No video
MAKE the PERFECT CUSTOM CHATTERBAIT (How to BUILD)
Рет қаралды 18,984
Күн бұрынChatterbaits catch bass - so how do you make the perfect custom chatterbait? In this vid I show you how to build a chatterbait with just a couple tackle components from Tackle Warehouse. The D&M Custom Baits Pirahna is the first bladed swim jig I fished and it has a slightly different movement and vibration than a Z Man Evergreen or Jackhammer. If you're fishing a lake that gets a lot of blade bait pressure, this is a diy build you need to try fishing.
How to fish a chatterbait? I use a 7'2" MH Kryptonite fishing rod bit.ly/2YXZnKs and a 7:2:1 fishing reel. Depending on cover I'll fish it on 40-50lbs braided fishing line or 18lbs flourocarbon bit.ly/2YjSLXd
Want to build your own custom chatterbait? Here are the fishing lure parts we used:
D&M Custom Baits Piranha Swim Jig bit.ly/2Ivw9wn
Chatterbait parts bit.ly/2IxVZQC
NEW Mikeybalzz FISHING Floral Hats and Performance SHIRT - CHECK THEM OUT!!! bit.ly/2ZrWOEZ
SUBSCRIBE, LIKE, and Support #RealFishing!!!
Do you like the videos! Join the community and tell your friends to SUBSCRIBE and be a part of the most grassroots
OG fishing channel on KZfaq!!!
Subscribe: / mikeybalzzfishing
Inststagram: / mikeybalzz
Facebook: / mikeybalzzfishing
Twitter: / mikeybalzz
Website: mikeybalzzfishi...
LIKE, SHARE, love to fish.
#fishing #bassfishing #RealFishing #OG #fishinglure #fishingrod #mikeybalzzfishing #RAWWFISHING #catchemall
#lojofishing #fishingwithnorm #chatterbait #build #diy #howto #custom #perfect #tacklewarehouse
Make sure everyday includes your passion.
@r.barefoot8386 4 жыл бұрын
I may have left this comment on another video, but I’ve been using buzzbait wire forms and cutting the wire about 3/8” from the head, attaching a blade, then bending the wire over to create the eye. The wires are stout and a lot of buzzbait wire forms have the longer hook shank you mentioned. IMO there is a better action when the blade is attached directly to the eye instead of attached with a split ring. It’s always nice to be able to pick your own skirt and blade combinations too 👍
@ShaneJMcNair 4 жыл бұрын
Using a small center punch to open up the hook eye doesn't stress it as much. Just tap it on the anvil part of a vise. Learned from This Guy Skimpy. Living rubber skirts gives a different action from silicone skirts too... Thank for sharing, Great Tips & Tricks.
@zachjonas6987 4 жыл бұрын
Mikey, if u want to throw a chatter bait in thick wood of heavy cover, this is the best design ever. Take a strike king jointed structure bug head, like the wobble head thing, attach the blade to the eye with a split ring. Next cut the ewg hook off at the eye.Then take a weightless screwlock gammy hook, and put it on the back end of the wobble head with a split ring. Pop the screw out of the hook eye, slide a skirt up onto the front right behind the wobble head, then put the spring back in. Rig up whatever craw or swimbait u have confidence in and wack em with something unique. I've fished ponds people throw chatterbaits alot and I consistently get decent bites on this guy
@joepadfield6721 4 жыл бұрын
Dude first of all your channel RULES! second, making chatterbaits is a WAYYY better option than buying off the shelf especially if you pour from scratch like I do.
@kerrygarland2154 4 жыл бұрын
I take a dremel with a thin cutting disc and cut one single line slot down each side of the blade. It tightens up the wobble a bit but it also adds the sound of thrusting water when you rip it. Tight lines dude.
@johncorriveau7607 4 жыл бұрын
Depending on the depth of grass I’m fishing and how fast the fish want the bait, I’ll bend the blade. If the grass is high in the water column, I’ll straighten out the blade to make it rise up without having to reel faster. If I’m fishing deeper grass, I’ll put more of a backwards bend in the blade to force it downward so I don’t have to change my reeling cadence. Love the videos Mikey. I’ve learned a lot and there’s never a dull moment in your videos. Keep doing what you’re doing man and I hope to meet you one day.
@AnalogAssassin1 4 жыл бұрын
I have started tweaking my chattterbaits by both painting the blades and I have found that barely bending the contours of the blades can make them both displace more water but more importantly, make the blade start vibrating immediate with reeling, even with lower and more torque orientated reels. Great video though Mike..I will check out your recommendation in this video.
@robertcwillifordii2630 2 жыл бұрын
The only thing I would add is to manually wiggle the blade against the head so it loosens up the action, making the vibration even more intense and reactive to your retrieve.
@mcdrmtt 4 жыл бұрын
If you're going to change the jig itself, you can put a hardware washer on the snap in front of the blade to add extra sound & vibration.
@longrider692001 4 жыл бұрын
great video, and really appreciate the time to show us about the D&M attaching the blade. Been wondering on those for a while now, and might try that one out. My waters in W.Pa are typically clearer to slightly stained, and I fish from the bank as well, and vibrating jigs are my fave, so I try taking weighted swimbait hooks with split rings and a vibrating blade to create a "naked" vibrating jig. needs to be worked a bit slower but does work... appreciate the vid man!
@r.barefoot8386 4 жыл бұрын
Greg Thompson Works well with a speed worm too 👍
@victorxavier9977 4 жыл бұрын
That's a great tip I'll definitely try that here in CT thx!
@hbdejean6538 4 жыл бұрын
I heat up the eye and snip off about 1/8” then close it up a little further back so the blade is closer to the jighead. It makes the blade bang against the jighead. Huge difference...
@mikeybalzz 4 жыл бұрын
cool idea!
@joebleaux7039 4 жыл бұрын
I like to bend the blade back just alittle bit to change the pattern that the blade beats. To me i find it makes the lure present in a different manner then the fish may be use to but if nothing else it gives me confidence that my lure looks different to the same fish. Tight lines!
@robjones7410 4 жыл бұрын
I take my drimmel and make "indents" along the edge of the blade and drill SMALL holes in between them to give it a more erratic action c
@Mjones8383 4 жыл бұрын
I pull the skirt off and paint the blade black, then I bend the blade so it slows the vibration down and makes it similar to a Colorado blade spinnerbait and it's killer.
@dannyhocutt8490 Жыл бұрын
Thanks for all your information Mike
@charleslehew6053 4 жыл бұрын
I dont have any mods. But you put out some of the best content. Ive watch a lot of your punching vids and it has taught me how to catch fish punching. Now its the only way i wanna catch fish. Thaks man👍🤙🥊
@Chazues1 3 ай бұрын
Thanks for the info & the creative Insight ... Looking forward to trying it out !!!
@RA-hv8wr 4 жыл бұрын
I like trimming the skirt to where all the silicone strands are a slightly different length. Gives it a much better pulsing action in the water behind the blade.
@michaelloucks4448 8 ай бұрын
Hey Micky nice job d&m is the first chatterbait I ever used that bluegill color is the best I've seen on the market. When I first got the d&m chatterbait it was fall time and I whent to this pond and the bass where absolutely pyldriveing that d&m . Thanks for the build video God bless you and your family & boggs .
@joeculler1600 4 жыл бұрын
those lake O days are done good thing you got vid evidence to archive
@pj3p488 4 жыл бұрын
Ok, here is my ultimate chatterbait setup. Jackhammer with War Eagle Mouse skirt, Z man Razor Shadz Breaking Bream trailer and my secret weapon, a tiny squirt of Bang Shad every once in a while. I honestly believe the Bang makes a big difference between bumps and eats. I also catch a lot of fish just letting it sink to the bottom and waiting a couple of seconds before retrieving it. They will follow it down and crush it while it sits on the bottom. BTW, the Razor Shadz trailer will typically last 30-50 fish each. Thats it, no more, I won't talk. :-)
@carterball5633 4 жыл бұрын
Awesome to see that they found a way around the z man patent
@masonjames7814 4 жыл бұрын
The majority of fishermen on my home lake use trailer hooks on spinnerbaits and chatterbaits. Sometimes it can be as simple as running a 4.25 rage swimmer or a reaction innovations skinny dipper trailer instead. They crush that thing and with these fronts coming in I know what I’m doing this afternoon. 👀 Definitely gonna make some of those chatterbaits this winter though, that’s pretty dope.
@krav370 4 жыл бұрын
Coloring the blade with a sharpie 👍🏻
@GamblerLures 4 жыл бұрын
Little EZ Swimbait but rig it upside down - the thing will wag!
@charlesstager324 4 жыл бұрын
I do that with the mag chatter blade it kills them and that bigger blade more movement and it's great for coming through grass the blade just pushes the grass away try it keep up the videos
@proteusxavier9477 4 жыл бұрын
If you're using it for jigging, try tying a tiny glass or plastic bead onto the nose eyelet underneath the blade using a small length of braid so that the bead swings freely like a pendulum. At the same time, use a trailer that has a huge amount of body roll, or just rig one upside down. That bead will clatter against the head like nobody's business.
@TheJTTaylor000 4 жыл бұрын
Just this. And it's not much. But I do it. I always buy them with it already on it or I add a split ring between the blade and bait. It seems to me that it lets the blade move freely. I sometimes will bend the blade a little. Also, of course now as you know I make my skirt to whatever colors I need them to be if I can't find exactly what I'm looking for. Now to the video within the video. DUDE!! Those monsters attacking right at the boat, GEEEEZZZZ! I'd love to have a day like that for sure. Great video again man. Keep'em coming. Tight Lines.
@granttruax7839 4 жыл бұрын
What size snaps do you use on your chatter baits and on your crankbaits? Awesome video and informative as always
@John_D2 4 жыл бұрын
I fish the regular $5 zman chatterbait , with a bps 4" cajun trailer. The only thing I do extra is sharpen the hook. I believe in keeping the size compact. Every once in a while , I'll throw a bass assassin 3.5" lit'l boss on as a trailer.
@1Epicdoom 4 жыл бұрын
I tweak the blade with needle nose pliers to give it a slight concave blade imagine a sail full of wind that's the shape I go for makes that puppy vibrate so much you feel it in your chest I also like ribbon tail trailers the extra length of the ribbon tail and has much more action then a curly. I like to toss it out let it sink to the bottom and fish it by hopping it off the bottom you get the vibration when you lift it and that ribbon tail flutters on the fall
@robertcwillifordii2630 2 жыл бұрын
I bend the blade sides forwards too. But I also wiggle the blade manually, so it has more play going side to side. This step increases the intensity of the thump even more and the reactiveness of the lure overall.
@wonderdock922 4 жыл бұрын
Very informative video. Sometimes you have to not fish to get ready to fish!
@nathanoneal5801 4 жыл бұрын
I like to take a pair of needle nose and bend the upward concave even farther up makes it vibrate alot more
@robertcwillifordii2630 2 жыл бұрын
I do that too. And if you manually wiggle the blade against the head, it loosens up the action, for an even deeper thump.
@bobbymoran4379 4 жыл бұрын
I do like to bend the blade a little more. Also not really a modification but just varying the retrieve, not just straight reeling it in. Great video definitely want to turn some of my jigs into bladed jigs!
@johncliser8700 4 жыл бұрын
I like to dimple my blade with a little nail and hammer. It ends up looking like a bunch of golf ball dimples but the vibration is different. I also add a swim bait trailer.
@sayxiong92 4 жыл бұрын
Rage craw, Googan bandito or krackin' crawl, and curl tails. Used for playing with water displacement, depths, and action.
@ryanslev52 4 жыл бұрын
Cool video Mikey. Ik still new to the chatter bait game but I'm trying to throw it more. Seems to be the way to go. The only thing I've modified on them is bending the blade a little more and also taking your advice and darkening the blade. Keep up the good work. Thanks
@fyffeal 4 жыл бұрын
i buy swimbait heads off ebay for cheap and blades from janns,, I have about a buck in them and they start up instantly. nice vid!
@tylerpignato9696 4 жыл бұрын
Been using a finesse worm as a trailer for years. Different action and no many people do it. Also he bizz baits dizzy diamond is also killer just a trick worm with a bulb tail.
@ercly9382 4 жыл бұрын
How long of a finesse worm do you use? Or cut one down? Colors preferred? New bass hunter here.
@daviddura1172 4 жыл бұрын
LOOK UP Barlow's catalog, out of Richardson (Dallas) Tx.... nice selection DIY chatterbait parts, blades in sizes and finishes, clips, o rings , jigs everything to DIY online ordering, nice people....
@brianwareham7783 4 жыл бұрын
Hi Mikey! I thin the skirt a bit by trimming and even removing some of the strands. I think it allows the bait to shimmy some more. Also, the Cut Tail worm is one of my favorite trailers to use with it. Great video, thanks!
@sportyroads5682 4 жыл бұрын
Sand down and spray a thin layer of spray in bed liner on the blade.. gives it a little different action as well as makes it dark with no flash.
@mikelanning5148 4 жыл бұрын
I will add a jig rattle onto the hook shank before adding the trailer. Gives it a little more and different sound. Great video
@baitpainter 4 жыл бұрын
I have been opening the eye of a 1 oz. jig and putting a mag blade for muskie on it. And put a swimbait with good live swimming action on it.
@biggybrocosta 4 жыл бұрын
I take the skirt off and use a zoom super fluke as a trailer.
@Lilrhino81 4 жыл бұрын
I Add a dyi brush guards with 200lb test mono fishing line. Also flip any swimbait body I use as trailer upside down to Change up the action. Aive also used bug/creature type baits to get a different action.
@frankolivafishing1919 4 жыл бұрын
Do you have an issue with that bait wanting to come to the surface? I always use a standard chatterbait because Everytime I try another brand they want to come to the surface. Also I run my chatterbug skirtless always. If the bite is tough I paired mine with a small swimbait 3in it gives the bait a crazy erratic action that I feel produces bites when others won't.
@smokingreelztv8219 4 жыл бұрын
Frank Oliva Fishing if your having a problem with the bait running high in the water column switch your trailer to like a fluke or skinnier profile swimbait and it should help keep it down.
@frankolivafishing1919 4 жыл бұрын
@@smokingreelztv8219 thanks for the tip
@gregjohnson6799 4 жыл бұрын
I learned this from Tactical Bassin’...not my original idea...but I turned my trailer upside down. I use either a Recon Shad from Bass Munitions Lures or an EZ Shad. The thump from the blade does not affect the action of the swimbait trailer this way.
@jonathangamlin9741 4 жыл бұрын
I will use a permanent marker to darken the blade will even add red stripe to change it up. Will cut the skit way down and use small trailer like rage tail for finesse type profile. Thanks for even more ideas keep up the great work.
@patriotjfishing3934 4 жыл бұрын
I do several mods. I sharpie the blades black, I will trim the back skirts and sometimes I will cut the front skirt like a finesse jig but not that short.
@steveevans4932 4 жыл бұрын
i like to spray a stainless silver blade with WD-40 the take a propane torch and heat the blade gives in a some dark color to the blade and does not come off.
@johndrx165 4 жыл бұрын
Excellent video! Hard to find jigs you can open like that. A more finesse trailer is just a straight Power Worm. I use a 4" pearl white with a white chatterbait and it does great. Trying lots of trailers and have made a few. Some with swing heads. Love the bladed jigs.
@kimsatterfield2749 4 жыл бұрын
Man that is killer baits thank you for showing me them
@B_the_Cameraman 4 жыл бұрын
I like to take the shine off the blade (dark blade) and I will even take the skirt off sometimes. Just gives it a smaller/ slick profile. It has worked well for me.
@madmattfishing 4 жыл бұрын
Great video. I always paint the blades diffrent colors just to see if something works better then others. Just Mix and match, try to be different. Actually used bright pink colored blade for smallies. Worked good for me
@wulfthornoutdoors 4 жыл бұрын
I like to drill holes in the blades, experiment with different size holes, an vary locations. Also try mixing size holes, like 2 1/8 on one side and 1 1/4 on the other, it gives a more wounded wobble to the bait. Holes also can produce bubbles in the baits trail or wake.
@stevebeavers3754 4 жыл бұрын
I use dark green blade and skirt. Trailer is a head cut off Yamamoto swim tail, also dark green.
@ermannodangelo1062 4 жыл бұрын
Love your videos, those were awesome top water fish. If you have any jigs with the eye turned the other way I use a split ring to attach jig to blade. It gives it a little more action also.
@Landofbaits 4 жыл бұрын
One thing I always had a paddle tail in white or green pumpkin and also I bend the blade up to almost a 45 degree angle and you can fish them slower
@hunterhenderson8542 6 ай бұрын
buy the baby chatter bait remove the weighted hook toss on your personal favorite hook and it creates a shallow/top water vibration presentation or add a weighted soft plastic to make it sink slightly farther. also add a rooster tail to a chatter blade you wont be disappointed
@brianbickhaus9081 4 жыл бұрын
Bend the lip a bit more for a faster engagement plus add a Speed Craw or like for additional action and vibration.
@joshfinnerty3807 4 жыл бұрын
I usually just paint the bills black or I’ll leave it for a shad representation. One thing you can also do is to give the bill a little bit of red which is just something a little different.
@changthao5736 4 жыл бұрын
I sometimes cut the skirt a little bit on the ends so that i can add a VMC bladed Treble hook to give it a little more flash. A little bit of flash can make a difference to make a Bass react to something different. Especially when I fish for Smallies in MN Rivers ( St. Croix River, Snake River and Mississippi River )
@mcdrmtt 4 жыл бұрын
Mike, you've got to try fishing recycled swimbaits. Any swimbait that you may have had a fish rip the tail off of works great. They vibrate in perfect unison with the blade.
@victorxavier9977 4 жыл бұрын
Great video Mikey thx! I unfortunately don't have any tips still trying to get better at fishing them!
@foreignbeggar3783 4 жыл бұрын
damn. I honestly never really thought about making my own chatterbaits. it’s really a rad idea. but what I will do... is i’ll buy 2 or 3 of the same chatterbaits, either identical in size or in different sizes and i’ll bend the blades more or less on them while I keep one as “stock.” if you give the blade a little more of a bend, you’ll get a “harder” vibration. the only thing I haven’t figured out is how to get it to start instantly when I do that. if I mess with the blades, it takes a couple of cranks to get vibrating. so if I kill it, it takes a crank or two in order to get it going again. i’ll also trim my skirt up a bit. nothing crazy, i’ll take like a 1/4” off, maybe a bit more depending on my trailer. sometimes rigging swimbait trailers upside down will give you more action & water displacement as well. dope video mikey!
@jbclouser 4 жыл бұрын
As always love your how to vids I bought the skirt set made some jig skirts and 👍 to the chatter bait hack will give it a try .
@austinspringer7114 4 жыл бұрын
Does making my own count as a tip? Haha. I don't get to throw them that much but I've contrasted colors before instead of matching them like most people do. (E.g. Black/blue chatterbait with a white trailer and dye the tail chartreuse or orange). Caught some nice fish doing that. Gambler made a nice chatterbait before until they discontinued it like their spinnerbaits. I still have a few somewhere. Great video and tips. Thanks for sharing.
@sportmod11p63 4 жыл бұрын
I always repaint my blades a matte black, alittle sanding, a little airbrush work and some rattle can clear.
@Hoosier60 4 жыл бұрын
High pressured lakes, I like to add holographic prism tape (usually black, blue, yellow or green depending on water clarity; and, occasionally red or purple) to the blade to give them a different look that they haven’t seen before.
@mjhoss 4 жыл бұрын
Two things: First, I've been successful this year by using a Fluke as a trailer for my chatterbaits. Second, I've really gotten into making custom skirts to match what I have in my local lakes and replacing the standard skirt with one of my own.
@marksterling3914 4 жыл бұрын
Rig a V&M -J-Bug sideways. Works very well.
@diybassfishing5757 4 жыл бұрын
Drill...port a hole or two in the blade to add some extra cavitation and lighten the blade slightly. Instead of adding a trailer hook add a trailer spinner blade on a swivel in eather a Colorado or Willow leaf type in a nice flash or contrasting color.
@bayouburner281 4 жыл бұрын
I dig the Rage Blades-I’ve notices that they want to ride up in the water column so I bend the blade back towards the hook to remedy this.
@rickhensley3895 4 жыл бұрын
For a finesse type bait I will use a Zoom Z craw jr.for a trailer and for a bigger profile bait I will use a Zoom z craw for a trailer both with the skirts trimmed down.
@drummertroyg 4 жыл бұрын
Cool bait Mike !
@landonbaudoin5241 4 жыл бұрын
I put a sexy shad mudbug by Baudoins Baits in the back of my white chatterbait. It gives it more vibration in a compact profile
@spitfire186 4 жыл бұрын
i like to put a gary yatamoto zanko on it as my trailer best trailer hands down then every once in awhile i like to wake it on top and get topwater strikes!
@t_aoutdoors2962 4 жыл бұрын
Ive been using nates custom baits vibe and ill swap out the blade with a phenix blade and drill the holes on the blade out to make it slightly bigger and use a ta quick clip
@bartcornelius7717 4 жыл бұрын
I've never built one. Maybe now I'll try to build a few. 👍
@zackbriggs9258 4 жыл бұрын
Dipping the skirt in jj's magic!
@TheBushape 4 жыл бұрын
I know I'm way beyond any type of give away but a little tip I hope helps, instead of bending your eye out bend it to the side and it will weaken it much less.
@leadfreelures 3 жыл бұрын
Use a Bio Bait goldfish (switchback) as a trailer suttle action and amazing scent infused in the bait.
@fishingthe4102 4 жыл бұрын
I burn the blade on my chatterbaits in order for it to keep a darker tint longer then using a sharpie
@zachsteak 4 жыл бұрын
I like to bend the blade a bit more than stock. It really makes it come alive.
@ronanoutdoors 4 жыл бұрын
So, I cut my skirt with an erratic angled pattern and depending on what I am fishing for and the “day”, will switch up my trailer to actually UP SIZE it. Yeah. I know. So you have the vibrating blade but sometimes adding an “upgraded” or over sized trailer can make a major impact. Trailer? Think like Rage Tail Lobster instead of Craw. Instead of Gambler EZ Swimmer the full on Big Ez. You get the vibration of the blade and the trailer.
@judweaver3635 4 жыл бұрын
Unfortunately I don't have any chatterbait mods as I haven't fished them much. Just got a Jackhammer & I'll be trying it out soon. I try to let the trailers do the work, so I pair baits up to get the action I'm looking for.
@paulsvec1225 4 жыл бұрын
i use a xcite shadnasty on the back of my chatterbait . and i trim the boot tail
@mccainbeck4208 4 жыл бұрын
Trim skirt , color the blad with a sharpie , die the skirt , add sent , add a rattle , sharpen the hook , even add a trailer hook when the fish are kinda slow .
@jacobstone3240 4 жыл бұрын
Put half a zoom trick worm on the back
@derekgreen9622 4 жыл бұрын
I’ll sharpie out the shine from my chatterbaits sometimes to eliminate flash then put some scent on it to cover the sharpie scent
@kenmccarthyfishing 4 жыл бұрын
I would Love to have some of baits brother,,I don't do anything special, but I want try some of these cool things I learned hear 👍👍👊👊
@TheLeftyGolfer84 4 жыл бұрын
I haven’t really done anything custom, but I’ll run a 4” kitech swing impact upside down, and it seems to kick a lot better. Or a rage menace with the tails vertical instead of horizontal and it looks a lot better.
@joshbennett9258 4 жыл бұрын
I'll cut my skirt to make it into a finesse jig look. Sometimes the little smaller profile gets smashed on my lake.
@johnproctor2594 4 жыл бұрын
Dang it I’m just now seeing this do another giveaway please! Awesome video man!!
@frankbednarchek1481 4 жыл бұрын
I have a tip, I was fishing with my buddy last week and when I went to cast he hit my line which cut my ChatterBait off and it went flying. So the tip is don't let your buddy hit your line when you're making a cast.
@backwoodsbassin6087 4 жыл бұрын
I take a rage menace i put it on sideways gives a different action
@patricknault2377 4 жыл бұрын
I run my craw and beaver tail trailers veritically instead of flat to mimic more of a side to side tail action in blue gill colors
@sixgrigsby8615 4 жыл бұрын
So far I have only used Z man chatter baits and all I did is trim the skirt to match the trailer and then a little bit of the top to fluff it out
@schmidtfishingfactory8256 4 жыл бұрын
Honestly, I have no confidence it chatter baits. Only mod I have done is black out the blade. Good tip on dulling it out. Makes sense.
@michaelbrooks6976 4 жыл бұрын
I get the z man original chatterbait in 1/2 oz or heavier and sand the bottom of the head so it's flat....that gives the bait a nice hunting action and it won't blow out when you speed up the retrieve . DONT TRY IT WITH A 3/8oz you will take too much lead off the head and the bait will not run right at a normal retrieve speed.
mikeybalzz fishing
Рет қаралды 14 М.
Matt Luna Fishing
Рет қаралды 12 М.
Mike Iaconelli Fishing
Рет қаралды 23 М.