Make Mesh Logo Design In Illustrator (2 LOGOS) - Illustrator Logo Tutorial
Рет қаралды 167,182
6 жыл бұрынLearn how to design 2 LOGO designs in Illustrator using the ‘make mesh’ function. In this tutorial I walk you through how to use the make mesh Illustrator function to make two different and neat logo designs.
It’s Tom with Satori Graphics back with another graphic design Illustrator tutorial. Today I have a tutorial on the make mesh function in Adobe Illustrator, and I use my creative streak to showcase two different logo designs that I created using that very same function.
The make mesh function is really neat indeed, and it doesn’t only have to be used for logo design, it can be used on a wide range of graphics and graphic design projects. But, after you watch todays tutorial in Adobe Illustrator, you will be able to use the make mesh function, and confidently use it on any of your graphic design projects.
If you found this graphic design upload on the make mesh function for logo designs in Illustrator enjoyable or useful, let me know in the comments section and drop a like on your way out. Subscribe to stay updated to all of my uploads and until next time, design your future today, peace
SATORI MERCCHHH!! 👌👌👌
teespring.com/stores/satori-g...
CHECK OUT MY GRAPHIC DESIGN DIGITAL DOWNLOADS:
➤➤ www.satorigraphics.net/typogr...
Grab Quality Video & Audio Equipment!
➤➤ bit.ly/2FyAEpH
**************** SUBSCRIBE TO SATORI GRAPHICS ****************
➤➤ / @satorigraphics
My most recent graphic design tutorial:
• Logo Design With A CLI...
Check out this playlist on logo design tutorials:
• LOGO DESIGNING WITH IL...
**************** MUSIC ****************
Lowrider by Joakim Karud, check his music out here
/ va
Enjoy by Joakim Karud, check his music out here
/ va
**************** SOCIAL NETWORKS ****************
➤ TWITTER: / satorigraphic2k
➤ INSTAGRAM: / satori_graphics
➤ PINTEREST: / satorigraphics
▶ Copyright
The work is protected by copyright. This is applied to the video recording of itself as well as all artistic aspects including special protection on the final outcome. Legal steps will have to be taken if copyright is breeched. Music is used from the KZfaq audio library and thus copyright free music.
• Make Mesh Logo Design ...
@StephenRCar 3 жыл бұрын
Have played with interference patterns in Illustrator for years. Never checked out the mesh function but this is something I'm going to take a close look at. Thanks - keep up your great work.
@minhhoangnguyen427 5 жыл бұрын
It is not about how you make it, it is about how you make people feel much more creation same like this. I learn a lot from your video, just keep live it up !
@tufianpejredd 5 жыл бұрын
Good day Satori! Thank you so much for sharing knowledge about graphic design. I just won a contest at 99designs with quite a large prize by following this mesh tutorial and studying it. Once again, thank you! and have a great day ahead :)
@binkuta1537 3 жыл бұрын
Started to watch some of your vids. Awesome tutorials. Simple and VERY detailed. Keep it up
@jaseylove 6 жыл бұрын
Thanks Tom, loved this effect - haven't really used the make mesh tool before.
@SatoriGraphics 6 жыл бұрын
Hey there! Thanks for the feedback and glad you enjoyed the video, have fun with the technique!
@SatoriGraphics 6 жыл бұрын
Today not just one logo design, but two logo designs using the same function in Adobe Illustrator, enjoy!
@fimikhkh3655 5 жыл бұрын
Thanks, thanks again
@SatoriGraphics 6 жыл бұрын
🔥 Check the description for links to resources and digital downloads, as well as Satori Merch! 👌
@quyenblack 2 жыл бұрын
thank you so much. Your tutorial helped me alot in an architectural artwork
@ecoglo6205 5 жыл бұрын
Really helpful, thanks so much for the video!
@shakilkazi7707 4 жыл бұрын
Thanks a lot for beautiful idea... Appreciate... Too much.... Wonderful work
@hansk300 6 жыл бұрын
This is really a terrific way to design a logo!! Thanks for showing.
@SatoriGraphics 6 жыл бұрын
Thanks a lot for the comment Hans, and have a great day
@jayunclejujustpaul5412 3 жыл бұрын
I know this is an older video but I had to thank you for everything you do brudda. Been going through quite a lot of your videos and has really helped inspire me. Keep them coming.
@SatoriGraphics 3 жыл бұрын
hey I still see comments, thanks for this message and have a great day!
@BernardWilliams 6 жыл бұрын
Wow, what a cool logo design using the mesh tool. I may have to just give this one a go. Thanks as always sir.
@SatoriGraphics 6 жыл бұрын
Of course, the whole point is to inspire you all to go and try this out for yourself :) Have fun with it and have a great day Sir
@thecreativebeast6732 5 жыл бұрын
Man hats off to you!! i am learning a lot of things from this channel, keep up the good work, love this channel 😀😀😍😍
@SatoriGraphics 5 жыл бұрын
That is awesome, keep creating Creative Beast!
@jasonbye338 6 жыл бұрын
Great tutorials Satori, you have a great way of teaching....
@SatoriGraphics 6 жыл бұрын
I try my best and do what I think works. So the fact you think that about my videos is awesome
@maximusdoomed 5 жыл бұрын
If Ive said it once; Ive said it more than a thousand times....POOF! He's Done it Again! Fabulous info! Crap, flunked that test too.
@rafmolmo 6 жыл бұрын
I love that kind of logo. Thank you for that.
@SatoriGraphics 6 жыл бұрын
Great to hear that Rafael!
@najda9237 6 жыл бұрын
thank you so much In past , I was trying to make a clipping mask for a word but it was refuses but today after I tried compounding path , it worked :D
@SatoriGraphics 6 жыл бұрын
yeah the compound path is essential as part of the process for a clipping mask in Ai. Thanks for the comment! :D
@ahmedalhashar 6 жыл бұрын
I learn from most of your videos. Keep up the good work. 👍
@SatoriGraphics 6 жыл бұрын
Thanks Ahmed, that means a lot to me because I do want to help other designers. So thanks :)
@ArlenePerezCintron 5 жыл бұрын
Satori, your tutorials are the best!
@SatoriGraphics 5 жыл бұрын
Thanks for the kind words Alrene, and have a peaceful weekend 👍
@Squid052011 6 жыл бұрын
Another great video Satori! I've learned a lot since I subscribe on your channel. Thank you!
@SatoriGraphics 6 жыл бұрын
Thank you very much Dave, have a great day!
@bananatsuki9450 6 жыл бұрын
This is so cool. Thanks man got new ideas because of your videos!😁
@SatoriGraphics 6 жыл бұрын
That is the main thing for me, inspiring and intriguing other designers to make something cool :)
@JoeBodego 6 жыл бұрын
You can also add color, gradient and even live edit the mesh by going into isolation mode
@apikdesigns878 4 жыл бұрын
also you can change line width right there.
@janus1450 6 жыл бұрын
Toujours le meilleur Tom // Always the best Tom ;) Thank you !
@SatoriGraphics 6 жыл бұрын
Hitting me with the French lingo! I appreciate it lol :P
@maxehrlich 5 жыл бұрын
Thanks Tom, this has lots of possibilities!
@SatoriGraphics 5 жыл бұрын
It sure does Max, thanks and have a great weekend man
@adhilarshath2111 6 жыл бұрын
Very useful to listen.. U make it simple and powerful thank you so much
@SatoriGraphics 6 жыл бұрын
Cheers Adhil, I try and make my content as simple and easy to engage with as possible 👍
@krshnonkyle 6 жыл бұрын
This is soooo cooooool! I'll try thissss. Thank you Tom
@SatoriGraphics 6 жыл бұрын
Cheer buddy, and yes please do try it, that is the basic point of the video! Enjoy and have fun 👍
@chanoc455 6 жыл бұрын
This is a great new design mode…thanks!
@SatoriGraphics 6 жыл бұрын
Cheers for the comment Juan
@alvaroleal8868 4 жыл бұрын
I am going to following you from today. Really cool tutorial. Thanks for your video.
@SatoriGraphics 4 жыл бұрын
Hey thanks for the follow and hope you have a great day
@jemellesalazar5457 3 жыл бұрын
I really enjoy watching your tutorials! The way you teach and explain is easy to follow. This is helpful especially to beginners like me! Thank you so much!
@SatoriGraphics 3 жыл бұрын
Hey I'm really glad to hear that Jemelle, have a great day :)
@jemellesalazar5457 3 жыл бұрын
@@SatoriGraphics 😍😍😍😍😍
@spadeartinc 6 жыл бұрын
Love it Creative and genius
@SatoriGraphics 6 жыл бұрын
Thanks a lot bro! Glad you enjoyed the video man :)
@YudaYudiarto 5 жыл бұрын
Thanks for tutorials
@hollowsoul666 6 жыл бұрын
great video thanks will definitely experiment with this !
@SatoriGraphics 6 жыл бұрын
That's awesome to hear! Glad that I have inspired :)
@joshuaatkins961 4 жыл бұрын
Really good tutorial!
@dogmeh1 5 жыл бұрын
ty ty ty ty I love your videos
@salvadorhipolito 6 жыл бұрын
Great tutorial brother!!!! Thanks
@SatoriGraphics 6 жыл бұрын
Thanks a lot Salvador! Have a great day
@JWMCMLXXX Жыл бұрын
Stick with it man. 4 years from now you'll have over a million subs
@SatoriGraphics Жыл бұрын
lol :P
@inayathkhan100 6 жыл бұрын
Awesome tutorial HATs Off !
@SatoriGraphics 6 жыл бұрын
haha no hats off! :P Thanks for the feedback 👌
@soundoftheatom 6 жыл бұрын
Awesome as usual. 👏🏻👏🏻👏🏻
@SatoriGraphics 6 жыл бұрын
Thanks a bunch Mark, really dig the feedback on my content
@madnad9634 6 жыл бұрын
love this!!
@SatoriGraphics 6 жыл бұрын
Yeah this logo tutorial went really well I thought, thanks!
@annas3233 4 жыл бұрын
Makasih bro, videonya sangat membantu :)
@mohdazim9977 3 жыл бұрын
Awesome tutorial
@sumonkhan-xl5ds 4 жыл бұрын
awesome work..sir
@ahmadhamdan9496 5 жыл бұрын
You are great man
@wasuthemind 5 жыл бұрын
tried it it's goood
@esaumit 6 жыл бұрын
thanks.... nice tutorials....
@SatoriGraphics 6 жыл бұрын
appreciate the feedback bro
@korbendallas3210 5 жыл бұрын
Great 👍🏻 thanks
@anika6558 6 жыл бұрын
grestest task of you nice and nice video
@SatoriGraphics 6 жыл бұрын
Thanks again Muku!
@ABeloved 5 жыл бұрын
Awesome video..thank you are helping me alot.. God Bless
@SatoriGraphics 5 жыл бұрын
hey that is awesome to read Aquana, thanks a lot :D
@ABeloved 5 жыл бұрын
@@SatoriGraphics I very sry to both you again but have a request can you do a video on what type of computer or laptop to use for the abode applications..I have an old laptop and due for an upgrade but being new the graphics on the computer I want to get a good computer to do the work you show. Like I said by watching your videos I'm teaching myself to do the logos myself. I like the tips you share which really help me. Pen tool is the hardest for me right now but I'm getting it. Thanks again..
@kaldarges 6 жыл бұрын
Awesome bro.. 😊👏
@SatoriGraphics 6 жыл бұрын
Thanks man, as always! One of my 'regular' viewers and engagers to my content. I know all my regulars well by now :)
@brendangoodenough173 5 жыл бұрын
Very nice, well done..
@SatoriGraphics 5 жыл бұрын
Cheers Brendan
@Michael-qp9yr 5 жыл бұрын
Very cool
@nicolehermans4642 5 жыл бұрын
Hello, thanks for the fine titorial but I've got a question.after finishing this tutorial the lines in my logo were hardly visible. I don't know what's the reason for it
@shahadomar4120 3 жыл бұрын
Thank you ❤️❤️
@SatoriGraphics 3 жыл бұрын
No problem Shahad :)
@salim0187 6 жыл бұрын
You are the best
@SatoriGraphics 6 жыл бұрын
haha thanks man, I'm not BUT I do try :P
@murillomoura4804 6 жыл бұрын
NICE!
@SatoriGraphics 6 жыл бұрын
✌👍👌
@umairuiux 6 жыл бұрын
Nice video tom
@SatoriGraphics 6 жыл бұрын
Thanks a lot Hunter! I assume that is your name lol, probably isn't :/
@adedoyinbetiku 5 жыл бұрын
Thanks Bro
@SatoriGraphics 5 жыл бұрын
No probs man, glad to see you enjoyed it
@sheikhmuhammadadnan3 6 жыл бұрын
VERY NICE
@SatoriGraphics 6 жыл бұрын
Thanks man! Have a great weekend 👍
@zhuruprinting9510 5 жыл бұрын
awesome
@SatoriGraphics 5 жыл бұрын
Thanks a lot!
@MarkoKozlica 5 жыл бұрын
Great and interesting tutorial. One question though, the letters in my final phase have the outline color around the shape, but in your case they do not. Any help with where I am doing it wrong? :(
@SatoriGraphics 5 жыл бұрын
Hey thanks! Is there any chance you can take a screen capture and upload it to the internet, so I can see your problem properly?
@nazrul3646 5 жыл бұрын
Nice
@HyperActive94 4 жыл бұрын
Thnx for the greta tut man. i have a little problem when im trying yo move the mesh points the area around the point is painting in black color. any solution for me? TIA
@ahmadhamdan9496 5 жыл бұрын
If I want to make clipping mask for final design, is it possible? Which means I want to make a background for logo with mesh.
@samehamer. 4 жыл бұрын
Cool
@fahadnawazkhan44 4 жыл бұрын
Hi tom. I'm having ossue with it help me out. When i click on crop. The command shows, " the filter produced no results. Please select two filled and overlaping paths. Where im doing mistake sir?
@mohammedshabbir699 4 жыл бұрын
I would like to know why make it a compound path? Also why use Pathfinder > Crop?
@pratikkarmakar321 5 жыл бұрын
Hi, thanks for the tutorial. How did u create the gradient mesh background in 2nd logo
@herbertwanzala6409 6 жыл бұрын
cool
@SatoriGraphics 6 жыл бұрын
✌👍👌
@machikomacine6810 3 жыл бұрын
I am just considering why we need to use outline stroke to do, we can even use the normal stroke and then make with mesh ??
@Fongy99 5 жыл бұрын
Is there any reason to make the text a compound path as opposed to just making it an object?
@duatiga4062 4 жыл бұрын
i can't crop the object after make clipping mask. what should i do? please help me :)
@MrJoesafc 4 жыл бұрын
How can I add a gradient to the pattern itself before putting the letter if I don’t want to use the letters and just the pattern?
@neetizen5692 5 жыл бұрын
my eye really feels kaleidoscope
@lirimhasani611 6 жыл бұрын
Can you make a logo process from sketch and to presentation please?
@SatoriGraphics 6 жыл бұрын
I kind of have done that already, it was a little while ago and wasn't my best work. But if you search 'satori graphics logo process start to finish' you should find it in KZfaq :)
@krystallord7828 5 жыл бұрын
Hello Tom great video and amazing technique, but I have a little issue, the mesh becomes black when I move the anchor points I guess the lines overlap, is that an issue of the lines thickness or Im missing something, thanks in advance
@seanweik 4 жыл бұрын
i have the same problem.. were you able to fix it?
@aijunwang6937 3 жыл бұрын
turn off the color filling
@ExplosiveGangGermany Жыл бұрын
@@aijunwang6937 Thank you man was really helpful! Guys just turn off the color filling in the beginning of the project
@tebogompolokeng3663 4 жыл бұрын
Yo man. thanks for the tutorial but i keep coming across a probles in my attempts. every time i mesh my lines downwards, a hole opens up. and then when i move the lines the whole object comes out eith that hole. what do i need to do to stop this from happening?
@muhammadiqbaldananjaya7614 3 жыл бұрын
same here
@kaldarges 6 жыл бұрын
Happy afternoon brother 😊💐
@SatoriGraphics 6 жыл бұрын
Thank you bro, and a happy Afternoon / Evening to you too! First comment gets the PIN! Congrats 💥🍾🍻
@kaldarges 6 жыл бұрын
Satori Graphics what's that ''first comment gets the pin'' bro?🤔
@SatoriGraphics 6 жыл бұрын
On my channel, I aware the heart / pin to the first comment on each video. It means the comment is set at the top of the list
@Jackyguknowme 2 жыл бұрын
Hey. I am getting a white background between the lines that are manipulated
@nadunpulathisi7463 6 жыл бұрын
✌✌💕
@SatoriGraphics 6 жыл бұрын
👌👍😀
@DatCookies 5 жыл бұрын
size?
@Skyehiii 4 жыл бұрын
when i warp downwards it just makes the lines on the point im moving dissapear
@sanwoolutolu4123 4 жыл бұрын
Just before you create mesh, make sure your fill is set to none
@Sneakysquid3553 4 жыл бұрын
@@sanwoolutolu4123 Can you explain better please?
@sanwoolutolu4123 4 жыл бұрын
Make your fill transparent before creating mesh
@Sneakysquid3553 4 жыл бұрын
Sanwoolu Tolu Thank you !!!
@aijunwang6937 3 жыл бұрын
I met a problem, clipping mask didn't work, every time I chose it, it went blank.
@dariusdevonking Жыл бұрын
I tried this and I keep getting huge black spots on the screen how do i fix that
@dragonlad228 5 жыл бұрын
The make mesh tool is getting white patches when I try to move it around. What am I doing wrong?
@SatoriGraphics 5 жыл бұрын
That isn't something I am aware of, can you screen capture it and then upload it to an image sharing site to link here?
@sakinahhamid9196 5 жыл бұрын
@@SatoriGraphics I also encounter the same problem. Here's my screen capture imgur.com/gi15Htj
@dragonlad228 5 жыл бұрын
Same as Sakinah's problem
@SatoriGraphics 5 жыл бұрын
@@sakinahhamid9196 sorry for the late reply, it's difficult to track comments on old videos. I haven't experienced this issue, but I feel it may be due to you having the GPU setting activated. Try going up into the preferences and then disable the GPU if you have it switched on. As of now, this is the only solution I can think of, but I'll ponder it some more
@dragonlad228 5 жыл бұрын
@@SatoriGraphics That did'nt work for me :( But I'll keep looking around as well.
@youyoutian4544 4 жыл бұрын
我在制作的时候遇到了一个问题，在我移动了网格中的某个锚点以后会出现一片空白，但是向反方向移动则没有这个问题，应该怎么解决呢？
@aijunwang6937 3 жыл бұрын
线条不要填充
@samknight6710 3 жыл бұрын
could this same process work with text?
@SatoriGraphics 3 жыл бұрын
It sure can, if you outline the text or turn it into a compound path first
@diegodecamino5463 6 жыл бұрын
Satori, when I move the mesh´s handles after the envelope distort , an irregular black hole is made instead of the wanted distorsion. Im sure its something about my illustrator´s settings but not sure exactly it is, do you have any clue?? Thanks!
@SatoriGraphics 6 жыл бұрын
Can you please take a screen capture of the problem, and then upload it to an image sharing site and post the link?
@diegodecamino5463 6 жыл бұрын
ibb.co/hjLf8o
@diegodecamino5463 6 жыл бұрын
As you can see, when I moved the handles to make the distorsion, a kind of black hole is made on the grid.
@carlgalang659 6 жыл бұрын
I have the same exact problem sir 😓
@annasmejkalova1481 6 жыл бұрын
So do I :D imgur.com/a/6FNJTQa what's wrong ?
@IMVN_YTB 2 жыл бұрын
I did exactly the same but it won't work out
@diegodecamino5463 6 жыл бұрын
Satori, when I move the mesh´s handles after the envelope distort , an irregular black hole is made instead of the wanted distorsion. Im sure its something about my illustrator´s settings but not sure exactly it is, do you have any clue?? Thanks A pic of my problem! imgur.com/a/6FNJTQa
@SatoriGraphics 6 жыл бұрын
hey man Really sorry but I have never experienced this issue before Are you sure there are no objects below the mesh?
@sanwoolutolu4123 4 жыл бұрын
Just before you create mesh, make sure your fill is set to none
@chino281 2 жыл бұрын
bro when i cropped it this shit appears the filter produced no results please select 2 overlapping paths
@MrMindandMatter 5 жыл бұрын
I still have no idea the benefit of turning the shape into a compound path....? I have researched a lot into compound paths and shapes and struggle to see why you use it so much in your videos, seems like it adds no value... please correct me if I am wrong, I am dying to know
@maximehedouin7140 4 жыл бұрын
Compound path is mostly used to work in an non destrutive way, so that you can edit your shape after you applied for exemple a gradient.
@abhinandandey_ricky 4 жыл бұрын
In many if your videos you have suggested not to use gradient in logos..
@xaride7201 4 жыл бұрын
Fun fact, if you quick scroll through the videos, this one's miniature will look like it's glowing lol
@hj-zm1wo 5 жыл бұрын
All those lines made me dizzy @ 1:26
@stevenwilson5556 Жыл бұрын
Clearly needs some work to get it right, my first attempt was a bit clunky. Mesh is a bit fiddly but it definitely has some promise.
@diegodecamino5463 6 жыл бұрын
Please Satory help us out! the comment below!
@RenLemon 5 жыл бұрын
I'm going insane! control D stopped working to duplicate line fast. What the heck! Also every time i try and crop after making it an object it gives me this error: "the filter produced has no results. Please select two filled and overlapping paths" !!! I'm a noobbbb - help :( (also thank you for this tutorial.. but also ARGH! lol )
@RenLemon 5 жыл бұрын
@@SatoriGraphics Thank you so much for the reply :) I'll try those out!
@zhuruprinting9510 5 жыл бұрын
Box Design wanted
@JoeBodego 6 жыл бұрын
NO need to outline the font, hold down the alt/win-option, mac and select the "Intersect" icon on the Pathfinder. Again the font is still editable, outlining fonts should always be the last resort.
@SatoriGraphics 6 жыл бұрын
I think you've mentioned that function before but it slipped my mind. I need to write it down and wire that into my workflow, thanks
@JoeBodego 6 жыл бұрын
LOL! yeh i was surprise to see you're still outlining fonts. remember "NEVER if you dont have to"
Gadget CN
Рет қаралды 63 МЛН