How To Make This EASY Dimple Die Tool for Under 20 Bucks!!! ( With Just a Welder + Grinder!!! )

Рет қаралды 1,371,335

2 жыл бұрын

On this episode of Make It Kustom, I show you how to make an easy dimple die tool step by step. Anyone can do this at home with a grinder and a welder. I have used dimple dies in the past for the structural bracing on the Model A roadster project.
www.japhandskustoms.com/shop
#MakeItKustom #japhandskustoms #kustom

Пікірлер: 836

@UCanDoIt2Mike 2 жыл бұрын

I'm going to repeat what most people are expressing. Your channel, message, delivery, enthusiasm, humbleness, and willingness to share your talents is invaluable! Great camera work and editing cannot be overlooked. Thank you Karl and Kristina... you bring a smile to many faces when they see a Make It Kustom video has been published. Cheers Mike!

@karlscribner7436 2 жыл бұрын

Actually it’s Karl with a K and Kristina? Also with a K -Karl, with a K, in MICHIGAN.

@joshm8661 2 жыл бұрын

@@karlscribner7436 thanks Carl lol

@garyisaac5634 2 жыл бұрын

Outstanding in all aspects mentioned, plus the sound quality was beyond compare. Total shocker for my first visit to your site. Looking forward to many future visits. Thank you K and K. If you can ever do without you metal maid keeping your shop clean I could use her service. I expect a price break though, she can leave her jewellers loop at home. No Karl, I know you don't do it. Do you know anyone that wants to buy a bike? It has no seat or handlebars. It's for someone that lost their ass and doesn't know which way to turn. 😂

@wallbawden5511 2 жыл бұрын

I was going to write some thing but the above say's it all

@ex-engineer6657 2 жыл бұрын

Ditto.

@fitzeesfabrications 2 жыл бұрын

Nicely done.... I'm going have to stop watching you! You make shit I want to make and I got enough on my plate now as it is. Hahaha. Love it. Putting in the flaws and mistakes makes you real. Hats off to another fantastic video. Now to go fine me some dimple die material...congrats on the new shop. Looks nice and bright. A few videos on the move and setup be nice. Think few of us would enjoy that.

@mickholgate3347 2 жыл бұрын

Good to see comments from one legend to another, love ya work Fitzee & Karl!!!

@richcaseaxon 2 жыл бұрын

I'll look forward to your take/video on this as well Fitzee LOL

@easttexastramps 2 жыл бұрын

Fitzee!!!!!!!!!!!!!!!!!!!!!!

@brianjarrett310 2 жыл бұрын

Thanks to you both. No shit. Your videos keep me sain.

@karlscribner7436 2 жыл бұрын

Indeed we would, Karl and Fitzee, my 2 fav metal bangers.

@janeblogs324 2 жыл бұрын

I use a greased threaded rod through the center to compress them together. Even strong enough to dimple 3mm steel. Its a must when dimpling on the car when you can't fit the car in your shop press

@ForgedShaft 2 жыл бұрын

"when you can't fit the car in your shop press" 😁🤣🤣

@ishsiriram8286 2 жыл бұрын

When I make one, I will probably do it this way.

@kazzTrismus 2 жыл бұрын

if you put the flange piece that youre going to grind on to the shaft and start grinding it will begin to spin....now its - its own lathe! get her spinning and hold your grinder hand steady . the threaded rod allows you to double nut/lock the flanged piece from jumping up / around. once youve done it for a few minutes it all makes sense. the grinder spins the piece and grinds all at the same time and because power is lost to spinning the grinding doesnt dig in very deep.... you could also weld first and put it in a drill then mount the drill in a vise. the cool part about making your own is you can make both pieces with steps in diameter to do 2 different hole sizes in 1 tool or add a crease into the flange/dimple make diamond or star or square etc dimple dies. time is cheap when its mine for me....lol

@ishsiriram8286 2 жыл бұрын

@@kazzTrismus There is another aspect that can be brought in here. make the the bottom and top piece to fit perfectly into one another without any clearance for the material thickness you want to dimple. ie. zero clearance. then make a few washers, each washer to be the thickness of the various sizes of plate you want to dimple. Then you just insert the relevant washer to match the material you want to punch. The washer will give you the relevant clearance needed.

@kazzTrismus 2 жыл бұрын

@@ishsiriram8286 leave the clearance...as washers will only make space in 1 direction.. If doing/wanting a more complex shape than a cone, precision fitting reduces the range of material thickness. details/features would require precision fitting on 2 axis at least. Too tight will = shear depending on design

@michiganmoto7687 2 жыл бұрын

I love your content. What I appreciate most is you not editing out mistakes. We all learn from mistakes and seeing a competent person make one and adapt and move on is a hugely positive message. Keep doing what your doing.

@tatellopitso Жыл бұрын

I really appreciate that too, I just loved it and made me feel better, that actually it's normal to loose a little concentration, thank you for this comment

@fredgillick3071 2 жыл бұрын

For a young man, you are very talented. I'm sure before you have all the tools you have now, you had to make a lot of them before buying them. You would also make a great metal teacher. Great video.

@justfloat1 Жыл бұрын

Back when i first started out, the old timers would share information for nothing, except maybe to make you feel like a newbie. I guess it made them feel smarter. Im glad to see things have changed and sharing information is just needed. Thx for sharing…….

@TalonPro 2 жыл бұрын

"The joy of making it" THATS what a lot of people are missing.

@troysgarage 2 жыл бұрын

It’s hard to show mistakes, I know from experience. 🤣 It’s refreshing to see the honestly and realism when making something yourself. It doesn’t always go as planned. Nice work! 🙌🏼

@immelting9834 2 жыл бұрын

The best part of this channel for me is ; the showing of how to get results using cheaper , homemade, and ways to save cash by building your own fabrication tools. Professional equipment is out of the reach for the majority of people. Thanks for the videos 👍🏿

@Johnny-nb7eg 2 жыл бұрын

"I don't want excuses!..." the way to go! Thanks for all the useful tips! What is better than making it your own...

@RogersABodyGarage 11 ай бұрын

I have never needed a dimple die before, and I don't think I ever will, But I want to make one now just to say I did! I preach on my channel that you have to think outside of the box and get creative. This is creativity and hot rodding at its core. Awesome!

@haleym16 2 жыл бұрын

It's people like this guy who got me into the car world. Good dude

@atruefreethinker1944 Жыл бұрын

great vid. two things I like... your humility and your usage of common tools.

@markgriffin4888 2 жыл бұрын

It's TOOL TIME, unlike Tim Taylor, your stuff up didn't end in disaster 😆😆😆 Very clever 👍👍👍

@brianhamalainen8817 2 жыл бұрын

Ough ough ough!

@albertifergan6506 Жыл бұрын

I am relieved that I am not the only one making those mistakes. Great job.

@jvazquez53 2 жыл бұрын

I learn more in one of your videos than going to a school for a whole semester! Simply explained and to the point! Love these ideas!

@seditiousmonkeyart 2 жыл бұрын

It's great to see a younger tradesman making his own tools. I love making my own tools. Apart from the satisfaction you can incorporate all the best features. Great job and keep inspiring others to create.

@westhighlandcoachhouseinc.3716 Жыл бұрын

Yes! A Big Shout to The one and only Mister Rick Farmer... Extraordinaire! Must Great to have him on your team!

@grahambirt6004 2 жыл бұрын

how simple and quick to make ,making your own tools is cool as ,thanks a bunch ,you make people like me just get up and do it

@MagVair 2 жыл бұрын

TEE SHIRT QUOTE: "NO EXCUSES! THERE'S ALWAYS A WAY!" 🤣😂😁👍

@justinnorthrop895 2 жыл бұрын

You and your wife, by the way the unsung hero of these videos, are making some of THE best KZfaq content out there. Just in case you didn't already know! Can't wait to see what's next and hope your move goes well!

@malcolmyoung7866 2 жыл бұрын

Love the honesty in this vid....a small mistake (that we have all made) emphasised and rectified..mistakes and honesty very good for the algorithm..THIS makes this channel...

@0lddragracer426 2 жыл бұрын

They don't give the commercial dimple dies away, as I'm sure you already know. This is a big help Karl, thanks.

@BuildSomethingAuto 2 жыл бұрын

This is the best part about outfitting your shop/garage with fabrication tools. You get to the point where you need a tool or part for your build and realize its quicker and easier to just make it how you want it then to shop around and wait for shipping etc. I think more project car builders should invest in this stuff and learn how to use it, very satisfying! 👍

@stevenmccrickard1401 2 жыл бұрын

Check out Fab Rats.

@robinimpey101 2 ай бұрын

Simple dimple! The way you do and explain, everything is excellent! I want to make a dimple die, and I don't even need one! 😄

@thomasjones3005 2 жыл бұрын

Japhands are magic hands. Doesn't matter what you do, when it's done it's beautiful. very creative, very helpful. And video crew does a fantastic job capturing it all. She deserves a super hug. Love your channel. The two of you make it all happen in such a classy way. Educational, entertaining, always. Thom

@John_D75 2 жыл бұрын

Karl, thank you again for sharing how to make things with simple tools. The knowledge you share is invaluable!

@bobbob8229 2 жыл бұрын

You are NOT an idot 😎 Your teaching is GREAT 👍

@joeyisachannelnow5057 2 жыл бұрын

Can't get enough of these videos thanks for all the content boys and girls at M.I.K.

@donsmith9797 2 жыл бұрын

Perfect, I love making my own tools for a job, so satisfying.

@phillipstephenson1597 2 жыл бұрын

Another awesome video. Love watching people make tools as well as metal working techniques explained for the common man just getting started

@MrGixxer1300r 2 жыл бұрын

For a young dude you are really the shit. I grew up like you with more time than money. My father got me a job working with him in a steel fabrication shop. and the rest was history. I love making my own tools!! Thanks for these simple tools that make a job look so more professional.

@ronmiller682 2 жыл бұрын

I absolutely love watching your videos. You talk and act just like we are working along side you, and not like your above anyone. Thank you for that. You are a super talented man. Thank you for sharing your knowledge. Can't wait for the next video.

@davidcastanedajr.1268 2 жыл бұрын

Thank you for all of the video episodes thus far! I’m learning a ton! You are a true Master and an artist!

@wht240sxka 2 жыл бұрын

You’re not an idiot. We all make goofs. Love your attitude and content! Keep up the good work for us. Gives me motivation and has become a part of my day. ✌🏼

@honeydoshandymanservices-l670 2 жыл бұрын

Don't sweat it bro making mistakes and working through them is real life. I love that you are so real on your channel it is refreshing!

@jpstrim 2 жыл бұрын

Great content as always! Really enjoy your approach and the way you deliver this awesome information. Fantastic to see the new shop happening as well!

@danielminchev6031 2 жыл бұрын

Beautiful, beautiful, beautiful. Thanks this video is a real savior.

@godemperorhoover2131 2 жыл бұрын

I appreciate the fact that you did not edit out mistakes... I do stupid stuff all the time, but people only see the finish product and say how great they think it is. I can't help but think to myself, if they only knew how often I have to fix little mistakes that they never see. Keep that in your content, it really makes you more relatable.

@b3av3rz 2 жыл бұрын

I've never done any kind of body work but after watching all your videos. You got me want to go mess with this old 82 MC I've got at the farm.

@spidersinspace1099 2 жыл бұрын

Thanks for the great video, mistakes and all. You are no different than the folks who watch your channel and that's what I like about you.

@justjake6619 2 жыл бұрын

I like that you didn't edit out the mistakes and issues you came into on this simple project. Subscribed because I think you have good vibes and positive energy. Keep it up!

@rchighfield1 2 жыл бұрын

As always I get excited when a new video is posted! Didn’t think it was possible for me to gain more respect for you (at the top already) but you laughing at yourself for a mistake is rare to see, an admirable trait IMO! Thanks again for doing this and sharing to us.

@angemayberry2648 2 жыл бұрын

I am Impressed, Glad I found your channel. Very down to earth, please stay this way. Do not change a thing.

@mattrage1673 2 жыл бұрын

love seeing the mistakes as well, make you far more relatable than the guys who edit everything in a way to make them look perfect.. keep up the great work, you are very inspiring

@Toyotajunkie 2 жыл бұрын

Awesome. Just Awesome! Love your real life approach to the work, the videos, and not "hiding" it when you "make" a mistake!!!

@Bangkok-ik1fp 2 жыл бұрын

You need to sign that dimpled piece and put it up for a give-a-way. You're going to have 100k subscribers very soon! Mad skills!

@gkanderson92 2 жыл бұрын

Best demonstration for homemade dimple dies that I have seen yet appreciate it

@kennethcarver9687 2 жыл бұрын

WOW,you make everything you do look easy to build at home for all us doit yourselfers,well done,thank you Christina for all your camera work to show how Karl does his work so we can clearly see how it's done and copy some of what he builds 🏁👀

@shaunxr686 2 жыл бұрын

Awesome work… I have been trying to find a small dimple die for the blind screws for door latches. Having watched this I’m thinking I might just go make my own. Thank you for the inspiration!

@pmae9010 2 жыл бұрын

So great, I appreciate that you did not edit out the mistakes, it makes it easier to build knowing I will screw it up and it's still ok.

@nolanmegehee6452 2 жыл бұрын

Great video just like the rest of them you have done. I'm 60 yrs old and have been making my own tools when needed, and have learned a lot from you. Thank you and keep on keeping on.

@leobrent7926 2 жыл бұрын

That was another great tool that you made it look easy. I’m glad people are noticing you on KZfaq. Good things could not happen to a better guy. You are awesome and your videos are fun to watch. Keep them coming!

@MrRoscoj 2 жыл бұрын

Man that is awesome! Incredible work. I already have a full set of round dimple dies but I’m thinking I might use the same concept and make some square and maybe triangle ones. Thanks for the inspiration!

@charlesgalea69 2 жыл бұрын

Awesome video today Really enjoyed it from Melbourne Australia. 🇦🇺

@michaelscott2381 2 жыл бұрын

Learning something new is rewarding. You teaching Your experience is awesome! THANKS

@ouellettekris 2 жыл бұрын

Giving me so many idea for when my new shop is built cant wait to start working on the trucks again!!!!

@onefortheroad2291 2 жыл бұрын

While I consider myself a bit of a hobbyist fabricator, I watch your videos and am blown away by your abilities. Half of the stuff I probably won’t be able to do or even need, but damn is it fun to watch! Great job as usual

@davidelliott5843 2 жыл бұрын

Respect to Christina’s videography. Top job.

@rogermontee8264 2 жыл бұрын

Thanks Karl for the great video.I enjoy all of them. Your a true craftsman and your skills are fantastic.Your new shop looks great it will be nice when you get it organized the way you want it.Thank you for sharing Karl and keep up the great work.

@SoloRenegade 2 жыл бұрын

thank you for showing how to do it without a lathe. we need more fabrication videos like that showing people that simple tools can do the job, and that perfection is often not necessary.

@donaldheim6018 2 жыл бұрын

This is one of the most valuable channels on here .

@callumduncan6728 2 жыл бұрын

carl and christina what a team these videos are so in formative and well shot thank you so much for the top quality content , you know your talented when fitzee gives you respect

@chandurasika 2 жыл бұрын

Something I've always wanted. Thank yo so much

@billcobb9408 2 жыл бұрын

love your hands on real world content

@kenhomeier8629 2 жыл бұрын

Love, Love, Love the making your own tools videos. Achievable ideas for the average guy with basic tools.

@theshed8802 2 жыл бұрын

I have your exact vice, right down the missing pipe jaws. It's an awesome bit of kit, and it was cheap. I bought mine over 40 years ago and it must have travelled over 1 million kilometres around and across Australia within me in the back of my vehicles. Yours is the only other one that I have seen. Love your content. Greg

@joshaho5036 2 жыл бұрын

No excuses, you can figure it out. Best advise I've heard in a long time!👊🏻

@jeffallen5387 2 жыл бұрын

From way down south here in Texas a huge thanks! I’ve used your tips and tricks while fixing a rusty mustang. Glad to see your moving up and growing. Great channel !

@oliveirainvestments2884 Жыл бұрын

I do love every single video that you guys provide to us...lots of knowlodge and tecnique that make all easy!God bless u all Pablo De Oliveira

@deltajohnny 2 жыл бұрын

Awesome channel, with perfect editing and perfect volume mixing! 👏👏👏 Thank you so much! 😉😉

@gasjockey101 2 жыл бұрын

DUDE MY BROKE ASS NEEDED THIS VIDEO DEFINITELY MAKING ONE IN THE FUTURE!

@paulsugerik3389 Жыл бұрын

Good show keep it up helping young people learn how to do this stuff keep the art alive

@thediscuslounge5152 2 жыл бұрын

Great Video again... keep them coming. Always enjoyable and informative. Nothing beats spending time in the shop.

@shaneboyle2969 Жыл бұрын

Yet again another video that doesn’t disappoint. From a guy just tryin to learn cool stuff your channel is definately a first place scenario. I / we are grateful for everything you video and demonstrate . Currently building a van like your boogie van with a bit of a twist and every video you have gives knowledge and insipiration. Thanks again

@christhornton9859 2 жыл бұрын

Did that deburring tool give anyone else chills when listening ? Oh OK, only me? Love the channel and your content.

@MrPorknstien 2 жыл бұрын

Wow this video was great!! Will definitely make a couple different sizes of these. Thanks for sharing

@1one3_Racing 2 жыл бұрын

Coming from a farming background, we always made the tools we didn't have. I never thought of making dimple dies though! I've been trying to get someone to lathe up a set but might give this a go. Australian prices would probably make it cheaper to buy a set than to buy the raw stock though.

@gabrielbowman9876 2 жыл бұрын

I do enjoy seeing others make there own tool I made mold and die for sheet metal leaves and flowers

@DavesGarageuk 2 жыл бұрын

Only recently found this channel along with Fitzee you guys are teaching me loads! I only bodge at this stuff, been playing (as a hobby) with cars for years, but after watching you guys I've jumped in and started my own channel, you'll recognize what I have learned from you in it :). Keep up the videos, I love them...

@dennispellicano3549 2 жыл бұрын

I like watching your videos you sharing your knowledge helping that is poor boys I've been working on my car with some serious rust damage your videos will help me out a lot with the equipment I have and I haven't used them many years thanks

@ronbelldvm 2 жыл бұрын

Ingenious!! That is a great idea! Thanks, and thanks for showing us your mistake and how you fixed it. Glad to know I'm not the only one who makes those kind of mistakes. Even happens to the best.

@shawnbrown6752 2 жыл бұрын

We really appreciate your knowledge and you inspire all of us. Thank you

@tomthumb3085 2 жыл бұрын

As always, a great video with well explained fabrication steps. Really humble guy who tells it as it is in an interesting and infectious way. Top work Karl.

@joelongstaff7601 2 жыл бұрын

Thank you so much. I'm building a peddle car for my grand daughter and now I can do some dimple work. Because it's small I spun the rear fenders on the lathe. Next I need to learn how to make some body moldings. My son bought me a bead roller set and shrinker stretchers.

@deanmartin9122 2 жыл бұрын

Always enjoy watching you work Carl...i also enjoy learning from you...

@davidcraemer8227 2 жыл бұрын

Thanks Karl and Kristina for all the cool content. Will need to make one of these in the near future.

@benjohnson7170 2 жыл бұрын

Top stuff....Your a Legend mate. One of the best channels on the tube! You have replied to a couple of my comments so far,which is i thank you for. Most of us comment ,to give you support. I think we would rather you show great content ,than have your valuable time taken up with typing answers and what not....... Cheers buddy from Oz.

@CarlosMendez-hs8yi 2 жыл бұрын

No words truley spoken ! Looks Awesome ! What a tool made by an expert its brilliant buddy

@user-fz3pk8ju9d 2 жыл бұрын

hello, thanks for the lecture and the practical lesson

@ishsiriram8286 2 жыл бұрын

Awesome, I was toying around with this idea in my mind. Now I have to try it. Thank you for sharing. Your videos and simple approach makes it so much more enjoyable. South Arica

@ScottyLo 2 жыл бұрын

Always teaching us cool things. Thanks for sharing your videos. 🏁

@victorrodea7163 2 жыл бұрын

You have a" good eye" Mr. Your enthusiasm and passion is obvious. Yes,I subscribed.

@caveman9275 2 жыл бұрын

Thanks for the tips I am putting together a metal shop For my 1968 FJ40 restore mod project. And this will be handy for a few things! Thanks!!!

@InebriatedEngineer 2 жыл бұрын

Perfect timing! I was just thinking about making a set of these. Thanks Karl! 🍻

@garybrady9531 2 жыл бұрын

absolutely a great tool thanks for your intel and sharing

@johnparker3725 2 жыл бұрын

Love all the tool content!! Keep them coming, you could do a whole series on all your customized/scratch built tools!!

@branchandfoundry560 2 жыл бұрын

That would be the best series on KZfaq!

@MakeItKustom 2 жыл бұрын

I’m cooking something up! Time to make a tool!

@jimw6991 2 жыл бұрын

@@MakeItKustom Nice job ... I wonder how long you have been doing this sort of work.

@That70sChannel 2 жыл бұрын

Christina is the war correspondent of KZfaq videographers. You moved the work to direct the sparks away. . .she dives with the camera directly into the line of fire.