Make Your Own Rocks With Rapid Set Cement All | Art Stones For Painting
Рет қаралды 27,657
Күн бұрынNEW tutorial on how to make your own rocks with Rapid Set Cement All! I’ll show you 2 ways to create art stones from Cement All. They are perfect for painting mandalas and other art. This mixture is a super cheap alternative to UltraCal 30. If you are wanting to make your own stones or rocks for painting mandalas or kindness rocks then you need to watch this video! It's so much easier than you might think. What you see here is my first try with this material. I really didn’t mind the process either. Ill be using this entire box. If you aren't sure where to get these supplies, visit my website for all the links. www.jadelrocks.com and go to the Art Desk!
Here's another way to create your own rocks using UltraCal 30
• How to make your own s...
Join this channel to get access to perks:
/ @jadelrocks
Watching the full video is still the best way to support my channel. Of course with a little like, subscribe, comment and share... However, sometimes you just gotta find what ya gotta find. So here's some timestamps to help you navigate this video:
⌚ Timestamps 👇🏻
00:00 Cement All Rapid Set
00:10 Safety Info
00:23 Supply List
01:11 Begin Mixing
02:07 Pour into molds
02:56 Getting the bubbles out
03:35 After 2 hours Drying
03:52 Removing from Molds
05:07 Smoothing the backs
06:18 Tweaking the Process
06:28 New ratio of mix
07:37 After 1 hour Drying
07:53 Mold Release DIY
08:07 Easy sanding
08:33 Dry and DIY
Key Supplies 👇🏻
www.jadelrocks.com/art-desk
I purchased this Cement All at Home Depot
__________________________________________
⚠ DISCLAIMER:
I may earn commissions for purchases made through the links below. As an Amazon Associate I earn from qualifying purchases at no extra cost to you.
Spatula on Amazon 👉🏻 amzn.to/3HyMhuQ
HDC Mold on Amazon 👉🏻 amzn.to/3I0Ub1H
HDC 3" Mold on Amazon 👉🏻 amzn.to/3wXimaT
Tea Light rock mold on Amazon 👉🏻 amzn.to/3IBDgmk
__________________________________________
Standard Video Info 👇🏻
🎨 All of the supplies I use are on my art desk on my website. 💻 www.jadelrocks.com
Check out the links below for more ways to contact me! I read every comment too so feel free to leave one. 📺 New videos are always at 5:15 am CST. Other videos released at random so ring the notification bell. Come have some coffee with me and let's make this world better one rock at a time!
💜 JaDeL Rocks Channel Is about:
Mandala tutorials, kindness rocks, dot art with all the swooshes and swipes, dotting fun, products like Resin and Varnish, acrylic paints, glitters, and just about anything you can think of to do with rocks. I'm just scratching the surface! Stick around and laugh with me as we make this world a prettier place.... one rock at a time! Just Remember: It's not Perfect... It's ART!!!! #mandala #DIY #rockpainting
Contact me :
🔵Like me on Facebook at JaDeL Rocks
/ jadel-rocks-1072664444...
💙Friend me on Facebook at Ja DeL
/ ja.del.71271
🛒 eBay at jadelrocks
www.ebay.com/usr/jadelrocks
🛒 Etsy at Jadelrocks1
etsy.me/3KRx0X9
🛒 Check out my Stickers: / @jadelrocks
🔷Follow me on Instagram at jadel_rocks
/ jadel_rocks
💻 Website: www.jadelrocks.com
(Visit the Art Desk for more info on my tools.)
📫 Address
P.O. Box 9023
Gosnell, AR 72319
🅿 Donate
www.paypal.com/donate/?hosted...
@JaDeLRocks Жыл бұрын
How to make your own stones using UltraCal 30 | DIY Rocks kzfaq.info/get/bejne/gNiTYMmLr7vPqo0.html
@SusanNelsonCreations Жыл бұрын
Good video ❤ Just a tip as I have been making these for years and learned the hard way lol If you rinse your moulds is a light soapy bath just before you pour the mix the bubbles will not form on the top of your rocks and a lot less on the sides. I also remove from the mould right after it sets (30-45 min) when the rock has just set it is so much easier to lightly sand the bottom and the damp dust fills into any bubble marks. I use Hydrostone now and I don’t need to sand much at all. But with cement and Ultracal 30 I did. Anyway just a couple of tips I learned . ❤❤❤
@JaDeLRocks Жыл бұрын
Perfect tips!!! After I made this video I forgot to rinse my molds. I noticed when I set up to make another batch. I tossed them into a bucket of water with a little soap and I thought 💡 I just shook them off and didn’t rinse. I was feeling lucky smart. Lol!! I’ve never heard of Hydostone… I’ll check it out. Thank you so much for sharing your knowledge. You are so kind for that. ♥️♥️♥️ You rock 🤗
@SusanNelsonCreations Жыл бұрын
@@JaDeLRocks love your art and it’s been fun watching your journey :) Hydrostone is harder then Ultracal30 and yet softer and smoother to touch :) good for difficult shaped moulds.
@JaDeLRocks Жыл бұрын
Thank you very very much. That’s my one concern with ultracal is that it seems so fragile. I’ll definitely add hydrostone to my list. That never ending list 😆 Again, thank you so much ♥️
@JaDeLRocks Жыл бұрын
Would you mind if I added your channel to my featured channels? I’d be honored ♥️
@SusanNelsonCreations Жыл бұрын
@@JaDeLRocks oh my that would be lovely ❤️
@klairbaranek Жыл бұрын
Can’t wait to try it
@JaDeLRocks Жыл бұрын
Awesome ♥️😎
@captm9025 11 ай бұрын
Excellent production value. Top notch.
@JaDeLRocks 11 ай бұрын
Much appreciated! Thank you very much. I was pleased with this one. They turn out so well when I’m having fun and I actually was having fun 🤗♥️
@joyceshotwell4727 Жыл бұрын
I have not yet tried making my own rocks but the thought has crossed my mind since I use only rocks I have found on the beach. Thanks for this info.
@JaDeLRocks Жыл бұрын
I would love that so much 😍 I have a few rocks from the beach when we went last summer. I turned one into a keychain or zipper pull for my daughter’s backpack. I’d love going rock hunting if only I was closer.
@DrewMedina 22 күн бұрын
Love the video! Thank you
@JaDeLRocks 22 күн бұрын
Awesome, thanks Drew ♥️
@JaDeLRocks Жыл бұрын
Good Morning... ☕️ I hope you enjoy this one. I’m loving the CementAll. A couple of more batches and the box will be empty. I’ll come back and add to the description how many stones I get out of this box.
@emmakrueger7704 Жыл бұрын
Awesome‼️Yesterday told my husband how lucky he is that instead of saying let’s go to the jewelry store and buy me a diamond, I say, “Let’s go to Home Depot and buy me 55 lbs of Cement All.” And we did! Hahaha 🤣
@JaDeLRocks Жыл бұрын
Lol!!!! There’s a running joke in the family about gifting concrete. When Dad was alive, any time you asked what he wanted for birthday or Christmas or Father’s Day… concrete! We’d all roll our eyes. It turns out he was tired of mowing 😂😂😂😂 I think his goal was to concrete the yards 😂😂 oh I guess you had to be there. But now I’m buying concrete and my mom just Facepalms 😂😂♥️♥️
@JaDeLRocks Жыл бұрын
@@emmakrueger7704 OH... and tell that hubby that I said he's lucky to have you for all sorts of reasons! LOL, I suspect he already knows that! Love it y'all!
@AllenArt64 Жыл бұрын
@@JaDeLRocks Just remember to buy cement and not concrete. Concrete has small rocks and pebbles in it and cement doesn't ;)
@JaDeLRocks Жыл бұрын
You are so right!!! This is why it took me so long to try. I had only seen the concrete my dad used on the walks. I thought everyone was nuts using that 😂😂😂😂 I never knew you could get it without chunks of gravel in it. This rock painting stuff is going to make me a jack of all trades. Thank you for the tip. I’m not sure I knew the wording difference.
@misskrissdee Жыл бұрын
I've seen this cement mentioned before, but haven't tried it. I do use a lot of ultracal 30,so I may need to see about getting some of this. Looks easy enough to process. Thank you for the great tutorial! 😍
@JaDeLRocks Жыл бұрын
Awesome… Good luck.. 🤞🏻 it’s totally worth a try.
@lorrainemclay3343 Жыл бұрын
Excellent video. Thanks so much. 😃🌈👏
@JaDeLRocks Жыл бұрын
I’m so glad you found value in it… I think it’s me that should be thanking you Lorraine… Thank you ♥️
@user-hr2ro9fi7r 3 ай бұрын
A helpful tip to avoid bubbles is to only start stirring after all the cement has been added to the water.
@JaDeLRocks 3 ай бұрын
Thanks 😊👍🏻
@scrappky Жыл бұрын
I have never heard of Cement All, I have been using UltraCal 30. You also may be getting a lot of bubbles with the vigorous stirring with the spatula. I think I saw a recommendation on the Happy Dotting Company to use your gloved hands to mix it up. You can feel any lumps and know when it has all been mixed up without adding bubbles with all the vigorous stirring. Just a thought! Thank you for all your videos!
@JaDeLRocks Жыл бұрын
Yep, that's exactly how I mix the ultracal too! I'm trying to move over to reusable gloves... so I'm trying new things to cut down on my waste. I was wondering if I shouldn't try working the bubbles out of the bucket before pouring. I'm glad you reminded me about the glove stir... I'll try to be more gentle. The 15min setting time had me intimidated, LOL>
@carlacapps6092 Жыл бұрын
Hi. Ty for your videos!
@JaDeLRocks Жыл бұрын
I’m so glad you like them… Thank you for watching Carla, it means a lot 🤗
@nancycharlton1803 Жыл бұрын
Hi there. I've been using a product called Perfect Plaster for my molds. I use the measure by weight method. I've never had bubbles form on the top of the molds. My biggest molds, when they are dry are only 6.5 oz. This works well for me because I live and craft in a motorhome. We have to be careful of how much weight we carry. Joann's carries Perfect Plaster and so does Amazon. Joann's is a better price, especially if you have a coupon. 😃💓 Your tutorials are always informative. Thanks again.
@JaDeLRocks Жыл бұрын
Great tip! I’m going to have to try that someday. Are they very fragile? I love that you do this in a motor home. I swear some day I’m going to travel and take my rocks with me! Sounds amazing.
@Lyn4817 Жыл бұрын
I had to laugh, I don't go shopping anymore due to mobility issues. I asked my husband to get me a pack of this Quick Set Mix and he came home with Mortar Mix, which I still haven't tried btw. I hit pay dirt a couple of weeks ago and finally I could buy Ultracal 30 in a 5kg pail at a good price, online. The only down side was the freight as I live regionally in Aust so freight is just our way of life if we want something different. I can't wait to make some of my rocks with it.
@JaDeLRocks Жыл бұрын
Right on! Ultracal is still my fav. You’ll like it. I can’t wait to see what ya come up with. Good luck.. 🤞🏻
@Jodysfunstuff Жыл бұрын
I love using cement-all as I holds up very well. Especially for those outdoor projects. I haven’t use hydrostone yet but going to look into that. Not sure of the cost.
@JaDeLRocks Жыл бұрын
I was hoping you’d see my video… you told me about cement all for ever ago. I finally did it 💪🏻 Glad you’re home and back at it soon! Can’t wait to see more. Thanks for watching 🤗
@Jodysfunstuff Жыл бұрын
Thank you. I’m very curious to see which is the most cost effective. I’ve never used Ultracal or hydrostone but I’m thinking they are more costly?
@JaDeLRocks Жыл бұрын
@@Jodysfunstuff I can tell you that cement all is far cheaper than ultracal. I’m not quite finished with the box I bought but it looks like it’s going to make the same or more as my $30 box of ultracal. I think the cement all cost me 17.
@CraftHarlot Жыл бұрын
Thanks so much for showing your process! I have been using Cement All for my castings. Its super cheap at home supply big box stores - about $14 for 25 lbs, and $20 for 55 lbs, but i can't carry that much! The cement block to use for sanding the backs is a brilliant idea!! My mixture is much thicker - I've been doing 4:1. I mix with my hand, wearing a disposable glove. Then i just scoop the mix into the molds with my hand. I'm going to try a pourable ratio next time since yours turned out so well. Have you had any problems with them cracking?
@JaDeLRocks Жыл бұрын
That’s awesome! I haven’t had any problems with cracking at all. So far my only problem with cement is the tiny holes are impossible to paint. Lol, with ultracal 30 the paint seems to absorb into every fine hole. This cement isn’t having it 😂 I paint them black and instantly see every tiny hole. I’ve got to get better at bubble removal. But you’re right… you can’t beat the price for sure. I got a little box because that’s what I could Cary too 😂😂😂 I think it was about $14.
@kathiealfstad Жыл бұрын
Very easy instructions to understand. I would like to know how to make the rocks with a circle in the middle to add a tealight or votive candle?
@JaDeLRocks Жыл бұрын
Hi Kathie! I'm so glad you asked. I didn't think to include the tea light mold in the description. I just added it to the description of this video. You will make it the exact same way... just using a different mold. That mold is now in this video description in supplies. Good luck and I'm so sorry I didn't think to add it. You rock :)
@susanpettit8751 Жыл бұрын
Hey there - I have tried Cement All too. I found that I went through it really quickly compared to the Ultra Cal. (Maybe it was because I could only get a small bucket. I am lucky though - I can get the 50 lb bag at a art store for about $36 CAD . (In Toronto). Thank you for a very helpful video!!!
@JaDeLRocks Жыл бұрын
Awesome! I have a bit more to go in this box but I’ll report back in the description how far this went making these. I think this box cost me about $17 USD Do you have any tips from your experience?
@susanpettit8751 Жыл бұрын
@@JaDeLRocks I actually didn’t follow the exact recipe on the box because it was too watery - ended up putting in more of the mix to make more of the consistency of the UltraCal. Maybe this is why I went through it a bit faster. The stones were fine - no bubbles and were easy to paint on. The 25lb box of Cement All cost me about $25 CAD. So the Ultra Cal for 50lb box at 36 was more economical.
@Jodysfunstuff Жыл бұрын
I put mine on a lazy Susan then Lift it to tap the bubbles out. You could use a board too. That way you are taping all at the same time. I also use a soap spray I the molds to help with the bubbles,
@JaDeLRocks Жыл бұрын
Awesome… so far the bubbles are bothersome. I’m getting better at it I think
@arranodoherty4372 Ай бұрын
Just water with a touch of hand wash be ok to sprqy
@kristinebalena3969 7 ай бұрын
This method im sure i can do!
@JaDeLRocks 7 ай бұрын
You can do it! This really was easy. I have found since the video that you can add even a bit more water and it helps let the bubbles rise. Good luck.. 🤞🏻
@kristinebalena3969 7 ай бұрын
@@JaDeLRocks 😊 thank you for the tips
@rosellenf.8339 Жыл бұрын
So glad you made this video, as I haven't yet tried this Cement All but ready to ! The 2nd time around with the 3.5 added instead seemed to do the trick. They came out awesome ! Was wondering, how long did they take to fully dry before you were able to paint on them and do you think they were much heavier than when using the UltraCal30 ?
@JaDeLRocks Жыл бұрын
I let all my stones dry at least 5 days. I truly think these were dry sooner… maybe 2 days even. They are heavier than ultra cal. My large stones typically weigh 14-15 Oz using ultracal when dry. These are about 19 Oz. But I feel like they are stronger. Like.. I’m not scared to drop one 😂😂😂. The trick to remember is only letting them in the mold for one hour and sanding bottoms right away. The longer they dry the harder that gets. I did like the 3.5 to 1 ratio the best!
@AllenArt64 Жыл бұрын
A good way to tell if they're fully dry is to set one on a sheet of paper and let it sit for about 10 minutes. If the paper is damp where the piece was sitting, it still needs to dry some more :)
@dcinkc58 Жыл бұрын
@@JaDeLRocks Great job on the video! I did drop one I made with Quikrete on the sidewalk once and a chunk broke off so they definitely are not indestructible. Spraying the molds lightly with water and a bit of dishwashing liquid and then tapping out the excess liquid before pouring really does help a lot with minimizing bubbles!
@JaDeLRocks Жыл бұрын
@@dcinkc58 yes! Thank you ♥️ I’m loving all the tips and knowledge.
@tinamcelyea5972 3 ай бұрын
I think a vibration plate would help a lot with the bubbles. Amazon has mini ones.
@JaDeLRocks 3 ай бұрын
That absolutely works!! I’ve seen it so I know you’re right. I started mixing it with more water and it’s as if it now allows the bubbles to float up. I’m just curious at how thin you can get the ratio before it doesn’t work. So far, just a tad more water doesn’t seem to change the outcome but it fixed my bubble problem.
@tinamcelyea5972 3 ай бұрын
@JaDeLRocks thank you for replying, and I'll try a tad bit more of water.
@JaDeLRocks 3 ай бұрын
I’m thinking I’ll try a vibration plate too… Thank you ♥️
@frangoodrich8243 Жыл бұрын
🤩🤩❤❤
@JaDeLRocks Жыл бұрын
♥️🤗
@jzuehl1 2 ай бұрын
Cementall is SO much cheaper than Ultracal 30 and dries really fast! I was having trouble with it setting up too quickly for me to work with so I've been putting the mix and water into a gallon ziploc bag, squishing it with my hands to get the lumps out and then cutting the corner off and filling my HDC molds. This is working really well for me but you can't do a ton at a time.
@JaDeLRocks 2 ай бұрын
It really is a good deal cheaper. I was quite pleased with the quick drying. What took me days with ultracal took 1 day with the cement all. Once I added more water it was amazing without all the bubbles. Once I run thru all my different mixes on hand I’ll probably order more.
@ritasklarchuk1819 Жыл бұрын
I'm new here🙂 and wondering if there's a hole on the top side of the rocks made in the molds. I live your videos By the way.
@JaDeLRocks Жыл бұрын
Thank you Rita ♥️♥️ yes, there’s a tiny hole in the center of the molds so that your stone has a center marker. You can easily pop it off or leave it. It’s such a huge help so that you don’t have to locate the center.
@user-qe1lx6dl9h 8 ай бұрын
What will you do with the ones that had so many air bubbles? I got my first rapid cement stone out today. I let it sit over night in the mold. But looking at your video you took it out 1 hour later. I was afraid it would break or not be set up enough. But my stone is beautiful. Just don't know how much effort it will be to sand the back. Thank goodness these are for family! But I still want them to be nice. Any help would be appreciated!!!
@JaDeLRocks 8 ай бұрын
The best answer for bubbles is to not get them lol. Thinning the mix a tiny bit more with water should do it. Also.. people have suggested rubbing the stone with spackle to fill holes. I just painted mine and owned it. You can leave them in molds for longer. I only pull them out early so that sanding is easier.
@user-qe1lx6dl9h 9 ай бұрын
Can you put them in the oven on a low heat to help dry them faster?
@JaDeLRocks 9 ай бұрын
I’m not sure on that… I did put my ultracal stones in a food dehydrator once, lol. Didn’t seem to make much difference I guess since I never did it again. You may want to see what the makers of this product says and that it’s safe to heat and make sure heating it doesn’t release any weird chemicals or stuff like that. Just be super safe because ya never know.
@brendabroschard5781 10 ай бұрын
Just a thought...if you stir slower there will be less bubbles. Any bubble holes can be filled with spackle. Still much cheaper than UltraCal 30.
@JaDeLRocks 10 ай бұрын
At this moment this is my 2nd pick. For the price and the ease of making I would totally recommend. You know your stuff Brenda ♥️ rock on 💪🏻
@wildroseranch1 Жыл бұрын
Happy dotting has measurements for each of her molds but how do you figure out how much to make for any other mold
@JaDeLRocks Жыл бұрын
I had the very same issue and question! Thank God for HDC telling us how to do theirs with Ultracal 30! So, on this Cement All? The directions just give you a a ratio like shown in the video. I just made a batch and took notes. There's no real way to do it other than trial and error. Find the ingredients for the mix for the manufacturer and make a batch and see what it fills up. Please check these numbers but I believe that Ultracal 30 is 38 parts water to 100 parts Ultracal 30 by weight. The Cement all is 4 parts CementAll to 1 part water by volume (measuring cup). I hope this help? Let me know if it doesn't and I'll try again :) Thanks for commenting LaVana... it's a valid question and one that I think we all have. I just used trial and error until I got it right.
@donnadobbins4295 5 ай бұрын
How much does it typically take for the stones to completely dry before sealing and painting?
@JaDeLRocks 5 ай бұрын
If you watch my ultacal video it shows how I come to the conclusion of drying time. With that said.. I always wait a minimum of 5 days. However, I don’t think that’s necessary with CementAll. The label says differently. I just do it out of caution. Here’s the other video. kzfaq.info/get/bejne/gNiTYMmLr7vPqo0.htmlsi=WS-6kzkTXERGCWPF
@cindyince2771 Жыл бұрын
Hiya, I did it! I finally tried it. I've had all the items for about a month now. The tops of my stones look fantastic, the bottoms were a mess. I was afraid of over filling and ended up under filling them. I found the cement thickened up really really fast. I didn't have much time to fill the molds. Looking forward to trying again. Really addicting lol. What size measuring cup did you use? Thanks for the vido
@JaDeLRocks Жыл бұрын
Great job! It really did dry fast didn’t it. My results were the same. On my second try I added a little more water. Taking them from the mold earlier made it way easier to fix the back. They look good after painted though. Lol. If you learn any tricks along the way you e gotta share ♥️ I’m pretty satisfied with the results except for bubbles. This cement doesn’t absorb like ultra cal does so it’s almost impossible to get paint in the tiny holes. I’ve tried the soapy mix and that did help. No one would probably notice but it drives me nuts lol. Have you tried using your member features? I think you get customized stickers to stand out in chat?
@cindyince2771 Жыл бұрын
@@JaDeLRocks I don't really know how to use them
@JaDeLRocks Жыл бұрын
I’m going to have to work on that. Check out www.jadelrocks.com/channel-members
@beautybumpcasting8297 Жыл бұрын
How long does it need to dry before it can be painted please?
@JaDeLRocks Жыл бұрын
I painted one the next day because I was curious. However, I recommend waiting at least 3-5 days. You really don’t want lingering moisture to try and evaporate through your paint job. It’s one of those things where it’s probably fine but wait just in case 😉
@ilsonnascimento5160 Жыл бұрын
Amazing video!! I have a doubt, Cement All is same Cement Grout? Thank you?
@JaDeLRocks Жыл бұрын
I’m not entirely sure… grout is another thing I think.
@ilsonnascimento5160 Жыл бұрын
@@JaDeLRocks Ok. Thank you!
@relevant.c5411 Жыл бұрын
1st one reminds me of a sand dollar
@JaDeLRocks Жыл бұрын
You’re not wrong… boy this would be great in some sand dollar molds. Lol, wouldn’t even have to paint eh?
@darlenemikkola5239 Жыл бұрын
I may have to start stocking up on some molds so I can try making some when the weather is warmer……and I’ll definitely need to find a concrete stepping stone. Lol. Why did you decide to try a new product for making your rocks?
@JaDeLRocks Жыл бұрын
Yes definitely stock up… it makes this go so much faster. I will still use UltaCal as I have a huge box. The price difference between the two can’t be ignored and I’ve had soooo many requests to do this over the past year or so. I’m actually quite impressed with this.
@darlenemikkola5239 Жыл бұрын
@@JaDeLRocks great information to share!! I bet you will be helping a ton of people with such a wonderful video❤️❤️. You are so devoted to your fans😍😍. I hope you have a beautiful week, rock star🤩
@JaDeLRocks Жыл бұрын
@@darlenemikkola5239 I was having electric issues… I’m finally back on the grid. Sorry for my late response. It’s such a mess around here. I hope you’re having a better week than me so far 😂😂😂
@darlenemikkola5239 Жыл бұрын
@@JaDeLRocks awwwwww, I hope you’ve weathered the worse and now each day starts getting brighter…. sending positive vibes❤️❤️❤️
@yolizcalderon9237 3 ай бұрын
Hola y en cuanto da cada pieza
@JaDeLRocks 3 ай бұрын
I’m not sure I understand the question.
@yolizcalderon9237 5 ай бұрын
Disculpen después de desmoldarlas se echan en agua para curarlas o no?
@JaDeLRocks 5 ай бұрын
No, I don’t.
@yolizcalderon9237 4 ай бұрын
Yo creo que si
@JaDeLRocks 4 ай бұрын
I really don’t. I remove them from the mold, sand the backs, and allow them to dry for several days before painting.
@yolizcalderon9237 4 ай бұрын
@@JaDeLRocks no entiendo nada ingles solo hola
@JaDeLRocks 4 ай бұрын
@@yolizcalderon9237 ♥️👋🏻😊
@antonellapalamenghi7563 8 ай бұрын
Dove si acquistano le forme in silicone che usate in questo video?
@JaDeLRocks 8 ай бұрын
There are links to everything in the description ♥️♥️♥️
@monicakelly5362 Жыл бұрын
If you were left handed that twisty tie would have only gotten tighter! I always do this
@JaDeLRocks Жыл бұрын
🤣so true!!! I’d never thought of this. I think you’re the only one that appreciated that. Thank you ♥️ you get me 🤗
@monicakelly5362 Жыл бұрын
@@JaDeLRocks I get you alright! Your art is awesome.. I have paint all over my phone now, attempting to paint all the rocks from my sisters garden with a chop stick and a q tip..just until my real tools arrive! You are soooo inspiring❤️
@JaDeLRocks Жыл бұрын
@@monicakelly5362 awwwwww right on Monica!! I can’t wait to see what you can do. It’s really a blast.
@ennelle2024 10 ай бұрын
They can also be removed after 45 minutes
@JaDeLRocks 10 ай бұрын
I did that the last time.. I just made one and it was still warm. Removed it just fine. So awesome.. it even sanded super easy. You rock!! Thank you ♥️
@ennelle2024 10 ай бұрын
Air bubbles = over mixing. Or too thick. It is best to not create a big batch but do 2-3 at time.
@JaDeLRocks 10 ай бұрын
You are completely right! I learned the hard way. But so so true, Thank you ♥️
@4614Maria 5 ай бұрын
Da molto tempo sto cercando di capire a quale prodotto corrisponde il 'Cement-all' in Italia... Puoi aiutarmi? Grazie 😊
@JaDeLRocks 5 ай бұрын
Hmmmm, let me research…
@JaDeLRocks 5 ай бұрын
I’m struggling because I can’t read the language but I think it’s still called CementAll. I found info in you language… I think. 🤔 www.materiae.it/cement-all.html
@4614Maria 4 ай бұрын
@@JaDeLRocksgrazie infinite, le tue informazioni sono state più esaurienti di quanto potessi aspettarmi! Avevo acquistato presso un rivenditore di materiali edili, un prodotto che loro chiamano 'Malta' che asciuga in 48 ore (costo per 5 kg. = Euro 1,60 molto poco) ma non l'ho provato non essendo sicura che fosse il prodotto adatto! Ora con le tue informazioni posso fare una ricerca più mirata 😊
@JaDeLRocks 4 ай бұрын
I’m so glad. I was trying so hard. I think it’s amazing that we can chat with little barriers in translation. The internet wasn’t so easy 😂 Good luck.. 🤞🏻
@4614Maria 4 ай бұрын
@@JaDeLRocks True, I agree 😁
@mcdonald1447 Ай бұрын
So this maybe weird for some folks, but do you think this may work with mixing some of my pet ashes into the mix and possible some fine glitter and white paint? We have many pet urns sadly, and instead of the urns would like to create like a little river rock area of all their ashes in the stones. I am not a painter but would like the stones to be white. Any help would be appreciated as I don’t want to experiment too much as their ashes are precious. Thank you for your video it is really good.
@JaDeLRocks Ай бұрын
Oh this is interesting but I can see what you are wanting. I don’t have a clue but I do know there a pigments you can get for cement but I’m not sure about white. Maybe experimenting with some wood ash might give you the info you need. We burry our pets but I do have memory stones I’ve painted so it’s not as weird as it initially sounds. Good luck.. 🤞🏻
@JaDeLRocks Жыл бұрын
My SECRET to smooth rocks! How to sand cement! | DIY Rocks kzfaq.info/get/bejne/d6ddg7OZ0M27l2w.html
fauxrocktraining
Рет қаралды 409 М.
JaDeL Rocks
Рет қаралды 9 М.
Amandala Dot Painting Rocks
Рет қаралды 22 М.
Uniquely Ursula
Рет қаралды 1,2 МЛН
Miranda Pitrone Art
Рет қаралды 23 М.
Olympics
Рет қаралды 23 МЛН
НОВЫЕ ВАЙНЫ
Рет қаралды 10 МЛН
BYB Academy
Рет қаралды 62 МЛН
Hana Shorts
Рет қаралды 7 МЛН
Lady Milana&PAP
Рет қаралды 2,9 МЛН