any straight grain hardwood.
@Bobby936368 жыл бұрын
Do you always wax your nuts? Lol. Thank you for sharing. Awesome vids. Subbed.
@dpmakestuff8 жыл бұрын
+Bobby93636 I never miss a chance!! Thanks for the support!
@scottjones50138 жыл бұрын
Best dyi clamp I've seen yet. Where did u get hardwhear
@dpmakestuff8 жыл бұрын
+Scott Jones Thanks! All details are in the video description.
@The.Home.Cinema.Engineer7 жыл бұрын
Awesome but what if you dont have any wood working machines to build it in the first place?
@dpmakestuff7 жыл бұрын
C815richard they you probably don't need woodworking clamps. Or you could buy some.
@arawtgabi2 жыл бұрын
Nice but other than the table saw, I have nothing else.
@dpmakestuff2 жыл бұрын
Cool. You won’t need clamps then.
@nathangold97758 жыл бұрын
It's cheaper to buy some clamps than the kit you used to make them.
@dpmakestuff8 жыл бұрын
Not if I make a video on building them and get paid for it...
@andreichindris19348 жыл бұрын
+Dustin Penner Best answer!
@igorschtolts59227 жыл бұрын
good work
@dpmakestuff7 жыл бұрын
Thanks very much!
@michaelbillups37067 жыл бұрын
I think you need to switch to De-caf, you are going to hurt yourself working that fast;) Nice Video, well shot and edited. Quick and to the point.
@dpmakestuff7 жыл бұрын
haha! Thanks!
@mcorrade6 жыл бұрын
this is great! Unfortunately I can't find the kits anywhere. There currently unavailable on Amazon
@TheAshanks156 жыл бұрын
mcorrade the kits cost as much as just buying the clamps. Check out rockler it even harbor freight. This is a cool build that was fun to watch and he did a good job. But if you need clamps it's just as easy to buy them already made.
@waynek8486 жыл бұрын
Those are great! Is that hardware in a kit? If so where did you get them?
@berniesr8 жыл бұрын
Great project sadly the kits aren't available in Australia
@dpmakestuff8 жыл бұрын
+Bernie Stefan-Rasmus Ahh that's too bad. I'm sure if you do some digging you could track a kit down. Lots of them out there.
@Patricksworkshop8 жыл бұрын
Nice
@AlbertoAdolfo8 жыл бұрын
Thank you for this one, though I admit I'd subscribe if you gave measurements in mm or cms. or any measurements at all.
@dpmakestuff8 жыл бұрын
+Alberto Adolfo All the measurements are included with the kits.
@jvmiller19957 жыл бұрын
does the glue in the plywood not chip your planer and jointer blades? Unless you have the spiral inserts most the time straight high speed steel bladeswill chip when plywood is passed on its edge. Oh yeah good looking clamps with that plywood like that they will never give.
@dpmakestuff7 жыл бұрын
Jeremy Miller I've heard rumors about that but let's be realistic. Show me a glue that is harder than carbide. I've thickness planed plywood before and never seen any indication of dulling, let alone chipping. I haven't rotated the cutters on my machine since this video and it's still making beautiful cuts. Thanks!