Making a 3D Printed Wolverine Cowl: Cosplay Tutorial

Рет қаралды 2,710

Күн бұрын

This is how I made a 3D printed Wolverine cowl. The mask was created without using any colored paint or primer! The files were purchased and downloaded from Do3D, check them out below! If you enjoy this video please give it a Like and Subscribe to my channel for more content! THANK YOU!
Follow me on Instagram:
/ mark_it_made
Facebook:
/ markitmade29
3D Files: www.do3d.com/product-page/x-m...
Items and Materials Used:
Ender 5 Plus 3D Printer - amzn.to/3c26FJb
Small Magnets - amzn.to/3zuDNod
Silk PLA - amzn.to/3WcWBBn
Black PLA - amzn.to/3S0ctEF
Fine Buffing Pad - amzn.to/3WdtNIU
Coarse Buffing Pad - amzn.to/3zrwj5i
Fine Buffing Compound - amzn.to/4ePCdgN
Coarse Buffing Compound - amzn.to/3zukprA
220 Sandpaper - amzn.to/4eWoa9w
2000 Sandpaper - amzn.to/3XUTYW2
3000 Sandpaper - amzn.to/45TSflE
Velcro - amzn.to/45Yh3cA
Nitrile Gloves - amzn.to/3VIayY1
Rustoleum Gloss Clear Coat - amzn.to/3c9YHgZ
Dremel - amzn.to/45VtqWy
Music: Empires by Alex-Productions / alexproductionsmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3NFzN8R
Music promoted by Audio Library bit.ly/3LfGsVN
DISCLAIMER: This description contains affiliate links, which means that if you purchase a product using the link(s), I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for watching!
#3dprinting #wolverinecosplay #marvelcosplay

Пікірлер: 13

@SeekStrength3 24 күн бұрын

This is genuinely so impressive!! You’re a star Mark!!

@nickshininger 26 күн бұрын

Sickkk all ready for Deadpool & Wolverine!

@NaiveSteve 26 күн бұрын

Incredible work! And here I thought every project needed a tube of body filler and a full can of filler primer 😂

@DesignOnTwitch 24 күн бұрын

Nice

@larstremmel3404 24 күн бұрын

That's the way to do it! Exactly the process I'm going to use. Thanks for the great video!

@TheDarkKnight_Arkham_Origins 26 күн бұрын

Looks great 👍

@artwithmahi_ 25 күн бұрын

Nice one..bro

@anneshininger3723 24 күн бұрын

Wow! I loved the polished finish. Nice work!

23 күн бұрын

Without using any paint (Sprays clear paint on everything)

@thecorrnershed 24 күн бұрын

Mark, what Cura setting did you use to not get the swirl on the top of the helmet?

@markitmade8319 24 күн бұрын

Temp was 203, retraction was 6 mm, layer height was 0.12, z-hop was enabled and so was combing. I didn't do any sort of ironing. Just keeping the layer height low and the fact that this is a textured helmet really helps.

@-prime-4729 24 күн бұрын

i liked how it turned out but i do have to say that Lacquer is a paint so saying you didnt use paint was wrong sorrry just had to let you know other than that nice job

@markitmade8319 24 күн бұрын

I meant colored paint, but figured that was implied...