Make Your Smartphone Faster and Run Cooler. Dual Vapor Chamber.

Рет қаралды 24,985

Жыл бұрын

Make Your Smartphone Faster and Run Cooler. Dual Vapor Chamber.
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com/Store/Tools/iF...
Smallest Smartphone Thermal Camera: www.amazon.com/dp/B0BG2QC143?... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech.com/discount/S...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupply.com?acc=c5ab0bc60ac7929182aadd08703f1ec6

Пікірлер: 146

@SOURADEEPBISWAS Жыл бұрын

I & my friend always did this trick on our older phones by reapplying PC grade thermal paste & adding thermal copper plate if needed in certain phones. Thanks PBK for publishing the review to public for awareness

@PBKreviews Жыл бұрын

Thank you and you're welcome :)

@wise7260 Жыл бұрын

Where you add the thermal copper plate?

@putusatriavi Жыл бұрын

@@wise7260...thermal copper plate/ copper shim is placed at ram/ and cpu die its wont be touching evenly so you'll need a thermal paste to spread its contact area.... Die-paste-shim/plate-paste-cooler/frame...

@NiKhiLSaYi 18 күн бұрын

could you tell me why he has used grapgite sheet, is it impotant to use it? i wanna try and make it so please tell

@RestoreTechnique Жыл бұрын

Great modification idea, and video! 👏

@PBKreviews Жыл бұрын

Thank you! 👍 :)

@icecreamsandwichiify Жыл бұрын

I have some phones i'd love to modify, myself...very satisfying. Great video idea. Love looking at the hardware in these devices.

@PBKreviews Жыл бұрын

Thanks!

@realsmt Жыл бұрын

Thorough, well done sir. 👍

@PBKreviews Жыл бұрын

Thanks!

@raajdatta2014 Жыл бұрын

We need more videos like this.🔥thank❤

@atlasfenix6995 Жыл бұрын

Awesome video! A suggestion I have if possible is to test the water resistance or water proofing from phones. 👍

@sheikbombalot5781 Жыл бұрын

It’s pretty much unavoidable to lose some waterproofing when you open a phone. They’re really not designed for this.

@PBKreviews Жыл бұрын

Thanks. I did it for a while with some durability videos before, but it didn't catch much traction from viewers.

@atlasfenix6995 Жыл бұрын

@@PBKreviews too bad 🤷‍♂️, it is what it is lol. Cheers

@PBKreviews Жыл бұрын

👍 :)

@Davi_xpeng 7 ай бұрын

Hey can you tell me the materials used,im planning to do that on my phone and didnt understand some materials used on the video,Also can you tell me the dimensions of the copper plate you used?

@qubit1115 Жыл бұрын

Fantastic video!! Do you have any suggestions on where to source a vapor chamber replacement part, wanna do this for my old phone but can't find anything on aliexpress

@PBKreviews Жыл бұрын

You would probably need to fine a broken screen assembly with frame which comes with the vapor chamber attached to it or something like that. Usually they aren't sold as a replacement part individually.

@norbertpalfi8703 Ай бұрын

Hi, I liked your idea. I have an S22 plus, do you think this can be improved as well

@MrFranciscoooooo 7 ай бұрын

What are the names of the materials you have used?

@AH2005_PH Жыл бұрын

what about trying dual vapor with great amount of graphite

@myZAN Жыл бұрын

Hardware modding. Thats very pleasant to see.

@PBKreviews Жыл бұрын

👍 :)

@mohamedhisam518 3 ай бұрын

Bro where u buy this chamber and What Is That Sticker Is?

@kimjaspercruz857 8 күн бұрын

Most of the phone have vapor cooler under the screen so the best position you have phone cooler is on screen?

@DarkGT Жыл бұрын

Great idea adding another chamber! That would increase the time before the SoC overheats. May I suggest one thing, when running the synthetic test, be sure to run it 3 times in each iteration and take average values? This way you can insure that the score is accurate and there isn't anything influencing the results, like apps running in background or Android doing something.

@PBKreviews Жыл бұрын

Thanks! The test I ran was sped up 5000x because its a 20 min test that repeats the test 20 cycles and gives the best loop score as well as the worst loop score and displays the graph to see how it was averaging. So in essence I ran it more then 3 times :)

@DarkGT Жыл бұрын

@@PBKreviews I see, thanks for responding.

@andypurnomo3113 4 ай бұрын

How to get that vapor chamber sir?

@SakthiVel-zf3nf Жыл бұрын

Ur genius keep it

@PBKreviews Жыл бұрын

Thank you! :)

@porchourngchuor3567 Жыл бұрын

Well done. Could you put a vapor chamber into the MacBook air m2? and compare the performance?

@PBKreviews Жыл бұрын

If I can find one, I will look into doing it.

@acejericho8616 Жыл бұрын

A suggestion how about..u put 15 layer Griphite sheet on Flagship phone

@cenen7021 3 ай бұрын

That thing allready has one and with a fan you can prevent throttle. But with iphone xs max im need a fast fan because SOC is in empty space. No heatsink or paste just air. im gonna mod my xs max in future for pubg

@thepro7404 Ай бұрын

I had an old galaxy a7 2016 which got to freaking 92°c.I applied thermal paste on the processor and ram which made them dissipate heat to the aluminum frame.The temperatures dropped drastically from 92°c to only 70°c.The phone reached 70°c in the worst case scenario.After doing this only the side metal rail got a bit hot because the processor was now dissipating heat to something.The old thermal solution was a joke.It was a super small and a very thin thermal pad which dissipated the heat from the processor to a thin copper film which would conduct the heat back towards the motherboard.I also applied thermal paste to the backside of the processor.

@user-nw5qj4vn1t 7 ай бұрын

What is the difference between copre film and copre?????

@MyBoyGohan 2 ай бұрын

What do you think about the ROG 8? Should i still modify the components or not? It has the graphite all of over board

@PBKreviews 2 ай бұрын

I think the ROG phones and redmagic ones are already pretty optimized, so any modifications would not really yield any significant improvements.

@azaz8024 Жыл бұрын

Please make video on Samsung galaxy A52s 5G...tera down or heating issue ..thanks

@2nextreviews Жыл бұрын

Good job 👍 Up the Tab S8 😉

@PBKreviews Жыл бұрын

Thanks. 👍

@robboostph6689 Жыл бұрын

I'm wondering if placing a peltier module cooler on a Nintendo switch will have the same effect. I'm seeing a lot of magnetic phone coolers equipped with peltier modules or TECs.

@PBKreviews Жыл бұрын

I'm not too familiar with peltier module cooling, but I would think something like that doesn't really transfer heat away from the component rather than just providing a somewhat cooler surface against the component. Again not too sure since I'm not familiar with those. The phone coolers have a fan usually which also draws or displaces the surface heat so with that in combo with a peltier module cooler I would see some cooling.

@rchaze9730 10 ай бұрын

Yes! Those work extremely well. Only tested on s22 ultra when playing a few emulators. It was fridge time every 7 minutes of play. Until I tried this peltier cooling pad. Though I have a really good good cool an Alaskan cucumber! Play no frame drops for hours at time mine is plugged in power supply I've seen the built in battery option as well.

@ashar8192 Жыл бұрын

1:40 no way. You nailed it, it's such a common misconception 😅

@PBKreviews Жыл бұрын

👍 :)

@ronxgaming1351 21 күн бұрын

Can we put in note 20 ultra this vapor chamber

@ayoubr-line341 7 ай бұрын

What is that silver paper ?!

@cristianerr Жыл бұрын

Nice.

@PBKreviews Жыл бұрын

Thanks!

@rockingroli2057 Жыл бұрын

Doing the test with the phone lying on a flat surface is not ideal, because the heat dissiipation via the back surface is hampered. If I may I would suggest that you do the test with the phone in vertical position, so that the back can emig the heat to the ambient air. Keeping a note of the ambient temperature would also be valuable for comparison.

@PBKreviews Жыл бұрын

True, I was just considering in reality the phone would be in someones hands so the hands would be covering the back while it was in use. But yeah if I wanted to see the highest results that would be a good idea.

@ladislavzenk2139 Жыл бұрын

@@PBKreviews human hands actuall can cool electronics because of blood flow so the phone would be cooler

@ericschmidt242 8 ай бұрын

Correct. That means a 98 degree water bath/"coolant"/thermal barrier.

@nerdynumen 8 ай бұрын

PBK, I wanna get a S24 Ultra from my S22 Ultra, I'd like to see if we could try and drop temps as low as possible. The 2 Degrees is impressive, and the stability increased, while most likely not huge I'd like to see if battery life improved. While most modern laptops seem to go long enough for most, the cooler running SOC, RAM, Storage, alongside a Debloation tool may add enough battery saving alongside the 3nm Single Core / Efficiency to make the upgrade worthwhile. Think we could do something in the future?

@bulletpunch9317 Ай бұрын

Cooler running will usually use more power since the throttling will now be less. Unless the battery is affected by the temps so much it drains faster.

@nerdynumen Ай бұрын

@@bulletpunch9317 that'd factually false across the board. Completely & Utterly wrong.

@bulletpunch9317 Ай бұрын

@@nerdynumen cpus lower clocks when they get too hot. Thermal throttling look it up.

@m.raihanramadhaniihsan5519 26 күн бұрын

How i do it in samsung galaxy a33 5g?

@donovan5459 Жыл бұрын

Liked the idea! However I'm curious if sticking a graphene film behind my phone cover would help dissipate heat or would it trap it even more?

@PBKreviews Жыл бұрын

I mean it already has graphite film over the charging pad which transfers heat out the back but I don't think anymore would hurt.

@donovan5459 Жыл бұрын

@@PBKreviews Thanks for replying. Although my phone is a poco x4 gt with a plastic back, it wouldn't trap the heat at all? Also is it ideal if I add a copper tape/foil before adding the graphene film?

@donovan5459 Жыл бұрын

Btw, how come adding another vapor chamber didn't work at all? I expected the temperature to be around 38°c or even less with that added

@lrc3847 6 ай бұрын

@@donovan5459 Check the stability, went from 54% to near 60%. For a Snapdragon 8 Gen 1 is pretty neat.

@MyBoyGohan 2 ай бұрын

Hey also, what if you make a video about liquid metal thermal paste?

@PBKreviews 2 ай бұрын

It would require extensive modification because the liquid metal needs a housing or enclosure so it stays just over the processor and does not leak or get out anywhere else. If it does, it would short the board and render it useless.

@PavanPavan-ul8wu Жыл бұрын

Good job

@PBKreviews Жыл бұрын

Thanks!

@parthsoni1847 Жыл бұрын

Please teardown iQOO 3 (Less known phone from 2020)... I'm currently using this phone... I'm curious to see insides of my phone...

@PBKreviews Жыл бұрын

Hi, I don't get many viewers for the IQOO phones so it's not worth me spending the money on purchasing it.

@himanologanor4093 Жыл бұрын

thankyou

@PBKreviews Жыл бұрын

👍 you're welcome

@JoseSanchezdontyaknow Жыл бұрын

I think mine froze it's 4° out now my phone is running hot lol

@MonsTerFull_ Жыл бұрын

Very nice

@PBKreviews Жыл бұрын

👍

@Trinitrophenylmethylnitramines Жыл бұрын

The fact is when you cut the vapor chamber all the cooling magic is gone. A small copper piece will do better than that piece of vc

@PBKreviews Жыл бұрын

It still works, but yeah a solid copper piece would be better but I didn't have one on hand to use to just used the vc.

@bumbeelegends7018 Жыл бұрын

Op content 🔥

@PBKreviews Жыл бұрын

👍 :)

@8peterp 2 ай бұрын

just done on my 2 years old exynos s22 ultra ,phone started to restart and did the black screen of death thing ,still not much about around. thermal paste was like dry biscuit and graphite foil was dried onto the shield completely around. no bsod since upgrade ,thanks

@PBKreviews 2 ай бұрын

you're welcome :)

@NiKhiLSaYi 18 күн бұрын

could you tell me why he has used grapgite sheet, is it impotant to use it? i wanna try and make it so please tell

@8peterp 17 күн бұрын

@@NiKhiLSaYi don't know really because copper has better heat transfer. tried with graphite and had to take apart again wasn't great,removed and used a similar sized copper ,sanded down on glass both side then both side thermal paste ,video is good only Hydronaut works and now good ,3dmark always in top 1%. maybe the best would be copper foil on the top to close the gaps ,there is copper foil in garden shops

@NiKhiLSaYi 17 күн бұрын

@@8peterp thanks for your reply

@superminer420 Жыл бұрын

Best Solution is, Drop Your phone in Water 🌚

@PBKreviews Жыл бұрын

lol :)

@brandonnithianandan Жыл бұрын

I do that too And wondering would the glass crack from getting hot and suddenly cold ?

@AnnihilationGod69 Жыл бұрын

@@brandonnithianandan 😂😂😂👍

@MISCELLANEOUSENTERTAINER Жыл бұрын

Liquid Nitrogen 👻

@kurejirin Жыл бұрын

I recommend Peltier coolers Its easy to DIY, just a peltier module and a very very old gpu heatsink

@putusatriavi Жыл бұрын

Stability is improvement. I would like to try this on my poco F3.. since that I've noticed the F4 has better cooling by enlarging its colling area

@PBKreviews 11 ай бұрын

👍

@alitef5191 14 күн бұрын

@@PBKreviewsare the Xiaomi Poco s Vapor chambers removable from frame? Only heat to remove stick?

@pimpinal004 Жыл бұрын

Nice

@PBKreviews Жыл бұрын

Thanks

@sairamredekar9575 Ай бұрын

Do it for redmi note 8 pro plz

@TechMDYoutube Жыл бұрын

90% it’s battery. We fix slow down all the time.

@thechoku9765 Жыл бұрын

Your idea was great, unfortunately most people dont think this is practicle, i recommend to use peltier cooler, not only it is more practicle, but cheaper and more capable to handle the heat when on gaming.

@PBKreviews Жыл бұрын

Thanks, yeah definitely not something everyone will be doing but just a project to see the possibility. I'm not too familiar with peltier coolers but its possible.

@christianflores3437 3 ай бұрын

That black pad when you remove cover. Remove it. It traps heat to not hurt your hand. May also be for to hide wireless charger

@siammostafa2009 4 ай бұрын

Very informative video. Kudos .This is what we need and not some jerryrigs telling jokes and puns all the time.

@PBKreviews 4 ай бұрын

👍 thanks

@pixels_per_inch Жыл бұрын

My S22 Ultra is reaching up to 70°C while recording a video. Should I be worried?

@femus3359 Жыл бұрын

No its normal ! smartphones are tough today

@PBKreviews Жыл бұрын

Are you referring to internal temp or external housing temp? Usually when 4K recording, the phone uses a lot of processing as well as battery power so would heat up quite a bit.

@pixels_per_inch Жыл бұрын

@@PBKreviews Internal CPU temperature from CPUZ

@ashar8192 Жыл бұрын

@@pixels_per_inch internal shouldn't matter to you. Measure the external temperature, if possible or if it really let's so hot that it's not holdable anymore, then it's valid to be concerned Listen at 1:35 in the video

@PBKreviews Жыл бұрын

Yeah should be ok, if it was external temp then I would be worried.

@159tony 17 күн бұрын

Personally I'd first replace the stock battery, then take the phone apart some more and fabricate an aluminum backplate and attach a vapor chamber on it so it makes contact with the SOC. Then I'd change the operating system with a custom kernel with overclocking functionality. If you pair all of this cooling and power and fresh battery and a more optimized OS with an external phone cooler, that cools the aluminum backplate down, you can possibly run your device with at least 60% more clock speed if not double (stability may take a hit after 75% increase) I did these steps with my Razer phone 2 from 2018. Pixel experience aura build, took out the LED RGB and replaced the battery, put an aluminum backplate on and attached a secondary vapor chamber on it.. the phone now runs at 3ghz all the time with no issues and 3.2ghz if I really need the horse power and if I need extra cooling, the modifications I have made already makes it extra efficient.

@alitef5191 12 күн бұрын

Are Xiaomi vapor chambers safely removable? To take it from a frame part of old Poco phones? without any hole or cut

@159tony 12 күн бұрын

@@alitef5191 no clue if they are. Some phones glue them to the frame, in which case it is safely removable, you just have to use extreme caution. A heat gun, acetone or high grade alcohol can undo the adhesive. Or a combination thereof. Personally I'd check for all. Heat is unlikely to work alone since it is purpose built to hold under heat.. try acetone or high grade alcohol.. if you have access to everclear, try that. If it's 190 proof, it should do fine for this purpose if the adhesive is soluble with alcohol. (190 proof is 95% alcohol by volume)

@n8n8n8n Жыл бұрын

But is it still waterproof? I have no idea what people do with these S22 Ultras, I had never any heat issue (Exynos) and it's performing like a beast.

@PBKreviews Жыл бұрын

If you apply new original pre cut adhesive for the phone (usually they come pre installed with original battery door/back cover replacements), then it should retain the resistance.

@n8n8n8n Жыл бұрын

@@PBKreviews Thank you, didn't know that :)

@PBKreviews Жыл бұрын

You're welcome :)