Make your own silicone gasket

No video

Make your own silicone gasket

Рет қаралды 20,143

Күн бұрын

Need a new gasket for something, learn how to make your own food grade silicon gasket cheaply and easily.
Food Grade Silicone: www.amazon.com...

Пікірлер: 31

@steve-adams Жыл бұрын

Beautiful work! I’m making a much smaller gasket but the technique will transfer perfectly. The only source of the gasket I need that I can find wants about $50 CAD before taxes and shipping. Going into this I thought I might be spending more like $5… So this seems like a good skill to build.

@allenrobins 4 күн бұрын

thanks for a great idea and video 😊

@michaelrobinson9643 Жыл бұрын

I'm trying to make a gasket for a tactix storage box to use as a vacuum box to store 3d filament which is hygroscopic. Normally I have success using cling wrap on the box then expanding foam in the lid and lock it down. It's not working so I decided to try silicone using vasoline as a separating agent on the box. I didn't leave it long enough to cure (needs more than 3 days due to depth of cure apparently! Big mess and I suspect I'll be needing to rip it out. I've learned a lot from your video in terms of ideas - thanks :).

@eosme 2 жыл бұрын

what a great idea! i needed a gasket for my espresso machine, which no silicon gasket is available. this will be a fun DIY.

@muhammaddarwish7909 Жыл бұрын

Did it work?

@re3003 Жыл бұрын

How did it work? I'm here because I've also got a vintage espresso machine that I need a group gasket for

@nickgenericusername 7 ай бұрын

wildly late to the convo but you might be able to find food-grade silicone SHEETS that you might find easier to cut smaller gaskets from :)

@bobbiefenton5031 Жыл бұрын

If making a food grade gasket, use beeswax not candle wax.

@ThankGood123 5 ай бұрын

Thank you.

@IamKittySweets 2 ай бұрын

nice video thanks

@paulc9892 Жыл бұрын

The Amazon link is broken. What is the make and model of the silicone? Or could you post a New link? Thanks

@jst1man 2 жыл бұрын

This helps allot. Thanks

@dropbearbrewery9032 2 жыл бұрын

Your most welcome,

@jimwyatt6652 2 жыл бұрын

Well done 👍👍👍

@anthonybrea5631 Жыл бұрын

I don’t see the link for the silicone?

@doc-holiday 3 жыл бұрын

great work

@dropbearbrewery9032 2 жыл бұрын

Thank you! Cheers!

@sandybbeach Жыл бұрын

your product link is no longer active :( ... * can you put of your silicone, * or show a the label, * or update the link? Merci!

@lincolnhobartmiller Жыл бұрын

How did you adhere it to the lid?

@Polamish 3 жыл бұрын

How about a follow-up on the gasket> Cheers

@dropbearbrewery9032 2 жыл бұрын

Hi, sorry for the slow reply, our new Brewery is well underway and we are very busy at the moment with the new building fit out. Once we get the chance I will out together a follow up video, but it is still working well.