Make the best American Wooden Flags

No video

Make the best American Wooden Flags

Рет қаралды 16,855

2 жыл бұрын

Today I show you how I make these badass torched Thin Green Line Wooden Military American Flags on my Avid PRO4848 CNC Router Table.
These make great gifts for that special US Veteran in your life.
More in depth talk about different polyurethanes:
• How to make a red line...
Please drop a comment below and let me know what you think of my process and how this flag turned out. Also don’t be shy and share some of your own tips and tricks.
IF you would like to purchase one of our flags, please visit our Etsy Store:
Buy Our Flags rngproducts.et...
Save 5% on Omtech Lasers Here: omtechlaser.com?sca_ref=2168062.nig9PO1Vw8
Discount Code: RNGPRODUCTS5OFF
Alternative Laser Options: (Highly Recommended)
AEON LASERS: aeonlaser.us/p...
Affordable Entry Level Option: ORTUR LASER
Save 3% ortur.net/?ref...
Save $10.00 with code: RNGPRODUCTS at checkout ortur.net/?ref...
If you would like to help support our channel please take a look at our Amazon Affiliate Store where you can find the exact products shown in my workshop.
Amazon Store:
Buy Products Seen in my Videos: amazon.com/sho...
**Have you ever wanted to own a CO2 laser and thought they were out of your expertise or even price range? I am proud to announce I am an official OMTech Brand Ambassador / Affiliate. If you purchase a laser using the link below I get a small commission. The pricing on the site is exactly the same. Shoot me a message or DM letting me know you are interested in a laser or you purchased one. Part of using my link is getting access to me so I can help you get your machine up and running. Check out these awesome lasers. Subscribe so you don’t miss all my new laser engraving content. Shop OMTech Lasers here:
omtechlaser.co...
Follow me on all Social Media:
TikTok: / rngproducts
Instagram: / rngproducts
Facebook: / rngproducts
Business Inquiries: rngproductsllc@gmail.com
Camera Gear I Use:
Main Camera: amzn.to/2MUegwn
Backup Camera: amzn.to/3trU7i0
GoPro: amzn.to/39MQawD
Shotgun Mic: amzn.to/36GMjzm
Slider: amzn.to/3oPMXkb
Lighting: amzn.to/3cGT086

Пікірлер: 45

@motogeekcomp6045 Жыл бұрын

Hey! Can you show us a video of how to use the CNC router?

@richardbaynes3862 Жыл бұрын

Great video! Suggestion - get an HVLP spray gun for finishing (much faster spraying and way more uniform in finish) - and finish your flag FLAT - don't do it standing up, way to much chance for drips and runs....I use General Finishes waterbased satin 450...been doing signs for 15 years on the CNC.

@derekpeterson5123 Жыл бұрын

Bad Ass job! Thank you for sharing your time and talent!!

@livinginhoustontx5671 2 жыл бұрын

Another awesome video! Thank you

@RISENGRINDWORKSHOP 2 жыл бұрын

Thank you Sir!

@xpoxydesignz5003 Жыл бұрын

Really like the approach and explanation of your possess. Thanks for your time sir.

@RISENGRINDWORKSHOP Жыл бұрын

Thank you! People either compliment the detail or complain I talk to much - Can't win LOL

@uvaldo9880 2 жыл бұрын

Great explanations and awesome video! Thank you

@RISENGRINDWORKSHOP 2 жыл бұрын

Glad you enjoyed it! Thanks for the comment!

@Casenundra Жыл бұрын

What I want to know is how do you package and ship the flag.

@Chazbridge 2 жыл бұрын

Pretty cool! I make my flags all by hand, aside from using stencils for my graphics and a dremel to carve them out…. so time consuming🥵 nice work!!

@RISENGRINDWORKSHOP 2 жыл бұрын

Much respect to my fellow hand made flag makers 😂 tons of work 👍🏼🍻

@Monkywings 4 ай бұрын

where do you get the wood blanks? And how thick is it?

@stephanielittlefair3914 8 ай бұрын

Hi Ryan , As a newby through your vids i have in vectric aspire sorted the majority of things - the one thing i need your help with is the tool you use for carving out your ARMY Logo - it never looks right when i do it

@rodkramer616 6 ай бұрын

what vee bit did you use for the army logo

@ralphalameda1381 Жыл бұрын

Nice work great looking flag. Liked how you explained the different polys. On the first project for a picture frame it was good until I placed the poly on and turned yellow I spent the next 2 hrs painting the letters and washing off the excess paint. What bits do you use when you cut the emblem and stars.

@RISENGRINDWORKSHOP Жыл бұрын

Either a 60 or 90 V-Bit and always make sure it's sharp and high quality! I love poly, minus the issues with coloring :)

@josegysgttress5696 2 жыл бұрын

Awesome work! Any advice for someone like me who is interested in learning more about this skill? Thank you

@RISENGRINDWORKSHOP 2 жыл бұрын

Yup, watch as many KZfaq videos as you can as well as joining FREE cnc groups on Facebook!

@alexandersmith2441 3 ай бұрын

Is that oil-based or water-based?

@bobshortland3079 Жыл бұрын

wow cool best wishes from england mate

@3187rakkasan 11 ай бұрын

Cool flag! Maybe consider making a video to show how to build the file. I was perusing youtube trying to find a video that shows me how to insert, for example, the army logo on the flag. Granted, I'm using a laser engraver, but dxf file should be a dxf file in the end.... I just don't know how to overlay the image that I want on the flag and have it visually fit, have a nice border around it and just looks like it belongs there. I know, I know...."there's so many different softwares, skill levels, etc.. out there". If you know how to use a couple different programs then make a couple different videos (that's more clicks and views for you). Maybe make one for the big ones CorelDraw, Lightburn, Adobe, etc... Just an idea. Either way, awesome flags. Glad I found your channel......>>Dean

@ElCidPhysics90 Жыл бұрын

Where do you get your designs for the seals from?

@tylereason3372 8 ай бұрын

For stars on bigger flags do you prefer using a 60 or 90 degree v bit?

@RISENGRINDWORKSHOP 8 ай бұрын

It's really all personal taste or preference, for me I stick with 60* on smaller stars!

@lukaspotgieter7363 Жыл бұрын

What bit did you use for the fine details in the seal.

@JoseHernandez-mj6ne Жыл бұрын

Hi Ryan. Can you tell me the name of your CNC machine and did you take a class at a college or where did you learn how to use it? Is it a difficult learning process? I’m a jar head retired police officer so I’m board getting into the hobby. Thanks brother. Look forward to seeing more videos.

@cecilferris1163 2 жыл бұрын

Is that one piece of pine or did you glue up two pieces?

@RISENGRINDWORKSHOP 2 жыл бұрын

Glued up. Can’t find pine in a solid piece that wide. 👍🏼

@Ricks2Cents Жыл бұрын

Looks Great!!! I’m surprised your using rattle cans though.

@RISENGRINDWORKSHOP Жыл бұрын

Explain to me why I shouldn’t? Then we can talk about it.

@Ricks2Cents Жыл бұрын

@@RISENGRINDWORKSHOP If your Producing a Fair Quantity it maybe more cost effective to purchase a can and spray with a gun.

@Ricks2Cents Жыл бұрын

@@RISENGRINDWORKSHOP By being able to control the PSI also gives you more control on the Finish.

@RISENGRINDWORKSHOP Жыл бұрын

@@Ricks2Cents Your response was smart enough to get a reply :) - for short runs, rattle can all day! For production runs, I break out the HLVP spray gun. It’s still such a marginal amount of paint that gets laid down, that cans work just fine! Thanks for commenting and the compliment! 🍻

@RISENGRINDWORKSHOP Жыл бұрын

@@Ricks2Cents Have you painted CNC machined pine? There is no finish. These get painted and poly. Done! Not going to sand pockets and prime and sand again for a 150 wall flag! BUT yes spray guns for the win all day!!!!! In a production space.

@andrewklotz1436 Жыл бұрын

How do you keep the pine from bowing. Every time I buy glued up pine it's bowed and then add stain it gets worse

@ElCidPhysics90 Жыл бұрын

I’m guessing the vertical slats he attaches to the back help prevent bowing.

@rodkramer616 Жыл бұрын

what are the dimensions

@RISENGRINDWORKSHOP Жыл бұрын

18x35

@johnholmes6897 2 жыл бұрын

I'm an airbrush artist. So far frog tape has disappointed me every time. Paint seems to get under the frog tape.

@RISENGRINDWORKSHOP 2 жыл бұрын

Wow that’s the fist time I’ve heard anyone complain about frog tape. I just picked up an airbrush gun myself. Granted I’m no artist. Really wish I could airbrush. It’s one of my favorite things to watch people do!! Maybe try using a rubber roller to get some good down pressure. I also see they make a “delicate surfaces” version and it’s yellow.

@johnholmes6897 2 жыл бұрын

@@RISENGRINDWORKSHOP just practice. That's all . Watch how to's as well. It's really a good tool to master if you're into making artwork. Plus you can always ask for help. I'll lend a hand.