Make your own electric outboard! What we have learnt!
Рет қаралды 481,486
Күн бұрынFinally, let the build series begin!
You've asked for it, and now we are making it a reality!
The goal of this video was to present what we have learnt over the past few years of building/running this DIY outboard; in hopes to make your DIY projects slightly easier😃
And remember, do as we say, not as we do😉
Next up in the build series, a look at the electronics that power this setup!
EDIT. Part two is here! • Make your own electric...
------------------------------------------------------------------
A rough list of what is needed for a DIY electric outboard conversion:
Recommended aluminium thickness for bottom plate: 3mm or more if using more powerful motor
Aluminium thickness for a cover: 1.5mm
Stainless steel or aluminium everything!
Stainless steel bolts, M6, machined heads: www.amazon.com/Socket-Screws-...
Stainless steel nuts:
www.amazon.com/QMseller-Nylon...
Stainless steel washers:
www.amazon.com/binifiMux-100p...
Connectors:
www.amazon.com/Connecteur-Plu...
--------------------------------------------------------------------
Update 20230622: Since we have made this video we have created our own webstore, where you can find batteries, ESCs, motors and anything else you might need for you builds! The webstore is expanding by the day, so keep an eye out over at:
www.marsons.se
Anything questions? Feel free to contact us via email: info@marsons.se
------------------------------------------------------------------
Timestamps:
00:00 - Intro.
00:50 -The Workshop.
01:05 - Discussing our accidents...
01:30 - Video information!
01:45 - Lower outboard unit discussion.
02:45 - Discussing ICE disassembly.
03:20 - Working with aluminium.
03:50 - Disassembly of electric outboard.
04:43 - Motors and learnings!
05:53 - Box design.
06:43 - What we would change!
07:47 - Water cooling fail.
08:07 - Reassembly and bolts.
09:05 - Motor choice!
09:45 - Continued reassembly.
10:15 - Water cooling.
11:51 - Connectors.
12:42 - Easy threads in aluminum.
13:15 - You wish John ;)
13:30 - Assembled. Summary.
14:43 - A spin on the lake.
15:24 - Outro
Music: Synapse by Shane Ivers - www.silvermansound.com
@ChrisBrown-jh2mo Жыл бұрын
I've watched a lot of diy electric outboard videos, this one is by far the best, no waffle, no faffing about, just good info well presented.
@fpn78 Жыл бұрын
+1
@johndehosson Жыл бұрын
Hi Chris! Jack here. Thankyou very much for your kind words😊 Glad you enjoyed it! We have more videos on the way so stay tuned!👍 /Jack
@louiebrake1297 11 ай бұрын
Louie Louie Louie ❤Louie ❤❤❤❤
@ComputerSystemTweeks 5 ай бұрын
Some people try to soak minutes, these guys cut and dry
@Harley365 Жыл бұрын
Guy on the camera is really good at interrupting and not letting the other guy finish a sentence
@johndehosson Жыл бұрын
Hey there Mike! "Guy on the camera" here😅 Yeah, this video got really messy since we weren't on the same page on what we where going to include before we hit record🙃 If you check out our newer videos I hope that you find them to be better structured, more flowy and less interrupting😃👍 Thanks for watching🍻 /Jack
@JasonSipe16 Ай бұрын
@@johndehosson appreciate the mature reply--and excellent vid!
@Yodacious 7 күн бұрын
Great Video Guys
@aussie2uGA Жыл бұрын
Excellent conceptional tips! Gives us a lot of guidance and direction to build our own. Thanks
@johndehosson Жыл бұрын
Nice to hear that it was helpful @Aussie2u👍 Hope you want to build your own!
@newzealandhoris4208 Жыл бұрын
I like this stories just as much as learning how to do things so when I find cool dudes like you guys I don't mind watching the whole thing
@johndehosson Жыл бұрын
Howdy @newzealandhori's420! Thanks for the message, and hopefully we can continue making fun vids which keep you interested! Let us know what you'd like to see, you never know what we'll do in the future! /John
@Wahunganganshapunck 11 ай бұрын
Daily commute! Sounds so great.
@johndehosson 11 ай бұрын
@Wahunganganshapunck Commuting becomes fun when it's like this! 😅
@sarcasmo57 Жыл бұрын
I love that sound.
@johndehosson Жыл бұрын
So do we! It revs like craaazy!😁 /Jack
@niokolabs Жыл бұрын
Smooth! I love it.
@johndehosson Жыл бұрын
Thanks Nico! We have more videos and projects coming! Please consider subscribing if you want to see more😊 Have a good one! /Jack
@victoryfirst2878 4 ай бұрын
YOU GUYS RULE THE WATERS !!!!!!!!!!!!!!
@johndehosson 2 ай бұрын
Cheers mate! Yeah this build was a BEAST! We have kind-of retired it as of now lately... miss it so much🥲 Have a good one🍻 /Jack
@victoryfirst2878 2 ай бұрын
@@johndehosson Thank you for the education Jack. Peace and out Sir. v
@TheTonester2312 11 ай бұрын
Pretty intense!! Very neat 😎👍🏼🙏🏽 Traxxas should be proud.
@johndehosson 11 ай бұрын
Cheers @TheTonester2312 🍻 Yes they should, that controller has been through a lot; and is still to this day running the show!💪 Thanks for watching! /Jack
@AAbreu004 Жыл бұрын
Thats awesome bro 😮
@johndehosson Жыл бұрын
Thanks for the visit @Alex A
@remi009340 11 ай бұрын
Awesome video and great idea for your hardware storage! Cheers from Canada, Subscribed!
@johndehosson 11 ай бұрын
Thanks for watching @remi009340👍
@FainTMako Жыл бұрын
Subscribed literally from just the intro. Im still watching the video.
@johndehosson Жыл бұрын
Thanks for subscribing @FainTMako, nice to have you with us! /John
@breeze38 Жыл бұрын
Good work, good boat.
@johndehosson Жыл бұрын
Thank you @Breeze! Cheers!
@H3ath Жыл бұрын
Thanks for this
@johndehosson Жыл бұрын
Anytime, happy to make another vid if it's helpful @Heath Yeager! /John
@Seafariireland Ай бұрын
Way to go! SkipRay, Kerry, Ireland.
@johndehosson 29 күн бұрын
THanks for watching @Seafariireland /John
@antonio.stefanelli Жыл бұрын
Hi! Great projects, I've subscribed because I want to see the Episode with ESC, BMS and Battery! Thanks a lot from Italy
@johndehosson Жыл бұрын
Thanks @Antonio Stefanelli! Great to have you here! My hope is that we can get the next video out for the ESC next week. Have a great weekend! /John
@andreyl2705 Жыл бұрын
nice project))
@johndehosson 11 ай бұрын
Cheers🍻 Glad you liked it! Feel free to check out our other videos for more, equally awesome projects😎⚡⚡⚡
@tony.engineering3265 Ай бұрын
Sandy Munroe would be impressed 😂
@johndehosson Ай бұрын
@tony.engineering3265 It'd be an honour for the guy to rip the build to pieces😅
@jimmyericksonbordayucra6209 Жыл бұрын
Nice video saludos desde Perú
@johndehosson 11 ай бұрын
Thanks jimmyericksonbordayucra6209 😃 Glad to have so many international viewers onboard🚤🍻
@newzealandhoris4208 Жыл бұрын
Wow that went way better than I expected the hole shot is not bad on a smaller lighter kayak that thing would be unbelievable
@johndehosson Жыл бұрын
Put that on a kayak and it'll send you to the moon @newzealandhori's420! 😅
@grantd.5438 9 ай бұрын
Really cool! I want to build off this design and take it to 'jet' propulsion (still tiller steer). Would be neat to have 'bursts' of power, while staying efficient when idling at lower speeds in terms of Amp usage.
@johndehosson 9 ай бұрын
Sounds like great fun @grantd.5438 ! Thanks fro dropping by!
@MyllerSWE 11 ай бұрын
Whait! what? This is filmed in Sweden? Awesome content :D Subscribed!
@johndehosson 11 ай бұрын
Thanks @MyllerSWE! Nice to have you hanging about!👍
@earnestbass4043 4 күн бұрын
Great video! Pardon my hearing, but what electric motor is that? And how did you modulate the speed?
@ThailandAmazing Жыл бұрын
Holly cow no wonder that boat flew. That’s a motor to power a plane. 300 amp ability. Ohh my. The battery have to be a monster.
@ThailandAmazing Жыл бұрын
Awesome
@johndehosson Жыл бұрын
So true @Guy Ruff😅😅 No mucking around here😅😅 Power to the people!!!🍻🍻
@johndehosson Жыл бұрын
We'll be doing the battery video next week👍👍
@ThailandAmazing Жыл бұрын
@@johndehosson that much battery be freaky expensive
@johndehosson Жыл бұрын
@@ThailandAmazing You always get what you pay for, as you know⚡ I think the quality and size we have reached is at a cost point which gives good returns for everyone, so it's going to be fun to get that out to everyone.👍 Fair play to all🍻
@bforbonc Ай бұрын
The aggressive turns💀
@johndehosson Ай бұрын
Always @bforbonc 🍻🍻
@victoryfirst2878 Жыл бұрын
Nice job fellas. Hope to make me one this year. Like the comment on the video too.
@johndehosson Жыл бұрын
Hi @Victory First! Thanks for dropping by! Make sure to participate in our competition for one of the motors in the other video! /John
@victoryfirst2878 Жыл бұрын
@@johndehosson I will do just that this week fella. Thanks for letting me know.
@user-ud3ds9qy7s 4 ай бұрын
❤❤ممتاز لدي سؤال ما هوا موديل هذا المحرك الكهربائي ومن اين اجده
@mikesherman8590 7 ай бұрын
From Arizona US/ China haahahah we love you guys
@johndehosson 6 ай бұрын
CHeers @mikesherman8590 🍻🍻🍻🍻
@johndehosson Жыл бұрын
Update 20230622: Hi everyone! Thankyou for your patience. Our Website is now up and running again, so head over to marsons.se to get your hands on any electronics you might need for your builds! The webstore will be expanding over time, and we will make videos about our kits showcasing how to use them😃 If you are looking for something that isn't in the store yet, odds are we can still help you. So feel free to email us at info@marsons.se if you have any questions! Cheers🍻
@tommyjackson6216 Жыл бұрын
REALY SPOOLS UP. GREAT !!!!
@johndehosson Жыл бұрын
Oh it sure does!😁 Thanks for watching, glad you enjoyed it! /Jack
@MikaelMountainman Жыл бұрын
Hi I belive i have seen a video where you built it from the beginning using wood and along that video there was a list if i remember right, either attached to the videodescription or like a pdf or something of all the parts used with partsnumber and where to buy them? Or have i just dreamt that? :) I´m seriously considering building one of these of youre design when you released the second video cause i love my fishingboat but hates the sound and polution it makes :P Really looking forward and great job,really appreciate it!
@johndehosson Жыл бұрын
Hi Mikael! Nice to have you around, is it at all possible we may even have chatted at one stage? Har för mig att vi sågs på nåt forum? :) And yeah, you're attentive as! There is a video of the wooden model, a parts description and list floating around somewhere, just not sure where anymore! Hope you can do your own build, and that the next videos answer your questions around the ESC and batteries. After that, just scale it to what you want! /John
@pafnucytv5337 Жыл бұрын
Dobra robota
@johndehosson Жыл бұрын
Cheers @PafnucyTV🍺, thanks for dropping by!
@TimsWorkshopTJY 11 ай бұрын
I have a 3hp old Johnson motor that I'm thinking about doing this too since the motor is passed it's prime. What I would like to do is put the original hood and lower cowling over the electric motor to keep the classic look.
@johndehosson 11 ай бұрын
Hey Tim! Jack here! Love that idea! Personally wanted to do it with this one, but for ease of installation with the original design (non flipped axle) we just built a custom box. An original hood would also have enough space to accommodate some sound proofing! That would make it a really quiet setup for trolling or simply not waking the neighbours😃 Good luck with your project! Keep us up to date👍 Cheers🍻 /Jack
@TimsWorkshopTJY 11 ай бұрын
Oh, was heat an issue?
@johndehosson 11 ай бұрын
Not when water cooled👍 Can't run it as hard as we do without it though. We ran it passively air cooled for a while to test and ended up frying a motor😅
@adwhite804 11 ай бұрын
I’m digging this idea or reusing an old outboard.. my question is, where you find this motor?
@johndehosson 11 ай бұрын
www.marsons.se 👍👍 /John
@ThailandAmazing Жыл бұрын
Ok found link. Your on a roll. Seriously you should build pre made kits of all the stuff. So guys like me can order it. And you make some cash.
@johndehosson Жыл бұрын
@Guy Ruff, thanks! An absolute honour you think Jack and I are worthy of that! To make things better, we're actually doing that! Within about two weeks we will be releasing the website for our electric airboat and outboard. Full builds or kits, it's all happening!👍👍 For our part, we're just stoked if you can share it around and get us some subscribers and likes, that really helps us a lot👍👍🍻
@SuperMapupa Жыл бұрын
Excellent ! any chance for a link for the motor used?
@johndehosson Жыл бұрын
Hi @SuperMapupa! www.marsons.se See U there!👍
@surfreadjumpsleep Жыл бұрын
thank you this is awesome. how many watts does it use? And the power it provides? How fast does your boat go with that power?
@johndehosson Жыл бұрын
Hi @Matthew! All the answers are in the videos, but in short, I think it is about 8-10kW, and our little boat tops out at about 25kph. Have a great day! /John
@flynnt77 2 ай бұрын
What kind of motor is that? I have an old 25 horse outboard lower and would like to give this mod a try. Building a solar powered booze cruiser out of an old pontoon boat, nothing fast, but I'm having a hard time finding a powerful enough motor to drive it.
@duliomartinez8238 11 ай бұрын
Hey mate! Looking to build one of these (using parts from your website) and throw one on a small 2013 bayliner- do you think the power will be sufficient?
@johndehosson 11 ай бұрын
Howdy @duliomartinez8238! Not sure as to the size of the boat, you'll need to give me some details of that. But I got ur email and have replied, so we can hang out there 😀 /John
@TheInsultInvestor Жыл бұрын
I made one of these before you and still have it
@johndehosson Жыл бұрын
Glad it's held up! /J
@danielgalvin9330 Жыл бұрын
Hi guys , love your work. I am very interested in this electric motor stuff . I was wondering would a washing machine motor be good to use and what type of battery set up would I need?
@johndehosson Жыл бұрын
Hi @Daniel Galvin! Thanks for dropping by! A bunch of parameters need to be decided when choosing a motor. I'm sure you could get a washing machine motor to work, but it could be tricky when pairing with controllers, batteries etc. There are some good quality motors, which aren't too expensive, like the one you can get from our website, which are probably much better to use. At the same time, it could be a real lot of fun getting a washing machine motor to work! Regards John
@azlantornado86 7 ай бұрын
@@johndehossonyour website link?
@johndehosson 7 ай бұрын
@@azlantornado86 www.marsons.se 👍
@azlantornado86 7 ай бұрын
@@johndehosson tq.
@motorv8N 8 ай бұрын
Great project and one I’m itching to do. Bit late to the party but could you explain exactly how the cooling works for the motor? Are the tubes just stuffed in the box or is there some kind of liquid heat exchanger in that motor? Also I’m thinking if you used the original cowl with some judicious venting you might be able to manage the heat more easily due to the likely larger internal air space.
@johndehosson 7 ай бұрын
Hi @motorv8N ! No heat exchanger, purely runs water through the water mantel in the motor, and you're right of course, the more cooling, the better! /J
@motorv8N 7 ай бұрын
@@johndehosson - hey thanks for the reply. I guess mantle is what I meant - I.E. that motor is designed to have water lines plugged into it.
@patriciojosebordenave70 3 ай бұрын
Wow, great work! I'm sorry for asking that but, what about the battery, voltage and what kind of motor is that? maybe you said those things but my English is very poor and I missed it.
@johndehosson 2 ай бұрын
Hey patriciojosebordenave70! Jack here! Sorry for our late reply! In this video we where using a 96V battery. The motor you can buy from our website marsons.se. If you have any further questions feel free to contact us via email: info@marsons.se
@corygodwin1162 Жыл бұрын
What kind of controller do you use to control the throttle of the motor. And I was curious how the wiring works.
@johndehosson Жыл бұрын
Hi Cory! Sorry we omitted that detail! We'll cover it in a coming video, but in short: a Traxxas controller/receiver connected to a port on the ESC 👍
@kellyrafferty7792 Жыл бұрын
Hello thank you for reaching out . Let me give you some of what I have and whT I am trying to do . First I have a 1968 glastron 150 gt . A go fast sky type . It currently has a 70 hp evinroude outboard on it that is almost dead . Now put of not have thousands to throw at a new motor gas / electric plus electric has market is not looking at boats like mine . Now I would ultimately like to make the equivalent of 70 hp to 115 hp with my 70 hp gear case under an electric power plant .
@johndehosson Жыл бұрын
Hi @KellyRafferty! Looks like you need a larger electric motor, probably around the 50kW mark. Head for some strong batteries, and you should be right to go. Electric will be overwhelming when it comes to torque, so be ready, it's fun! /John
@boathemian7694 Жыл бұрын
I’ve got a British seagull that’s getting converted
@johndehosson Жыл бұрын
Sounds like a great project @Boathemian /John
@BigChief3324 Жыл бұрын
Great video, couldn't find the link to purchase the motor. Who makes the motor and what's the model number. l want to purchase one do they have a website
@johndehosson Жыл бұрын
Hi @Lewis Martin! It should be back on the website now, we needed to adjust some of the watercooling on it. :) Regards John
@cranberriesdoodle1450 11 ай бұрын
Please do a longer lead in, KZfaq take a few seconds for the arrows and pause sign to disappear from the screen after clicking on the video. So the first few seconds of every video is obscured by controls etc.
@johndehosson 11 ай бұрын
Try pressing on an empty part on the screen and the controls should disappear😃👍 Thanks for watching🍻 /Jack
@cranberriesdoodle1450 11 ай бұрын
@@johndehosson I do, still lose about 2 or 3 seconds after video starts, thanks though!
@MotorSailingforOldDudes Жыл бұрын
Damm Just bought one. What sort of range do you get? You sound like a couple of Aussies.
@johndehosson Жыл бұрын
Hi @MotorSailingforOldDudes! Range is about 15-20kms, depending if we take it easy. But generally we just gun it because we only have short distances to go😅 /John
@CHOWIXCHANNEL Жыл бұрын
Bro where we can get one of the motors and how much sounds fun
@johndehosson Жыл бұрын
Hey there CHOWiX! Jack here! You can purchase that exact motor from our website as of today🥳 www.marsons.se/ Check it out, and good luck with your project! Keep us updated👍 Cheers🍻 /Jack
@c.stewart000 Жыл бұрын
epic
@johndehosson Жыл бұрын
Thanks Cameron! Glad you liked it😊 /Jack
@AngryLS1 3 ай бұрын
What run time/ distance could you cover eith this on your battery pack?
@johndehosson 2 ай бұрын
Hey mate! Jack here! With this old battery we used to get 5-10kms of range. With our current battery setup of 4.8kWh, we can get 10-15kms of open water running of the airboat. Haven't tested with an outboard just yet, but should be upwards of 20-25kms at cruising speed... So plenty for most I'd say :) Have a good one🍻 /Jack
@Magma_Boy Жыл бұрын
In the link in the description for motor is with the shaft comming out from the top. Is there a way to buy the motors with the shaft comming from the bottom?
@johndehosson Жыл бұрын
Howdy @MagmaBoy, just let the guys know when you order how you need it mounted👍Have a good one🤘🍺
@Magma_Boy Жыл бұрын
@@johndehosson Great thank you 👍
@johndehosson Жыл бұрын
Anytime👍
@Chanselleur 9 ай бұрын
Would a microwave magnetron do anything crazy connected to this?
@johndehosson 9 ай бұрын
Hi @matthewburns6868 ! We love trying stuff, wrecking it, and blowing it to pieces, and my thought is that a microwave magnetron could do just this! 😅 Only problem is, we don't have the cash to do it all the time! 😅 Have a great day! /John
@rexsolomon6325 6 ай бұрын
Here's a suggestion, but first test the aluminium box to see if it is getting hot after using the motor for a long while. If so, you'll know what to do.
@johndehosson 6 ай бұрын
@rexsolomon6325 Thanks for the idea! Nice to have you here! /J
@Karl-mr5bm Жыл бұрын
What HP are you trying to mimic , battery voltage did you install
@johndehosson Жыл бұрын
Hi @Karl! In this writing moment, I'm not sure exactly what we run (it is in the video somewhere), but (I think) we output around 8kW for daily use. /John
@mr.mikesart7111 10 ай бұрын
What are you cooling since there is no combustion engine?
@johndehosson 9 ай бұрын
Hi there @mr.mikesart7111 ! Jack here! Believe it or not, but electric setups generate quite a bit of heat as well! Especially if you run them right on the limit of their specifikations as we do😅 To mitigate this issue we ran two cooling loops from the impeller. One through the motor, and one through the ESC. As said, if you are willing to settle for a 'milder' tune, you could possibly get away without cooling, but since we want all the power we can get, cooling is our only option, unless we rebuild the setup with "over-speced" components. However that would add unnecessary cost & weight. Thanks for watching! Feel free to subscribe for more electric builds⚡ /Jack
@riadaljana Жыл бұрын
Hello brother, I admire you and your inventions. Honestly, I wanted to make like 3 transformers, but I couldn't. Can you help me? I'm in a village and we suffer from high fuel costs. I want such an engine, and I will be very thankful to you.
@johndehosson Жыл бұрын
Hi @Riadaljana! Would love to help, but unfortunately we don't have the opportunity for that! Thanks for watching! /John
@jchoneandonly Жыл бұрын
Definitely use a wider housing. Minimizes wear
@johndehosson 11 ай бұрын
Maybe yeah😅 Shouldn't really be necessary if you keep away from the mistakes we made... flipping the motor and mounting it directly to the bottom plate pretty much eliminated any alignment issues we had to start with! But yeah, maybe a few millimeters of extra clearance would be good, just so if any debris gets in it doesn't scuff up those beautiful motors🙃 Thanks for sticking around🍻 /Jack
@jchoneandonly 11 ай бұрын
@@johndehosson that's my thought. Always have a good bit of clearance
@jeffreymoffitt4070 Жыл бұрын
Im in the US. What watt motor is this? Looking for a comparable motor
@johndehosson Жыл бұрын
Hey Jeffrey! The electric motor used in the video is available on our website: marsons.se We ship world wide👍 We are also running a giveaway at the moment where you can win one of those motors! For more details check out this video: kzfaq.info/get/bejne/ZpeXZdJ13KnHpWw.html Good luck with your project! /Jack
@joesutherland225 9 ай бұрын
Tons of questions being a sparky motor hp voltage controller DC inverted to a c or not etc
@johndehosson 8 ай бұрын
Most things are in the vid, or the comments here @joesutherland225 . As a sparky you'd do really well with this stuff! /J
@wokitlikeyoutalkit5619 6 ай бұрын
Can we have a link to you 12kw motor?
@johndehosson 5 ай бұрын
@wokitlikeyoutalkit5619 Check out our website, www.marsons.se and you'll find it amongst "parts". /John
@_onesimpleidea Жыл бұрын
Nice conversion. Two questions: 1) Which videos (if any) explain the cooling system, and the motor specs? 2) Maybe my currency conversion was goofed up, but are you really selling a stand-alone electric motor (raw part) for $5,000 USD?
@johndehosson Жыл бұрын
Hey onesimpleidea! Jack here! 1) On this build we are cooling the motor of of the stock impeller in the bottom unit. We just ran some plastic tubing from the old water cooling pipes, to the inlet of the motors water cooling jacket👍 (The ESC and battery for this setup where air-cooled) You can find the specs on the motor here: www.marsons.se/marsons-omv1-zq5hxp 2) Yes, something must have gone wrong. The motor will cost ~500-550 USD (~5000 SEK) with shipping included, once it goes on sale😊 Sorry for the inconvenience, I will check the site to see if there is anything I can do. I hope this answered all your questions😊 Cheers🍻
@_onesimpleidea Жыл бұрын
@@johndehosson Hi. Thanks for the good reply. One suggestion -- next time it seems to fit when you're making a video, you should explain the cooling system in more detail. That part is not intuitive (squirting water on electronics). I know you're not really doing that, but how to keep those separate and make it function takes some explaining for anyone not already involved in your project.
@boathemian7694 Жыл бұрын
@@johndehossonlink doesn’t work btw
@johndehosson Жыл бұрын
@@boathemian7694 brand new website and shop coming within about 48 hours! Sorry about that!
@TomSepe Жыл бұрын
What esc are you using? & battery voltage?
@johndehosson Жыл бұрын
Hi Tom! More infor on ESC and battery config in the next two videos, and reasoning why. But in short, ESC: APD 28UHV, batteries 24S Lipos. Thanks for your question, hope to answer them in full in the coming vids! /John
@fredportelli3415 Жыл бұрын
what brsnd is the motor and were do you get the motor from haha
@johndehosson Жыл бұрын
Hey fred! Jack here. We are currently rebuilding our website, but you will be able to buy it from there as soon as it is back up. If you want to get one ASAP, feel free to email us at info@marsons.se, and we will be glad to help you that way. Cheers🍻
@puzzles111 Ай бұрын
what was the elect motor you used
@johndehosson Ай бұрын
Hey Puzzles! We sell this motor on our site here: marsons.se/product/omv1/ Since we are doing some work on our website atm it says "out of stock", but send us an email (info@marsons.se) and we will help you out🍻 Thanks for watching! /Jack
@deliuioan7222 9 ай бұрын
Salut ! Sunt din Romănia si poți sa-mi trimiți pînă la cel mai mic detaliu despre motor electric boat ? Kw ? V ? Ah ? Batery litiu ?...etc fenchiu !❤
@johndehosson 9 ай бұрын
Hi @deliuioan7222 ! Jump onto our website, where you will find all the products! www.marsons.se Have a great day! /John
@tilmaen 11 ай бұрын
I don't quite get how you cool the motor. Is it just air cooling and the air is cooled by having the hose go through the casing?
@johndehosson 11 ай бұрын
Hey there @tilmaen! Jack here! The motor is being water cooled. The plastic hoses you see run from the original piping of the bottom unit, from the impeller, up through the motors internal water cooling jacket, and out the back of the casing👍 Water cooling is absolutely necessary unless you run the motor at very low speeds! These things produce a lot of heat, and can potentially fry themselves within minutes if not cooled properly! Hope that answers your question! Thanks for watching🍻 /Jack
@NaughtyGoatFarm Жыл бұрын
Hey guys where can I buy the electric motor with bottom mount as recommended?
@johndehosson Жыл бұрын
Hi there! You can purchase the motor in the video, with the shaft bottom mounted, from our website😊 They are in stock so you should receive it quite quickly! You can order here: www.marsons.se/marsons-omv1-zq5hxp Good luck with your project! Keep us updated👍 Cheers🍻 /Jack
@oilio5465 Жыл бұрын
I can't access the site. What are the specs of the motor
@johndehosson Жыл бұрын
Hi @oilio! Shoot us an email, site is on its way atm👍👍 info@marsons.se 👍👍 /john
@fredportelli3415 Жыл бұрын
mate cannot find were to buy that motor are you for real tell me where to buy this motor i tryed your link it says not real
@johndehosson Жыл бұрын
Hey fred! Jack here. We are currently rebuilding our website, but you will be able to buy it from there as soon as it is back up. If you want to get one ASAP, feel free to email us at info@marsons.se, and we will be glad to help you that way. Cheers🍻
@stevenher7711 3 ай бұрын
what is the name of that motor and where can i get one for my 9.9 hp outboard.
@johndehosson Ай бұрын
@stevenher7711 We will have them back in stock soon. www.marsons.se Regards John
@henrybagley8507 8 ай бұрын
hello not clear to me is the electric motor cooled by the water from impeller if so HOW ? also what type of motor what did it come from or buy direct from where ?? what horse power etc
@johndehosson 8 ай бұрын
Hi @henrybagley8507 ! All info on hardware website: www.marsons.se Watercooled via impeller, check video for details, it is connected by hose :) Thanks for dropping by! /John
@terratrekker28 Жыл бұрын
Hey guys what is that specific motor and the specs? I may build one. I live on a sailboat and a set up like that would be nice. I make my own power thru solar for my home(sailboat). Would like to have an electric motor for my dingy vs my 6hp 4 stroke that I’m using now. Cost me $0 dollars to charge my lifepo4 battery banks including whatever battery I would use for the outboard. Thanks for your time
@johndehosson Жыл бұрын
Hi @Terra Trekker! Grab the motor via our website: www.marsons.se. Will do perfectly for a small dingy :) Have a great day! Regards John
@shawnhue4386 Жыл бұрын
probabily 12090 in 50kv-60kv range
@tackletestdummy9096 7 ай бұрын
do you have a link to the motor? I can't see where to buy one.
@johndehosson 6 ай бұрын
@tackletestdummy9096 All info and pricing for boats and kits coming soon to www.marsons.se /J
@tackletestdummy9096 6 ай бұрын
@@johndehosson would like to talk specifics about getting this into my custom boat build. What is your email?
@johndehosson 5 ай бұрын
@@tackletestdummy9096 shoot me an email via the website or info@marsons.se
@fredportelli3415 Жыл бұрын
you can buy them bottom mounted fro the factory but you cant get the link that works
@johndehosson Жыл бұрын
Hi @FredPortelli! Sorry about that, our website www.marsons.se is getting a complete rebuild at the moment! It will be ready in a couple of days!
@Servant_of_Christ 9 ай бұрын
I was wondering if that motor could replace my 8hp diesel in my sailboat? One of the causes of MS is insulin resistens, so if one cures that the effects of MS could be reduced. IR you cure with the carnivore diet, no carbs in and the problem goes away.
@johndehosson 9 ай бұрын
Hi @Servant_of_Christ ! Thanks for watching, and yes the motor could replace your sailboat motor. You can check out the specs here: www.marsons.se Thanks for your kind remark about MS, it is correct that diet/excercise/lifestyle have a huge impact on the wellbeing of a person with MS. I've basically eaten plant-based for years, and my physical ability is classed as "elite sportsperson. When I found out I had MS a few months ago, I educated myself extensively in the topic, and have trimmed a few things that i identified could be improved. Together with great medication, I am doing really well. Thanks again, have a great day! /John
@SvoyaDachaDIY Жыл бұрын
Какой мотор я так и не понял??? можно ссылку?
@johndehosson Жыл бұрын
Hi @Своя Дача DIY! The motor can be purchased on our website: www.marsons.se. The website is down for another few days, then we will be relaunching an entire new shop! Welcome to us then! /John
@GlenGlenervo Жыл бұрын
Where did you source the motor?
@johndehosson Жыл бұрын
Hi GlenGlenervo! Available on our website www.marsons.se They are in stock and ready for delivery.
@kellyrafferty7792 Жыл бұрын
Thank you for your reply so 50 kw still only gives me 3500 rpm max . My 70 hp outboard low rpm is 4300 . To 6500 full Throttle. I very much want to keep the ski value of my boat ! As much as I would like to go electric it just dose not compete with gas for power to movement ratio . Maybe someday electric will get there I just not seeing it now . Thank you again for the reply
@johndehosson Жыл бұрын
Cheers Kelly! Thanks for dropping round! If you beef up your battery voltage you will get the rpm you need, so don't give up on that electric dream!⚡⚡ and btw, our little waterskiing boat will be kitted with a massive electric motor sooner than later, so stay tuned!!💪💪
@kellyrafferty7792 Жыл бұрын
@@johndehosson wish I had some that truly understand electric to work with to make this possible. I will keep watching. Mostly I do not get power to drive ratio.
@jack-wl8uj Жыл бұрын
A more aggressive prop would be cheapest. Or 50% higher voltage and a new controller. New batteries must match profile of old ones. (Amps)
@jack-wl8uj Жыл бұрын
How about a Nissan leaf motor? 140+hp and 18,000 rpm will a jet drive. Safer, faster and you can buy a wrecked leaf cheaper than a new 70 HP new outboard. With a roof on boat go solar charging. Charges M-F ready Sat. Lol, free fuel forever.
@chasbrady2544 Ай бұрын
Where’d you get the motor?
@johndehosson 29 күн бұрын
Can be found on our website: www.marsons.se Cheers for watching! /John
@ceejfletcher Жыл бұрын
Where do the motors come from, how much are they
@johndehosson Жыл бұрын
Hi @Christopher T.! We finally have the info and pricing about the motors we have developed ready for our website on Monday. You're not the only one asking, so sorry about the pain!😅 Please check back Monday,, or jump on our mailing list for the info which we'll send out about this late Sunday night, early Monday👍 /john
@deadcrow6888 Жыл бұрын
What motor is that? I'm in the US what are the specs? Hoping to find somthing similar
@johndehosson Жыл бұрын
Hi @DeadCrow! Grab it on our website, www.marsons.se. They're in stock, along with the controller. Our new updated website along with functioning store will be up and running in a few days, so if you'd like to order, shoot us an email. Cheers for dropping by. /John
@PhilStrause Жыл бұрын
@@johndehosson The site seems to be down. Id love to know more!
@johndehosson Жыл бұрын
@@PhilStrause Brand new site and shop is being made as I write, and will be up and running within a few days! Just noooot quite there yet! But drop back soon, or blow an email our way and we'll let u known when it's released.
@doubleDdeke Жыл бұрын
Whats the price of that electric motor in US dollars? I’m not sure about the currency you use on your site
@johndehosson Жыл бұрын
Hi dedrick lemon! Jack here. Sorry for the inconvenience, we are working on a new webstore that will display pricing according to your location😊 For now the currency displayed is Swedish, SEK. You can still order a motor to anywhere in the world, but to find out the price you will have to goggle the current exchange rate. For USD, simply search "SEK USD" in google it should show the latest exchange rate👍 Again, sorry for the inconvenience, new store will be up and running soon😊 Thanks for watching! Cheers🍻 /Jack
@mikeknowlden9617 11 ай бұрын
What type motor where can someone acquire it hp torque cost (us) power supply speed controller these are questions I have
@johndehosson 11 ай бұрын
Hi @mikeknowlden9617 Thanks for dropping by. All the answers are in the description, video and comments 😁 You can check out controller and motor on our website: www.marsons.se Have a great day! /John
@ivarerickson8967 Жыл бұрын
My friend, I owner a Marine Company in Miami, Nordika Marine Corp. I wanna buy one from you, is it possible?
@johndehosson Жыл бұрын
Hi @Ivar Erickson! Get in touch with us via our website Marsons.se and we'll be happy to help you out. /John
@ComputerSystemTweeks 5 ай бұрын
What size Outrunner
@johndehosson 5 ай бұрын
Check the "Parts" on our website www.marsons.se for all specs @ComputerSystemTweeks 👍👍/John
@gerlandkent6377 Жыл бұрын
[I, WOULD LIKE TO BUILD ONE OF THESE OUTBOARD MOTORS TO. I, WOULD HAVE TO GO WITH A BIGGER HP ELECTRIC MOTOR FOR A 23FT. CABIN FIBERGLASS SEARAY BOAT. IM. GOING TO SHARE THIS VIDEO WITH 2 OF MY BOAT FRIENDS TO. THANK, YOU FOR YOURE VIDEO.]👍
@johndehosson Жыл бұрын
Hi @Gerland Kent! Thanks for dropping by, and for sharing our vids! Make sure to participate in our competition for one of the motors in the other video! /John
@davidrabin7287 11 ай бұрын
Where is the link 2 d engine ? .
@johndehosson 11 ай бұрын
@davidrabin7287 www.marsons.se. 👍
@jimbendtsen8841 Жыл бұрын
learned
@johndehosson Жыл бұрын
@Jim Bendtsen: Thanks for dropping by! Make sure to participate in our competition for one of the motors in the other video! /John
@donpatton1 Жыл бұрын
what type of a motor is that?
@johndehosson Жыл бұрын
Hi @Don Patton, You can pick it up on our website, www.marsons.se 👍👍
@KristyKuang-je1yf 3 ай бұрын
Can you tell me the parameters of this motor? I want it too.
@johndehosson 2 ай бұрын
Hey mate! Doing a bit of work on our website at the moment, so for motor purchases, please hit us up using this email adress: info@marsons.se We ship world wide😊 Cheers🍻
@gmansmith1907 Жыл бұрын
What is the purpose of the water pump?
@johndehosson Жыл бұрын
Hi @Gman Smith! Watercooling the motor . /John
@kellyrafferty7792 Жыл бұрын
How do I determine what motor I need for a 70 hp drive unit ?
@johndehosson Жыл бұрын
Hi @kelly Rafferty! Check out our video "Make your own electric outboard! Choice of Motor and ESC!", this should point you in exactly the right direction. Feel free to message with any further questions, you can get hold of us pretty much anywhere :) /John
@jack-wl8uj Жыл бұрын
750 watts =| hp. So you need a 5o kw (50,000w) electric motor.
@Atheist66644 15 күн бұрын
no one has ever said how long the batteries last in these videos
@johndehosson 15 күн бұрын
@Atheist66644 Thanks for dropping by! Check out our range test here: kzfaq.info/get/bejne/d8WAaLJ32NjIeKs.html Hope this answers your question! Have an awesome day! /John
@tonyrebeiro 10 ай бұрын
To increase the efficiency and finally the autonomy, it would have been better to put the motor in a Pod and have it directly drive the propeller, under the boat.
@johndehosson 9 ай бұрын
Hey there @tonyrebeiro ! Jack here! I fully agree! Pod motors are the way to go. HOWEVER, they are more difficult to build for all the DIYers out there, and so far, we haven't found a pod off the shelf that is powerful enough for our needs. When we do, you can bet that we will switch to it! We are as a matter of fact testing a few now, so we will have a video out in a few months concluding our tests! Subscribe⚡⚡ Thanks for watching! /Jack
@edwinrivrera6847 Жыл бұрын
plans to instalhomemade gheenoe and put a electric motor inside plans
@johndehosson Жыл бұрын
That'd be awesome @Edwin Rivrera
@u812green7 10 ай бұрын
Why even keep the impeller at all instead air cooled?
@johndehosson 10 ай бұрын
Thanks for your idea @u812grern7 , but air cooling isn't enough for our application, so we use water-cooling🍻😅
@Chris-dw5ty Жыл бұрын
Don't start you're bolts with impact or screw gun. Great video guys, that just got me
@johndehosson Жыл бұрын
As we say in oz: "Gotta risk it to get the biscuit" @Chris 😂 Thanks for dropping by, love having you here😂
@gilbertcordina Жыл бұрын
Can you use it in saltwater?
@johndehosson Жыл бұрын
Hi @Gilbert Cordina! I'd say that would be fine. Check electric corrosion, use an anode, and possible separate cooling with a heat exchanger and this would be a sure fire way to do it in saltwater! Thanks for dropping by! /John
@grumpysmurf74 10 ай бұрын
what did it all cost
@johndehosson 9 ай бұрын
Hi @grumpysmurf74 ! Not sure if I actually have a total cost on this one, but if you check out our website www.marsons.se you can get the motor and controller price (at least the controller we are using now). Have a great day! /John
@user-sy8js4uq4c 2 ай бұрын
Batteries?
@johndehosson Ай бұрын
Howdy @user-sy8js4uq4c ! THere is a vid about the battery build for this 👍Have a great day! /John
John de Hosson
Рет қаралды 13 М.
SmarterEveryDay
Рет қаралды 24 МЛН
Lilsnoop213
Рет қаралды 74 МЛН
Crafts people
Рет қаралды 6 МЛН