Make your own Ceramic 3D Printer

Рет қаралды 455,805

11 жыл бұрын

This is the documentation of the delta 3D printer that I have built to print with clay. The aim of the design was to keep it simple, using basic DIY skills and parts available on the internet. Detailed information on the build is available in the studio journal on my website at www.keep-art.co.uk/Self_build..... There is also a Ceramic 3D Printing Community on Wikifactory that has been setup in support - see wikifactory.com/+Ceramic3DPri... .

Пікірлер: 146

@cffellows 10 жыл бұрын

Hat's off to you sir! This is about as elegant as any 3D printer I've seen. Simple materials, straight forward to put together. Great Video!

@raguaviva 10 жыл бұрын

This was AMAZING! Keep on the good work!

@xfarsys 3 жыл бұрын

i love how the parts are designed to no waste material, minimal but functional

@CarolinaSilvaPlata 8 жыл бұрын

This is wonderful! congratulations!

@jkpottery 9 жыл бұрын

With regards how much these machines cost to build there is a full bill of parts with suppliers on my website. Depending how and where you get your parts they will cost around £350 (UK pounds)

@timothyosullivan8869 7 жыл бұрын

that's very reasonable!

@martinmiglio 10 жыл бұрын

that is a very cool build

@TheBoBNa 10 жыл бұрын

Oh man many thank for a great video and for a very simple plan.

@garylcyhk 9 жыл бұрын

Nice build! Thank you!

@thePavuk 8 жыл бұрын

I like that simple design.

@ZopteY 9 жыл бұрын

Thanks for the amazing video!

@dalsbury1979 9 жыл бұрын

Wow, really cool. Seriously inspired to build my own.

@StuffPeterLikes 10 жыл бұрын

Great video and an elegant design. Others take note of how good a video can be when a tripod is used!

@juliandurr4945 10 жыл бұрын

this helped me create my 3D pinter thanks

@leomachado7676 4 жыл бұрын

Well done!!!

@drinkwater9624 2 ай бұрын

Wow beautiful efficient design and great work man skill, I thanks for sharing your great work, I wish you successful for your hard work in your products.

@TheVetzzang 10 жыл бұрын

Oh my. Exellent printer!

@LightYourselfUp 11 жыл бұрын

Congratulation! awesome job!

@pangeatech8738 10 ай бұрын

Amazing Work. Thanks for share.

@grumyoseph 10 жыл бұрын

You are Great man! Thanks, well done!!

@grandgamer9833 8 жыл бұрын

you'r the best youtuber i have ever seen

@ddd543 10 жыл бұрын

Thanks for the Video! Nice Concept.

@nucleusv 11 жыл бұрын

it is super cool! thank you!

@LawrenceBrennan 10 жыл бұрын

That's excellent!

@joshmore2469 10 жыл бұрын

Dammit. I do NOT need a new project right now.

@SHAli1474 10 жыл бұрын

Awesome!!!! Awesome!!!! Awesome. Thanks man.

@wizardanime9865 10 жыл бұрын

Good job👍 And Thankyou

@midastrader 10 жыл бұрын

fantastico!, one cuestion - the system detects when fill material or a manual? Which type of card you use for this?

@priyamchocolates4989 9 жыл бұрын

Such a great thing...

@meetmehta2982 9 жыл бұрын

Vry nice video....but how can we get the measurements of the stencil that u have used...???

@konggoods 9 жыл бұрын

Good project ...

@martinocko9 6 жыл бұрын

what rod leinght did you use for connecting linear bearings to the printhead

@markusnyhamnhersvik1647 10 жыл бұрын

Can i use my 3D printer to print these parts?

@syedrizvi6408 9 жыл бұрын

Very nice and informative video. How can we get the dimensions or stencil for the hardware of the 3 D ceramic printer?

@burner838 10 жыл бұрын

Amazing

@ozaynergiz6887 8 жыл бұрын

I think this is the chippest delta I can build.Maybe app. laser makes it much faster to dehidrate or adding iron dust to ceramic and with anti gravity magnetics for avoiding wind deformation.Great help for my delta project.Thanks for nice share..

@antonisperis98 9 жыл бұрын

where can i find these parts help plz

@fpvleo2606 8 жыл бұрын

cool printer !!! :)

@spencer1774 3 жыл бұрын

Hi Jonathan currently in the process of attempting to build my own version. Could you explain what you’re doing at 3:12? And what parts are included?

@paruld8054 10 жыл бұрын

Can this design be modified to make a bigger print capacity? Thank you!

@sweLogan 10 жыл бұрын

Where can i find part for building one of my own?

@brunocabral1578 4 жыл бұрын

How did you drill the side holes on effector and carriages?

@salehzakaria9342 10 жыл бұрын

i respect you man - many thanks

@Thats_Cool_Jack 10 жыл бұрын

what was the overall price?

@zazzou9225 10 жыл бұрын

thank you for this.... I d' like to try, but I have a lot of (stupid ) questions....

@edulorenzini007 8 жыл бұрын

Jonathan ,aonde consigo estas medidas para construir uma igual? Obrigado.

@AlSTORIES777 8 ай бұрын

Can we change with the filament exteuder?

@itsanshtak 9 жыл бұрын

it was wonder full where did you buy the parts

@taxmoco14 8 жыл бұрын

ohhhhhhhhhhhhhhhhhhhhhh.... increible..... este señor sabe como hacer las cosas... mas facil que la prusa i3... super

@walterhynson2898 10 жыл бұрын

Great much better and lower initial cost than anythink I have seen so far. ...WCH

@LWJCarroll 11 жыл бұрын

I agree!!...."clean and simple and beatifil.." especially having the PDF files availble...Rgds..Laurie

@wellbertymapelli6203 6 жыл бұрын

você tem o projeto da montagem e peças dessa impressora 3D.

@tutorial9704 9 жыл бұрын

I didn't understand what u used for your print head pls can u explain

@arvindh13 7 жыл бұрын

where is ur stimulation? u did send a cad file to the driver to print right?

@arvindh13 7 жыл бұрын

Can you give me the measurements of the wooden pieces please.

@FilmFactry 11 жыл бұрын

bravo!!! Do you have a BOM for this?

@reygon9138 9 жыл бұрын

I will use this video

@reygon9138 9 жыл бұрын

did I say T-shirts I mean toys and T-shirts XD

@MarcosDonzino 9 жыл бұрын

hi, the ceramic is "free flowing"? like no control of the flow ?

@111atulkakkar 10 жыл бұрын

Hello Jonathan.... i have been trying to open the link u have given but it show a Bandwidth error

@heshamteaima1403 9 жыл бұрын

Thank you in advance for the video :)

@usmcbrat7276 10 жыл бұрын

cool Does it have to be built for Ceramic ? OR can it use other things like wood filament and such ?

@arvindh13 6 жыл бұрын

hw did you join the gt2 belt??

@Jigatree 11 жыл бұрын

This is one of the best things I have ever seen. What would you estimate the cost of it to be? Love the printed pots on your website, all so full of movement. I especially like some of the trees and your early prints. They remind me a little of some of my work, but these are not 3D printed. It would be really good to make some work this way. Thank you for sharing.

@JuanHernandez-ih2rc 5 жыл бұрын

is your contribution incredible, I only have a problem, the software that you present you had in Google+, and this network does not work, could you put it in another place or say where we can get it? Thank you

@jkpottery 5 жыл бұрын

Google+ has closed down as you found so the Ceramic Printing community has moved to Wikifactory - wikifactory.com/+Ceramic3DPrinting. So you can ask questions of the community at Wikifactory Ceramics3DPrinting and I have posted my Self Build projects at wikifactory.com/@jonathankeep. I hope this is useful.

@MrFritzthecatfish 10 жыл бұрын

Hi, very inspiring work. Could you be more specific about the part numbers of the Techcon Systems dispensing gun you use and the cartridges? On your blog it is mentioned the TS series. Unfortunately on the Techcon Systems website I was unable to locate all the items. Thank you

@jkpottery 10 жыл бұрын

I get my Techcon Systems bits from Ellsworth Adhesives in Scotland but this link shows the kit - www.techconsystems.com/Cartridges__Material_Packaging/id-TS950-3/TS950_Series_Cartrdge_Gun_Assembly_No_Retainer_100_psi_

@MrFritzthecatfish 10 жыл бұрын

Super. Thank you

@juansebastianobonaga9283 7 жыл бұрын

What kind of ceramic do you use?

@manishapatel9780 7 жыл бұрын

can i use A4988 driver 3D Printer Module Stepper Motor Driver 3D printer Ramp CNC (D05)

@kristianrica5953 10 жыл бұрын

plz tell me where to buy these parts

@sommarlovskul 10 жыл бұрын

How big is the printing area?

@ysmartauto2562 3 жыл бұрын

thanks sir

@syedrizvi6408 9 жыл бұрын

Do you supply these items? I would like to buy if you do.

@Raeglar 5 жыл бұрын

Sir. Please can you tell me what's the length of the Arm rods after installed the ball joints?

@jkpottery 5 жыл бұрын

See the video kzfaq.info/get/bejne/h52llrud07Kwmac.html.

@prosim_neplakej 8 жыл бұрын

can i print with plastic filiament?

@pedramkhoshnevis 9 жыл бұрын

bravo !

@wernertrptube 9 жыл бұрын

You build your own Filiament paste ?

@continental_drift 11 жыл бұрын

Thanks for the video. From the videos I have seen on KZfaq, delta printers seem faster and quieter. Is that just my imagination or is it true?

@alejokalderon 4 жыл бұрын

Nice job, congratulations, so do you sell all the pieces? If yes can you please give me a link or a contact form to get more information. Thank you.

@vijay35703 6 жыл бұрын

How to buy this printer

@dearhappiness0329 3 жыл бұрын

Just Wonderful::::::::::::::}

@jkpottery 11 жыл бұрын

Most of my videos are speeded up but deltas can be fast and if you tune your stepper motors well also quiet. My old Bits from Bytes RapMan is quieter and much more tuneful.

@tharukahiran2729 3 жыл бұрын

how to order this parts

@RichM1967 8 жыл бұрын

Could you mount one of those 3d pens and make it print in plastic?

@HaraldSangvik 8 жыл бұрын

Of course! But it would be way better to just add a real extruder, then you will have a good 3d printer.

@MarijanPollak 7 жыл бұрын

Honored sir, I a m trying to assemble a ROSTOCK Kit that came without arm sticks. Now this model is supposed to have 50cm diameter and 100cm height workspace. Unlike Your 3D printer that look more like KOSSEL, it has square plates so even if I have program that calculate lenght of Kossel arms, I have problem with this one, specially since it came with one side 5cm shorter. I extended plates on that side and found out that it is too tight on other sides as well. Now I can inscribe circle that touch sliding bars on all 3sides and radius is 33cm. However central plate cannot reach this as there is distance from Hot end to joints on that side. So how to calculate Arms lenght? I found some spreadsheet calculator but it calculated from height of work area which look to me as upside down procedure. Anyway I cannot change workspace Diameter as it would require new skeleton, which right now I cannot afford to purchase. Please Help! LIkewise, I did not see how You connected Timing Belt ends, I just saw You looped already straight piece of belt, shall I look again? I also did not receive any screen and somewhere I read Arduino is programmed by jumpers, which remind me on first computers and their cable connections. I also wonder if it is possible to build machine controlled from Laptop, which is more powerfull than Arduino. Likewise I tried to generate Gcode for one of my 50cm diameter objects and program told it need 437 Terabytes of RAM, which I find horrifying. What can average computer owner do in such case? Use Clouds Computing service? Sincerely, Marijan Pollak from Croatia, EU.

@imalkanirash505 4 жыл бұрын

How to buy

@ahmedhammad2482 8 жыл бұрын

where is the g-code ? ...thank you

@sunilshah3287 10 жыл бұрын

Super

@jkpottery 10 жыл бұрын

I do not have the time to help individuals but there is a Google+ Community - see plus.google.com/u/0/communities/109375785524125994679 and there is lots more help there. Good luck.

@dhruvagarwal4426 2 жыл бұрын

Really great!! I have managed to build the frame of the with all the electronics i am facing too errors in the firmware when i try to compile it in the arduino. I i could get some help regards to the firmware it would be a great help.

@dhruvagarwal4426 2 жыл бұрын

i have also gone through all the videos of and wikifactory platform. I have tried to connect with you on linkedIn as well. if you could kindly connect.

@jkpottery 2 жыл бұрын

Hi Dhruv, I am sorry to hear about the difficulties you are having getting the firmware to work. The information you are looking at is about 7 years old and I am afraid I do not know what changes have been made in the hardware, the Arduino and the LCD screen, and then also the software the marlin since then. I have not worked with these technologies for about five years so I do not quite know where it is all now. I am an artist and not a specialist engineer or technologist and worked out the information I needed from the internet when I was working with this technology. All I can suggest is that you try and find up to date information on the internet. The important thing is to get a version of the Marlin firmware that is compatible with the Arduino and LCD screen that you have. Good luck with your project.

@dhruvagarwal4426 2 жыл бұрын

@@jkpottery thank you soo much for the reply. We have managed to compile the firmware as of now and we shall upload it to the arduino once we have the mechanics ready. I had a small question in mind the stepper drivers used in the ramps. Is it possible for me to use any stepper drivers or is there any specific stepper drivers which have to be used in the ramps for it to work.

@jkpottery 2 жыл бұрын

@@dhruvagarwal4426 as I said I am no specialist in the technological aspect and fortunately the ramps boards I bought always had the appropriate stepper drivers in place. I did do a bit of internet search back when I was building machines and it seems some drivers are better than others and did order some highly rated drivers and felt the machine ran better. Certainly once building a machine in Iceland we were having difficulties and after many hours of frustration found that on the ramps board under where the drivers push in are raised slots and the little metal bars had not been put into the slots! They were provided in the ramps kit but not assembled. There are so many variables, problem solving is always just a slow process of logical deduction and testing. I always had a lot of problems with the logic of the endstops so I hope those work for you. Again it was trial and error that sorted it out.

@dhruvagarwal4426 2 жыл бұрын

@@jkpottery thank you soo much for the reply I can help you with logic of the endstops if you still wish to solve the problems. I wouldn’t mind learning from you and big up challenges like these

@mrinalchakravorty5999 7 жыл бұрын

measerments of MDF and plastic parts

@twalexbai 10 жыл бұрын

Cool

@jkpottery 10 жыл бұрын

I have been having sound problems with my own videos. For some reason the sound is turned down as default! If there is a X through the speaker icon, left mouse across it and move the slider to full volume. There should be sound with this video.

@jkpottery 11 жыл бұрын

It will all depend at what price you can get the bits, but could be half the price you suggest.

@YahyaChanle 6 жыл бұрын

which type of screw you had used @2:39 ?!

@YahyaChanle 6 жыл бұрын

tell me the name please !! or send me a link of that type ..

@pathosbedlam6293 11 жыл бұрын

How about a 3D printer that prints in wax. Then you can cover items printed in plaster, for quick molds, that can be used to make metal objects. The wax should melt out when kiln fired. Leaving the reverse mold of what you want to make in metal.

@bensumpter1658 2 жыл бұрын

Seems like you would have better dispersion control with a a screw system rather than air.

@microthermalinc 10 жыл бұрын

Very interesting video. If I want to learn to make 3d printer, can you help me?

@nRADRUS 9 жыл бұрын

nice but later ? printed body crashed under self weight ?

@pbgdrowned2519 9 жыл бұрын

love you

@rakeshraky5071 9 жыл бұрын

Hiii sir, i have constructed a ceramic 3d printer as same as yours but the problem is my stepper motors are not working they aren't rotating properly i will be happy if u solve mine.