Making a 4" Drawknife

Рет қаралды 33,927

2 жыл бұрын

In the continuing series of tool making videos, Boat Builder Bob Emser, creates a 4 inch drawknife. Getting inspiration from a Veritas 4" carvers drawknife Bob builds a knife out of O-1 tool steel featuring black walnut handles with brass ferrules.
“If you’re going to make it, make it beautiful.”
Bob Emser
Subscribe for more Boat Building from The Art of Boat Building:
kzfaq.info...
Share this video with a friend:
• Making a 4" Drawknife
How to support The Art of Boat Building.
Purchase Official Merchandise here:
www.bonfire.com/store/the-art...
Become a Patron:
/ theartofboatbuilding
Watch next
Recommended Playlists
Carvel Planking Playlist:
• Carvel Planking
Haven 12 1/2 Playlist:
• Season 2 - Haven 12 1/2
Tool Making:
• Tool Making
Let’s connect:
Facebook:
/ bobemseramericansculptor
Instagram:
/ artofboatbuilding
Twitter:
/ bobemser
Linkedin:
/ bobemser
Bob Emser American Sculptor:
www.bobemser.com
#theartofboatbuilding #artofboatbuilding #makeitbeautiful#woodenboatbuilding #buildingasmallboat #buildingasailboat #shipwright #toolbuilding #Haven12 #herreshoff #shipwright

Пікірлер: 95

@terrybrower3437 3 ай бұрын

Great video! You remind me of my brother. He would rather have fun spending a good part of the day building something instead of buying it off the shelf.

@futuretab 2 жыл бұрын

These side projects are so good that I forget that you're actually building a boat - nice job.

@j.d.anderson6710 2 жыл бұрын

I started watching your videos from the beginning... Some where along the way, about the time made the rigging knife video I had a pretty bad accident that involved a brain injury that affected my memory. I was struggling to remember certain people and places especially names and faces. My wife noticed that I was watching your videos and said it was good to see me getting back my regular self more and more. I have no memory of your channel or having watched it, but I found your channel all over again and fell in love with boatbuilding again. Thank you for your videos and sharing your build with world. It means more to some people than you could probably imagine.

@humpbackhowler3466 3 ай бұрын

I admire the man in the field of boat building that dares to build a boat in the manner you demonstrate.

@jerrycomo2736 2 жыл бұрын

Using light to determine the edge sharpness: Back when lumberjacks used only saws and axes, the saw shed where they sharpened the saws had skylights in them and the shed was aligned on a specific axis in order to allow proper daylight to reflect off the newly sharpened edges to determine their progress.

@dbhyslop 2 жыл бұрын

Bob, I’m surprised you’re not growing the tree yourself for the mast!

@ronjones9373 2 жыл бұрын

I will probably never make a drawknife but there was still a lot to be learned from this video.

@mjmdiver1137 2 жыл бұрын

"I need to make the mast for this boat. First, let me start by mining some iron ore..." Hahaha... I love the episodes where you make tools. Keep up the great series Bob.

@mjmdiver1137 2 жыл бұрын

@@ralphgesler5110 Yes, true that. There's plenty of iron ore in Michigan.

@mattevans-koch9353 2 жыл бұрын

Another beautiful tool. I'm starting to believe you enjoy making tools more than buying them and at least as much as making boats and sculptures. Thank you Bob for another engaging and enjoyable evening video. Take care and stay well.

@mattiasfagerlund 2 жыл бұрын

Your drawings are always super crispy, like little artworks on their own!

@robertbamford8266 2 жыл бұрын

A lesson in patience! I sometimes resist investing the time to make a project-specific jig that will save me (much) more than that amount of time over the course of the project. Thanks for the lesson.

@croceater3 Жыл бұрын

great vid thanks , love your hair .

@jacknelson8533 2 жыл бұрын

I would have rough ground the bevel edge with a grinder first to save on the files, but maybe it doesn't matter in this case, also on tangs would have used the corner of file or maybe grind rough to make several grooves on tangs for glue to hang on to, and I still learn a lot things from you.

@TrapShooter68 2 жыл бұрын

I love your boat building vids, but your tool making are my favorites. Thank you for another wonderful one!

@campbellmj9405 2 жыл бұрын

Very nice. I learned the hard way when sharpening a drawknife to wear cut resistant gloves.

@buvro 11 ай бұрын

My goodness! Awesome work!

@rickeyviner620 10 ай бұрын

Amazing work. You’re an inspiration. Keep at it1

@SteveHayes1 2 жыл бұрын

I love these tool builds!

@TheArtofBoatBuilding 2 жыл бұрын

Thanks Steve!

@Stormin13 2 жыл бұрын

You are a true craftsman in a wide variety of specialties.

@gentlemandude1 2 жыл бұрын

Another beautiful tool, Bob. Thank you for sharing your techniques.

@pauldrowns7270 4 ай бұрын

One of my favorite tools. Thank you!

@TheArtofBoatBuilding 4 ай бұрын

Mine too!

@denisalix6051 2 жыл бұрын

Always a pleasure to watch anything you make

@markschuman3615 2 жыл бұрын

Bob you never cease to amaze me nope don't like the feel of that one nope don't like the looks of that one OK I'll just make my own gotta Love these tutorials THANKS

@KS-uv7yc 2 жыл бұрын

Another fantastic video -- great thanks. Another approach would have been to take the "excess" steel and forge it into longer tangs. There should be more than enough, and then make threads on the ends. That said, you are a terrific craftsman. Bravo.

@wrptkz 2 жыл бұрын

Everything is art with Bob.

@chrisleggatt3240 2 жыл бұрын

Looking forward to the mast and spars episodes, thankyou for having us along 👌

@garyfroeschner2523 2 жыл бұрын

good stuff

@thomasarussellsr 2 жыл бұрын

Another beautiful tool, Bob. Great job, and no black/blade smithing involved, just stock removal and some wood turning/wood work. Awesome work. Loved the bevel/file rig. And a bit of research, of course.

@richardsiddon610 2 жыл бұрын

Thanks Bob. Hope you’re enjoying your weekend.

@MCsCreations 2 жыл бұрын

Amazing work, Bob! It turned out fantastic! 😃 Some day I need to make one as well! Stay safe there with your family! 🖖😊

@stayfrosty1758 2 жыл бұрын

And you make it beutiful each and every time Bob!

@nicolabaldan6323 2 жыл бұрын

Your videos are fantastic!!!! Great job as always!!!!

@ibrhemahmed170 Жыл бұрын

Awesome

@stevecourtney8572 2 жыл бұрын

Your talents Sir are over the top. Thank you for sharing your kraft

@rpower1401 Жыл бұрын

Great video. I've been making my own walnut, maple and birch handles for chisels and other tools for the past year. I'm about to do my first drawknife handle set for some antique tools I picked up today at a yard sale. There are quite a few neat tricks you presented in the video that I was unfamiliar with, great to learn something new even with about 45 handles under my belt. Thanks.

@NBCRGraphicDesign 2 жыл бұрын

Great work!

@mikederby9055 2 жыл бұрын

Awesome. Just in time for one of my projects.

@jujole9592 Жыл бұрын

You are an truly artist. Congrats.

@alexcarroll3565 2 жыл бұрын

Lee Valley tools!!! The best in North America.

@victorroios 2 жыл бұрын

Excellent!

@davidc6510 2 жыл бұрын

Beautiful work Bob. Thanks for sharing.

@andregiroux5199 2 жыл бұрын

Amazing. I love all your videos, but your tool making ones are my favorites. :)

@robertgroves6186 Жыл бұрын

Love the attention to detail! So many skills. I don't know that I need a draw knife but after watching this sure would like to build one!!

@andrewjohns6823 2 жыл бұрын

Excellent craftsmanship .

@rick91443 2 жыл бұрын

I too, love your tool build videos...Thanks a lot....rr

@glencrandall7051 2 жыл бұрын

Very nice tool. Thank you for sharing. Have a great day and stay safe. 🙂

@Rsama60 2 жыл бұрын

You built another beautiful tool. Working with a draw knife is a very satisfying thing I really like you side projects. You need to put a logo / makers mark on your tools. I make knives and a little bit of leather work too. I built some of my tools too, I fins this equally satisfying.

@TheArtofBoatBuilding 2 жыл бұрын

Hi Roland, I do have a logo stamp. Unfortunately it is to large to fit on the blade. I have done some leather work. You may have seen some is episode 47. I do plan on making a sheath for the knife, I ran out of time to include in this video. Perhaps I can put the logo on it. Thanks for your kind words. Cheers, Bob

@lunkydog 2 жыл бұрын

I enjoyed this video very much and it spurred me into figuring out the brand of my 4" drawknife which has faint markings. The handle shape and ferrules looked just like the Pexto, but I eventually found a place that had some vintage brands listed. Turns out it is a Jennings which I could still see the last few letters of. Interestingly, I thought it was ground shallower than the 20° you used, but I just measured it @ 25-26°. My larger ones would be my choice for the mast however.

@patrickkostka5103 2 жыл бұрын

Fantastic

@LakeSunset4 Жыл бұрын

Beautiful! I like it to watch your carefully working!

@TheArtofBoatBuilding Жыл бұрын

Thank you very much!

@tinkeringinthailand8147 2 жыл бұрын

Did you get a blackout around 15 mins or so ? ;) Great work.

@TheArtofBoatBuilding 2 жыл бұрын

Some kind of uploading glitch. Hopefully is fixed now. Thanks for watching

@bobsails9750 2 жыл бұрын

Thank you

@maciej.tokarz 2 жыл бұрын

Świetnie się ogląda Pana filmy! Dziękuję :-)

@TheArtofBoatBuilding 2 жыл бұрын

Nie ma za co. Tak się cieszę, że Ci się podobają. Dzięki za oglądanie. Dzięki, Bob

@dmitrade 2 жыл бұрын

Thank you Bob! Try to use it bevel down. You'll get more control. Good luck!

@TheArtofBoatBuilding 2 жыл бұрын

Thanks for the tip!

@andyZ3500s 2 жыл бұрын

The effort and craftsmanship that you put into your projects is a joy to watch. What are you using as a lubricant on your sharpening stone? All of my oil stones were completely gummed up with decades of oil. I finally degreased them all and started using Norton honing oil, which works great. At over $30 a quart it is on the expensive side though.

@TheArtofBoatBuilding 2 жыл бұрын

Hi Andy, I use a Spyderco Ceramic sharpening stone. The lubricant I was using is window cleaner. here is where I purchased mine shop.brownells.com/gunsmith-tools-supplies/metal-prep-coloring/stones/medium-ceramic-stone-sku824302002-12609-30326.aspx?cm_mmc=PPC- I have the medium stone. These are excellent stones that t seem to never wear out. I highly recommend them. Thanks for watching. Cheers, Bob

@stevefirst9521 2 жыл бұрын

Bob, The drawknife is my favorite tool and you made a beautiful one. I also like a small drawknife for fine work, but a mast seems like a fairly large project for a small knife. What is your thinking there? Thanks again for another fine tool demonstration.

@TheArtofBoatBuilding 2 жыл бұрын

Hi Steve, I have a large drawknife (8”) that I’ll use for the mast. The jib spar is only 1 5/16” in diameter so I will mainly use it for the small spars and gaff boom. Honestly, really don’t need it as a spoke shave would also work. Basically I really wanted to make one and know I’ll find many uses. Thanks for watching! Cheers, Bob

@tomtruesdale6901 2 жыл бұрын

You made a beautiful draw knife there Bob, lovely work. Are you familiar with the "bird's mouth" method of building spars? I have not built one that way but they appear to be a bit lighter than a solid mast.

@TheArtofBoatBuilding 2 жыл бұрын

Hi Tom, Yes, I'm familiar with bird mouth construction. I will be making my mast and spars solid. However, I will cover the other methods of mast construction in an up coming video. Thanks for watching! Bob

@MrRanginha 2 жыл бұрын

I want to see you sailing.

@TheArtofBoatBuilding 2 жыл бұрын

Me too!

@fernandojorquera9613 6 ай бұрын

Soy chileno y me gustan muchos sus videos, le agradezco la calidad de los mismos y lo explícito que son, ya que no manejo lamentablemente su idioma, tengo interés en hacerme un bastren y de todos los videos que visto carecen de un buen anclaje para las empuñaduras, sin embargo el diseño suyo del tipo roscado lo encontré muy superior o mejor dicho muy eficiente. Tendría usted el favor de comentarme cuantos grados tiene el bisel del filo de corte del bastren, esperando con gran entusiasmo su respuesta, de antemano muchas gracias.

@TheArtofBoatBuilding 6 ай бұрын

45º

@danielornelas7367 4 ай бұрын

What are those “holes” in your workbench? I’ve seen a few of your videos and there seem to be three of them. BTW, fantastic work!!!!

@TheArtofBoatBuilding 4 ай бұрын

Those are for bench dog clamps. Thanks for watching.

@danielornelas7367 4 ай бұрын

They look like router lifts under the table, I’ve never seen more than one in a bench

@barneygoogle4003 2 жыл бұрын

Another beautiful job. I forget - what's the purpose of heat treating vs tempering?

@thomasarussellsr 2 жыл бұрын

Heat treating make the steel harder to hold an edge longer. But it makes the steel brittle. Tempering brings it back a little, making it a bit less brittle, but does not take all of the strength out of it. Both processes affect the grain structure of the steel on a molecular level, and affect how well the steel can take and hold and edge and how quickly it becomes dull again or breaks/chips.

@barneygoogle4003 2 жыл бұрын

@@thomasarussellsr Thanks for that info., Thomas.

@yusufauliamrk181 4 ай бұрын

Sangat bagus pak❤

@TheArtofBoatBuilding 2 ай бұрын

terima kasih

@edwardfenwick1881 Жыл бұрын

Do you remember wherein Michigan you got your lumber from?

@TheArtofBoatBuilding Жыл бұрын

Johnson Workbench www.theworkbench.com

@LitoGeorge Жыл бұрын

Bob, great build. What was the use of the ferrules, apart from a finishing look?

@TheArtofBoatBuilding Жыл бұрын

The ferrule is to prevent the handle from splitting. Thanks for watching! Cheers, Bob

@LitoGeorge Жыл бұрын

@@TheArtofBoatBuilding thanks Bob, that's what I understood previously. But why would the handle split there if it's been drilled, the tang burned in and the tang glued epoxied in? There's no beating on the handle at that point and the tang tapers down right? TX

@TheArtofBoatBuilding Жыл бұрын

@@LitoGeorge you’re correct, one would not be hitting the handles with a mallet. However, it is possible that pulling on the handle ends and the blade catching on something the torque created might cause a crack.

@LitoGeorge Жыл бұрын

@@TheArtofBoatBuilding interesting. Well, I'll be using them on my restoration of an ancient blade. Thank you for your video, and comments.

@bonafideadventures8425 2 жыл бұрын

I had a bad spot at 15:33. I don’t know if anybody else dead too. Hopefully it was just on my end

@TheArtofBoatBuilding 2 жыл бұрын

Thanks for the heads up. Not in the original video. Some kind of glitch. Hopefully now fixed. Thanks again Thanks for watching even in the dark moments! Cheers, Bob

@jeffreynerdin3522 Жыл бұрын

The only reason why I can imagine you left the ends of the workpiece square was that you wanted people to see how you’d turned a square piece into round handles. Seems kinda silly. If you’d rounded the whole piece, you’d have had a much easier time shaping the ends without catching your chisel on the square edges.

@HKAbsolutus 2 жыл бұрын

guard takes a few hours with plywood , come on

@TheArtofBoatBuilding 2 жыл бұрын

Steve you are correct. I’ve had that project on my list for way to long. Thanks for the reminder as safely is important! Thanks for watching. Cheers, Bob