MAKE YOUR DRIVER BETTER / 3 SIMPLE DRIVER ADJUSTMENTS

Рет қаралды 162,183

4 ай бұрын

If you struggle with your driver, both in distance and direction, I've got 3 changes you can make to improve your overall driving.
Interested in a fitting, custom build, or repair? Contact me
adam@elitefitgolf.com
(404) 225-2511

Пікірлер: 127

@brianhoward6283 4 ай бұрын

What a nice instructor and good honest info

@chandlerclements7316 4 ай бұрын

I needed to see this video. Thank you!

@christopherdyer1862 4 ай бұрын

Thanks for sharing your tips with us. I'm always tinkering with clubs to get the most out of them. Keeps the game fun for me. I'll give this a try

@obxarms7685 4 ай бұрын

Hey AJ! Spoke to you yesterday about a re-shaft and a lie adjustment. Things have changed now I'm thinking about sending you a whole set so I need to give you a call again. Great video! Keep em coming!

@jessehupko 4 ай бұрын

Great lesson! Good job!

@dukeesq 4 ай бұрын

Nice recommendations, AJ! Will try it out, thanks.

@markushayes 4 ай бұрын

Just got my 230 Max in. Great all around performance.

@mick19421 3 ай бұрын

What a helpful video, shows the importance of having a proper fitting by an expert, fascinating.

@pauldavis8286 4 ай бұрын

Excellent video! I was fit for a Titleist TSR2 at 45" in length, but found I was hitting it all over the face. Experimented at the range by using Dr. Scholls foot powder to determine the strike pattern at 45" and gripping down a half an inch. Found that my center contact was much better at 44 1/2". Subsequently, took a half inch off the driver shaft, changed the back weight to get the swing weight correct, and changed my shaft from a 58 gram to 65 gram shaft. My distance improved slightly, but my dispersion improved significantly. No more high right tee shots!

@mariad750 4 ай бұрын

Great comment, and would think being fitted would’ve addressed these adjustments from the onset.

@pauldavis8286 4 ай бұрын

@@mariad750 There are a lot of factors that go into a fitting, and in particular, the standard length for Titleist drivers is 45.75". While doing the testing this was way too long, and they only had a 45" demo driver shaft that we moved to. I hit it well, and that was what we settled on. However, playing many months with it, I noticed I was getting inconsistent contact. Thus the "real world" testing on the range.

@paulg1358 3 ай бұрын

I had an easier fix. Purchased a used , near mint driver and didn’t notice grip was “mid size”. Played a few rounds and leaked a few to the right. Changed grip to standard like the balance of set and boom! No leak so Straight ball!

@mickealoliver4070 4 ай бұрын

Good video. I adopted the shorter and heavier shaft 3 years ago and it made a world of difference! I went from hitting the fairway 40% of the time to 80% and I gained 5 yards on average. I currently play a Callaway Rogue ST Max with a Ventus Red Velacore at 44”.

@kevinthorp1419 4 ай бұрын

I struggle to hit my driver high custom fitting I was minus 4 at impact. I saw your test with Mr short game playing around with butt weights. I got a callaway 13.5 epic driver off eBay. Fitted an 85g small jumbo max grip brought the swingweight down to C6 and it’s now perfect really helps me to control the face and the loft/thicker grip combo gives me a great height. I’d never have thought it would work but it really does for me.

@thegolfingmusician6345 3 ай бұрын

And just like that everyone proceeds to eBay for a new shaft. Great video.

@GONADSable 4 ай бұрын

I play a Taylormade sldr 14degree driver with a 3wood shaft, love it

@anthonypalladino830 4 ай бұрын

Great video very helpful and practical!

@Labgorilla 4 ай бұрын

I have been to a fitting session with a pro for my tsi3 driver. Then on the range use lead tape to make the weight feel as I want it. My driving went from my worst category to my best. There is no huge secret. Just practice harder and get help from professionals

@gatgolf 4 ай бұрын

Hey AJ, great video. I have been modifying my drivers like this for years. Lose maybe 10 yards but really pick up accuracy. I call mine my "safety driver".

@mikereed3287 4 ай бұрын

Many years ago Ralph Maltby of the Golfworks had specs for a "hero driver". He suggested to make a driver 1/2" shorter than standard and at least 2-4 swing weight points heavier than usual. This shorter, heavier club would help someone who felt they could not hit a standard driver. I currently play a 44" Ping G425 with a D2 swing weight and 10.5 degrees of loft. Works for me !!

@johnathanwetherill456 4 ай бұрын

D2 is really light though right ?

@pauldavis8286 4 ай бұрын

@@johnathanwetherill456 D2 is pretty much middle of the road, with C8 being very light, and D6 through D8 on the heavier side. When I got my Titleist TSR2 @ 45" it came from Titleist at D5. Since I'm 73 years old, I prefer a driver in the D2-D3 swing weight range, as I can feel the head and hit the middle pretty consistently. My driver now plays at 44 1/2" and D2. In most cases, driver swing weight is a personal preference.

@gerrymcintosh4477 Ай бұрын

My wife’s driver is E2 and she hits a mile. Her driver is a lot heavier than my Ping driver 🤷‍♂️

@patrickdabs 10 күн бұрын

I’m playing my 9° rogue triple diamond all the way down to 42.75” (half tip trimmed half butt trimmed) and hot melt added to get the CG forward and weight up to D6. After that it feels hard to miss the center and it hits nearly the exact same shot shape unless you make an awful swing.

@pete8890 4 ай бұрын

Good work, thank you.

@chetchilders3041 4 ай бұрын

Excellent video! My friend and I refer to lead tape as "magic" tape. It can do wonders for your club adjusting and be easily removed if it doesn't work.

@tonysanta3497 2 ай бұрын

Cutting and counterbalancing driver by wrapping the shaft under the grip 7 1/2 inches with lead tape, has been a game changer for my game. Love the videos AJ!!!

@KennethFitzpatrick 4 ай бұрын

Absolutely love your videos they cover such a wide range of topics. One thing you might help explain is how putting weight on the heel of a driver makes the toe close faster. If i drop 2 weights and one was slightly heavier the heavier one would hit the floor first.

@richardjacobs7632 17 күн бұрын

Good video! Food for thought! The choke up works for me, so does turning the face down on the way back!

@xy-pk8gb 3 ай бұрын

Nice swing. I have been convinced for a long time that most amateurs play drivers that are too long with shafts that are too stiff. I play a 44" driver with a 40 gram, ladies flex shaft and love it.

@cksamo 4 ай бұрын

Nice vid, love tinkering like this. If you don't like the lead tape route, often you can just add an additional weight. For instance, in my TSI3, i just added a lighter than standard weight in addition to the weight it came with. I can usually find lighter weights for less $, so it's cheaper too than buying a whole new heavier weight.

@stevendickinson2897 4 ай бұрын

I try that AJ great vid thanks

@niteninja0133 4 ай бұрын

I got my driver at 3 wood length and it's been so much better. I like to play a light shaft with a heavy head. My irons are the same. I put 3 pieces of lead tape the length of my p790 heads. On each head

@MarkLaLone 4 ай бұрын

I have a three wood shaft on my driver. Definitely helps. I still hit a lot of bad drives, but that has everything to do with me being bad at golf.

@user-dh4uc9if1z 3 ай бұрын

I have tried my G425 3 wood shaft in my G430 LST and it is quite pleasant. I shortened the driver shaft 1/2" before trying it just afraid to pull the trigger and permanently swap the driver to 3 wood length

@EldredMerricks 3 ай бұрын

Thanks for the video - this was great! I would love for my ping g30 to feel like my Callaway rogue 3 wood… I just move way better thru it! This may just be my fix! I’m ok with my driver but I’d like to get more distances.. 3 wood off the tee (260 avg carry) driver off tee(250 avg carry)

@233blackout 4 ай бұрын

Love your videos. Subscriber

@peterparker5166 7 күн бұрын

Great content bro

@claudevoyer7124 4 ай бұрын

Great video

@JLeeGolf 4 ай бұрын

Next time I’m out in ATL, need to get a proper fitting for the top and bottom end of the bag

@jarisalmi6484 4 ай бұрын

Comprehensavily said🤝

@ProfMash 4 ай бұрын

Very cool!! Time to play with lead tape, thanks!!!

@Alan-75 29 күн бұрын

I took the shaft out my Titleist 910 driver and put it in my 910 3 wood, i now hit 3 wood 270-275 hardly miss a fairway and have an extra wedge instead of a driver. I also seem to hit the 3wood better off the deck now.

@steveschwalbach4070 13 күн бұрын

You don’t have enough weight on your left side through out your entire swing….then you won’t need to change so many things ! Try Stack and Tilt method !

@bruceshearer8711 Ай бұрын

Pulling out the lead tape and giving it a try.

@ronmullard5718 4 ай бұрын

I went down to a ladies length and weight shaft in my driver (use a 12 degree loft) found it much better..

@terryholloway9930 4 ай бұрын

Thanks AJ

@mistersooty 4 ай бұрын

I do this with my Driver's and it makes them a lot easier to hit - I replace the weights with heavier ones rather than using tape - the only thing is I find the shorter Driver with more weight back gives me much higher launch, so I actually lower the loft.

@christopherchavez6155 4 ай бұрын

I’ll subscribe thankyou

@niteninja0133 4 ай бұрын

Can you do a video of tipping vs cutting the butt end?

@stuartkennedy4570 4 ай бұрын

Excellent video. Interesting you didn’t mention grip thickness can make a difference also

@jayhales3822 4 ай бұрын

I must be an exception to the rules. Chocking never seems to work for me on any club no matter how I go about it but the putter. With my driver I found out decreasing the loft actually helped my driving tremendously in dispersion and distance.

@EFGMC 4 ай бұрын

If choking up doesn't seem to be working, it is most likely you either don't like the lighter head feel that results from it (which is where the lead tape or weights come in) or you don't like the smaller grip diameter you get from the lower hand position. That is harder to remedy short term in testing although you could use some anti slip tape to build it up.

@AZstu324 4 ай бұрын

Great Video AJ! I'm 6' 3" and play a 45g R flex shaft at 44.75", D3 SW, and a low spin tour head at 8°. My cruising SS is 110 mph and this setup has me hitting absolute bombs on a rope! Low spin head + higher launch lighter but stable shaft, and a head that i can feel through the swing, is the key.

@tjostrom5530 4 ай бұрын

Love to know your setup what head what shaft like the idea very much!

@AZstu324 4 ай бұрын

@@tjostrom5530 so I guess technically it's not a "tour" head but it's a low spin, lower lofted head. It's a PXG Gen 6 with a Maltby MPF Pro UL (ultra light) R flex shaft $40. The shaft is 47g before it's cut. The head is lofted down to 7.5°. I also have a Garafalloy Pro Launch Blue 45g A flex that I've been using for the past 2 years $60. There's a big group of us on MGS who have been playing these with huge success. Look up Shaft Hack - the Otto Phlex Journey.

@AZstu324 4 ай бұрын

@tjostrom5530 4 ай бұрын

Thanks so much!

@MaartenAnna 4 ай бұрын

That was great! I usuallynplay a 60g stiff shaft but I'm thinking about getting a 50g regular shaft and tipping it, as well as playing it an inch shorters. How much weight would I need to add (approximately), to get a similar though slightly lighter swing weight?

@EFGMC 4 ай бұрын

10g

@Ponchis.Golfing 4 ай бұрын

Great Video! Thanks! Just wondering for the shorten option (which I did) how much weight / lead tape would you add per inch reduced?

@EFGMC 4 ай бұрын

I would use between 5-10g. Test it to see how much works for you.

@markrobinson3060 4 ай бұрын

I play Aldila quantra senior shaft at 45 inches would cutting down or gripping down change the flex

@EFGMC 4 ай бұрын

Flex and feel of flex can get complicated. Best advise I can give is try gripping down and see if you like the feel of the shaft better or worse.

@mikeoakley7470 2 ай бұрын

How do you determine where to put the lead tape on the head?

@Durwin-ny4zf Ай бұрын

Kind of cracks me up to be honest. When I started playing golf in the early eighties, the standard driver length was 43". My old TaylorMade Bubble Super Steel driver is "standard" length for the day, has a swing weight of D1 and has 10.5° of loft. It does, however, have a much smaller head. Since, today's heads are larger and more forgiving, I can see the advantage. But still, my next TaylorMade driver was 44", D2 and also 10.5° with a 360cc head. What would be the difference between that and a shortie driver?

@pete9909 4 ай бұрын

I have an old driver head that I want to add weight to and wondered if it's possible to drill small holes and put self tapping screws in , like a pxg look.

@EFGMC 4 ай бұрын

I've never tried. Not sure if that is legal or not according to rules of golf, if that matters to you.

@purrly8578 4 ай бұрын

Lovely video once again! For us nerds can you give full specs on each driver? Like what is playing length of both? Swing Weight of both? What shaft? Anything else you can think of, thanks!

@EFGMC 4 ай бұрын

Gamer is a Mizuno ST230X 9.5 at 45 inches. D2-3 SW. Fujikura Ventus TR Blue 6S, Lamkin ST+2 Hybrid 360 Shortie is a Srixon ZX7 MkII 10.5 at 44 inches. D2 SW. Fujikura Ventus TR Blue 7S tipped 1/2 inch. Same grip

@bruceshearer8711 4 ай бұрын

Great video and love the data. Why go heavier on the head. Couldn’t you swing the lighter head faster. Thanks

@EFGMC 4 ай бұрын

Yes, but you might lose control with it.

@stuartanderson2528 Ай бұрын

How about changing ball position?

@kellyhughes1266 Ай бұрын

what is the length of both the standard driver and the "shorter" driver?

@mpb1472 3 ай бұрын

New subscriber here and am very impressed with your knowledge and presentation. A golf store fitter cut a driver 45-gram shaft below 44" after seeing my inconsistency with the standard 45.75" standard length that's in my SIM. I hit it more consistently in the store but on the course it was shorter in distance. I checked the swing weight and its C6. He did not suggest I do anything to the head or get another shaft. I have another track weight but that might add too much in the front lowering launch more. Your suggestions in the video seem to make your setup work quite well. Mine is a 9 degree, set upright. What suggestions would you recommend I try? What length is too short? Thanks .

@EFGMC 2 ай бұрын

First I would try the extra track weight since you have it and it's an easy test on the range. After that, some lead tape on the back lower portion of the sole. I'd start there.

@mpb1472 2 ай бұрын

Thank you. I am watching your videos and learning a lot.

@mikehammett6652 4 ай бұрын

Coincidence that this video came out as im having kinda this problem. And ordered lead tape2 days ago to hopefully remedy the problem. My gamer driver was a 2021 PXG 0211 with a 70g stiff diamana S+Limited shaft at 45.75. I hit it great but its not great in the distance department so i upgraded to a Cobra Aerojet driver with a stiff 60g Kai'li shaft 45.5. Its like night and day. Its so light i cant feel the clubhead. Shots spraying all over the place. Should i start with putting the tape on the clubhead or experiment with placing 10 grams on the shaft?

@EFGMC 4 ай бұрын

The tape will obviously be faster unless you already have another shaft tipped up for that head, so I would start there.

@judenwaiwu4583 4 ай бұрын

I am trying to build the cheaper version of Autoflex shaft so I went from a stiff shaft to a senior flex and lite weight, going into the TSR2 head. Should I shorten the length of the shaft and add weight to the head or short the length and play with the standard head weight or just play everything standard?

@EFGMC 4 ай бұрын

Start standard. You can always shorten later.

@edwarddunk2731 4 ай бұрын

Good info. What about grip size?

@EFGMC 4 ай бұрын

I wouldn't change grip size just to improve your driving unless you were going to change grip size through the bag. Not saying don't try it, but I like all the grips to be the same driver to wedges.

@caroline5952 4 ай бұрын

What’s the difference after shortening the shaft to add weight back with a heavier shaft vs lead tape to the head itself? Also, if I prefer a lighter swing weight can I just shorten and not add back any weight??

@EFGMC 4 ай бұрын

Adding head weight is 5x more influential in increasing swing weight than shaft weight. That's why I recommended focusing on that first. If you like the feel of the club after shortening without changing any weights, then by all means go with that.

@marciz34 4 ай бұрын

Would adding loft with a high swing speed work? I thought that was not ideal

@EFGMC 4 ай бұрын

If you've got significant curve, the loft can help. It's and easy thing to test out on the range so really no down side.

@Big-Crow 4 ай бұрын

You should make a butt trim vs tipped shaft video

@leonardblush2557 4 ай бұрын

Great vid from my newest subscription! How much does an inch of lead tape weigh?

@EFGMC 4 ай бұрын

Depends on the density. They make a few versions but the thicker one is probably about 2g per inch.

@leonardblush2557 4 ай бұрын

Gracias!@@EFGMC

@mick19421 3 ай бұрын

Tried AJ, nothing works, I don’t really want to keep pulling in case shaft breaks.

@golfish8589 4 ай бұрын

I cut 3 inches off of my g25 driver. How much weight to I need to add to retain the correct swing weight. I love it being 3 inches shorter

@EFGMC 4 ай бұрын

That puts it at around 5 wood length so we would want to aim for that kind of head weight if we want a "standard" swing weight feel. 25g as a starting point but you may find less or more than that feels better to you.

@spfunk8812 4 ай бұрын

with the cleveland xl driver i understand they have a counterweight in the grip end of the shaft, so my question is do i need to take shaft out from head or can i cut grip end of shaft ?

@EFGMC 4 ай бұрын

I have not seen the specific counter weight in a Cleveland, but every other brand can be easily removed before you cut the shaft. After you can decide whether you want to reinstall the weight or not.

@spfunk8812 4 ай бұрын

Thanks for your reply ,i enjoy your videos@@EFGMC

@drakehukill2956 4 ай бұрын

I play a TS2 with an x-stiff tensei AV blue shaft, I struggle with hitting the ball too high and feel I'm losing distance with the ball spinning up. The loft is turned down to 8.75 degrees, would applying lead tape near the face lower the ball flight and possibly spin?

@EFGMC 4 ай бұрын

Yes, right at the front of the sole, close to the face. Usually won't make a huge difference but it can help. I would also keep track of your impact location as that can make a big difference in launch.

@Willberight2moro 2 ай бұрын

Have you used a launch monitor to see attack angle. It may be that you are hitting down, causing more height and spin.

@mick19421 Ай бұрын

AJ tried this with TaylorMade Driver, lead keeps eventually coming of, any suggestions or can I get a better quality strip.

@mick19421 Ай бұрын

Sorry of

@kurtmoore6333 4 ай бұрын

In one show you put weight in shaft, counter balance Is that not a good thing to do, have you tried counter balance with more weight in the head Love watching the show

@EFGMC 4 ай бұрын

Counter balance is something you just need to try and see if it gives you the results desired. I had it in my wedges and mini driver for a while. Not currently though.

@jeremyvelazquez2037 4 ай бұрын

How long should one practice with these changes before you reevaluate

@EFGMC 4 ай бұрын

Multiple sessions. Couple range, and at least 1 on course would be best before deciding on permanent adjustments.

@michaelackley1560 4 ай бұрын

So does the shorter go in the bag????

@EFGMC 4 ай бұрын

Will find out.

@mick19421 3 ай бұрын

I have a standard Sim 2 Max Taylormade 12 degree Driver, have a push or strong slice. Is it possible to get a heavier weight put in near the heel as I don’t want to go up to the 14 degree. Or is the only option to put lead tape near heel.Thanks. Mick

@EFGMC 3 ай бұрын

Might be aftermarkets available but lead tape will be easier and cheaper.

@mick19421 3 ай бұрын

AJ thanks again for your advice, never before realised how important it is to get fitted for clubs. Really enjoy your series. Once again thanks for your help. Wish you well. Mick

@chrisgilligan4968 3 ай бұрын

I'm not sure how you could use the loft sleeve to add loft - which in most cases both closes the face angle, and makes the lie a little more upright....and then miss it to the right???🤷‍♂🤣Great tips though....all of those tips are a great way to self correct if one doesn't have the time or budget for a club fitting.

@EFGMC 3 ай бұрын

The change in adapter setting can be viewed in one of two ways. If you square the face to the target or more specifically if you have the same face angle every time, you do change the loft. If you just lay the club down and let it sit as it does, then you are more likely to see the face angle change. You can't make any blanket statements about lie angle because different brands have different starting hosel positions so the same loft change can have different lie changes. That said, even if you change the lie angle more upright on the driver, the actual change in the ball starting more left will be extremely small and honestly not worth worrying about.

@chrisgilligan4968 3 ай бұрын

@@EFGMC Definitely true about correcting the face angle off the ground and taking your grip with a neutral face!! It was kind of tongue in cheek....🤣 Those 3 tips are all great to help people reduce the dispersion, and hit more fairways!!

@jonmdaly7032 4 ай бұрын

Is it within the rules to add weight?

@EFGMC 4 ай бұрын

Completely

@jonmdaly7032 4 ай бұрын

Thanks.

@aaronjeffries3383 Ай бұрын

Know a few guys that put 3wood shafts in theirs and are way more accurate.

@brocklambert Күн бұрын

Or just go get fit for a driver. While few people need a 45.5” shaft for a driver, most everyone should be able to swing 44.5” to 45”. The problem for most people is the lack of spin. People are playing low spin balls, low spin heads, and low spin shafts and they wonder why they can’t hit it straight. Spin is your friend.