It has been a long journey in the making of this engine. I appreciate your support and patience along the way!!! Episode 1 : Piston and Connecting Rod kzfaq.info/get/bejne/jtCcicpzvsvMYJc.html Episode 2 : Gear & Valve kzfaq.info/get/bejne/bL1xetaYyajKhGQ.html Episode 3 : Crankshaft and Camshaft kzfaq.info/get/bejne/atZ5g9WjyN2xYHk.html Episode 4 : Engine Block and Cylinder Head kzfaq.info/get/bejne/nKt-jNiUrJepiZc.html Episode 5 : Carburetor, Flywheel kzfaq.info/get/bejne/bZqjicqdtamdm6M.html

This series was probably the coolest thing I’ve ever seen on KZfaq in a very very long time. You’re an extremely talented machinist and maker. Congrats on making this!!

I can’t imagine the feeling of relief when it started up, making engines is hard man

When he forgot to put the gasket, me: "My God, he's human!" . Amazing work!.

The precision of a watchmaker, skills of a machinist and the tenacity of a top notch Maker!

Me in 3am: Thats enough for today its time to sleep KZfaq Recommendations: Wanna see a small engine?

I've been waiting for this!

This is possibly one of the best things I’ve ever seen on KZfaq. I was stoked for the result!

A lot of painstaking planning, designing and thoughtful execution with perfectly manicured hands has gone into the making of this miniature engine. Good show.

Let's wait for the wave of millions of people in 5 years when youtube recommends it to everybody.

Assembling was like ASMR and when the engine starts it was like ecstasy. Masterpiece praises the master.

And here's where we see genius level assembly. It's beautiful.

This has to be the coolest thing I’ve ever seen! Kudos

Ever thought about getting the pieces manufactured and selling it as a kit? Would be a fun project for people

Folks, let’s just take a moment to appreciate what this very talented man designed and created. Those who have any experience making even the most simple projects will know what we are seeing. Absolutely amazing.

I appreciate this marvel of delicacy and all that research, knowledge and calculations behind this small thing.

absolutely lovely build, looks so good. two things I would like to see. tidy up axillaries to match the build quality ( tank and ignition) and a load, fan, friction plate or dyno

I will be studying Mechanical Engineering at University, starting from this year and I am extremely inspired by the simplicity and elegancy of your content. Thank you so much.

It is so wonderful when seeing it works. I used to have a dream of making a 4 stroke engine like yours. But after watching your whole complex process. I just give it up.

being a mechanical engineer...i appreciate your work man ❤️

Beautiful hands, beautiful creations. No really. I have never see any engineering/mechanic with such beautiful hands. 👍🏼👍🏼👍🏼❤️❤️❤️❤️

Amazing. I was wondering the entire time “How’s he going to ignite the fuel?” The magnet, timing disk, everything just blows me away

Wow man. Just wow. ❤️ I now have a whole new level of appreciation for my bike and all the effort and engineering that went into making it possible. You are amazing...

You, ,sir, are amazing. I watched from episode 1 and I am blown away by your immense talent. I definitely subbed. I can tell that a lot of love went it the making of that fantastic engine!!

Beautiful craftsmanship! Thanks for making this and sharing it here!

I really appreciated that you did not edit out that you forgot one step (the gasket) to show us your human and yet you built a perfect working model using a lathe. No casting involved. The spark plug was the only part you might have liked to build, perhaps. Great visual appeal. Thank you Maker B. From a Kiwi bloke.

I came here so many times. I started thinking something had happened to you. Thanks to heaven you are ok and we've got this video! This series was a special and awesome masterpiece!

Sad to see this series end! Wonderful work and can't wait to see what you do next!

If this will be on Amazon in decent price range with a booklet for parts and steps, I will definitely buy it as the engineering and designs are nicely done and I want the world to actually learn stuffs to make by themselves.

True masterpiece! When I saw the thumbnail for a second I thought this is a professionally made engine. Now I remember this is the engine build video I was waiting for all this time. Thank you kindly.

Oh it's a beautiful miniature Briggs flathead. I'm in love.

That has to be a great feeling when an engine you made from scratch fires up and runs for the first time. I would so love to do that.

Fit and aesthetics are so perfect Really exciting

This is one of the most beautiful engines, for looks and sound I think I've ever seen!

全てのパーツがきっちりとはまっていく様はとても気持ちが良いですね そしてかっこいい！！

Amazing videos, I get hypnothized watching. I would love to watch a video of you showing your machinery and its features. Some times I cannot tell what is CNC and what is not, mostly because you definetely can do every piece with your own hands.

stunning, couldn't stop watching the series, thanks so much for sharing your work

Finally assembly!!! I've been waited for this for so long!

Oh my God. After watching this be built, all I have to say is I'm amazed. This build is on a completely differently level, and you are extremely talented for being able to create something like this. I know I will almost never be able to make something like this, but I'm still inspired to make something great after seeing this.

I can't even describe how amazed I am. Good job man! 👍👍

Fabulous doesn't seem to describe the detail in this production.

see you all in 5-10 years when youtube recomends this to everyone

I discovered engine mechanic by working on a old BMW seeing it here in miniature is mesmerizing. Thx for the elegant video, congrats for the work it's high level!

Dude, that was so neat. I just binge watched the whole series in one sitting. You've inspired me to create my own (virtual) engine using my own MockMechanics software. If I succeed I'll make a video of it. Again, very inspiring and amazing work!

Oh wait... this actually works?!? I tough you are doing a modeo of a 4 stroke engine not a actual working one. This makes the series soo much fun to watch for me now

I have always wanted someone to do some thing like this! Make an engine that uses real fuel. And you did it!! So freaking cool!

That was equal parts impressive, interesting and relaxing to watch.

The best ever video (including first 5 parts) on youtube. Will be sharing to everyone!!!!

Seriously... amazing bro...I didn't expect this motor sounds as real as a perfect engine...way to reach bro....✌️❤️

エンジンかかった時の音が思ってたよりはっきりした音で感動した！ こんな小さくても一生懸命動いてる姿はまるで生きてる様だ... エンジンはまさに命ですね、素敵です！

I am deeply impressed.This is a great job. I have rarely seen anything so interesting on KZfaq.

Very neat and clean work buddy. I have never seen such a clean mechanical work.

That was fascinating to watch! Thank you for sharing this with us!

Amazing! Wow so impressive your engineering skills, design, machining, assembly, all filmed, and edited into a fascinating series, many thank yous :)

Fabulous, that’s a piece of art I’d pay to see. A true engineer.

So good I watched the playlist twice. Superb stuff man.

Nice build. Must have been really gratifying to finally see it run.

Really really nice job. I enjoyed every single video and I'm impressed from your work, how good everything fit and how nice it looks.

This is literally the coolest thing I’ve ever seen on KZfaq I’m serious

Thank you so much for this series, so educational, so cool, and so cute!

Coolest series I've ever seen on youtube. Great journey, cant wait for the next!

I’ve been waiting for this too! Absolutely incredible! I hope you are proud!

Great job! The best small engine prototype I have ever seen.

Layman(me) can understand. Very good engine assembly.I saw all videos from beginning.I learnt lot.Thank you so much...

Beautifully made 4 stroke engine,well done!

"I forgot this gasket." Glad you included that, it made me laugh!

加工の技に感動しました。内燃機関の構造が神秘的で、魅了されました。

Quel talent ! Il y a du génie dans cet art de la mécanique et un talent fou à le mettre en scène. Bravissimo !

Awesome work, glad it’s finally done and working perfectly

finally, the End!! super great and congratulation!!

I smiled in joy when the engine started. :) Thanks for making this video.

Thank you for educate us.I am mechanical engineering student was searching for this type of video since long time

That's the cutest miniature engine I've ever seen someone making.

평소에 이런 영상들 자주보는데 이영상이 가장 흥미 있었던것같네요!! 이런 영상 만들어주셔서 감사합니다!!! 구독 하고 갑니다~

WOW, just wow. You are a true craftsman.

When the engine wasn't running, I feel betrayed at first, then as it revved, I thought my purpose of this video was served. Thanks mate.

Great looking engine. I thoroughly enjoyed the series.

feels really comfortable

Absolutely brilliant. Wish I had the patience and skills

Love your videos, I’m gonna try to watch more of em soon!

you ducking built a engine from scratch FROM SCRATCH !!!!!!! that is sick the engineering the math and energy that went into machining is insane !!

I haven't watched something without doing anything besides that in a long time. Great series!

Thank you for sharing this with us!❤️

I loved this. The only thing it was missing for me was a massive BBBRRRRRAAAAAPPPP of the throttle. Congrats

For an addicted that's amazing. I love it, really great video, congrats man!

만드는 과정에서 놀라고 실제로 구동되는거에서 뒤집어짐 진짜 6편 순식간에 다봤어요

WoW!!! Amazing. So much skill and creative talent... Truly a master craftsmen...

It's a nice video to watch even the second time. Very nice small engine. Peaceful video.

Whoa you just started with your hand! That's amazing, that's just a prof off the level of quality of this engine

Fantastic 😎

어떠한 알고리즘이 저를 이곳으로 데려왔습니다... 정주행 하고 갑니다.... 와......... 대단... 대단... 형님 존경합니다...

I know an RC pilot who builds his planes from scratch. When he could not find a suitable engine for one project, he took a machining course at night and eventually built his own two stroke glow fuel engine. I call that hardcore.

I agree with all people in comments, best series on yt, when the engine started, i just started smiling from happines, congrats man!

Not only is the machining impressive, but I love that the engine uses spark ignition rather than compression ignition. Also having the ability to advance/retard the ignition is really nice.

Wow 천재입니다!!! You are genius ㅎㅎㅎ

Must have been so satisfying finishing this gem.

I like this because I’m 20 and this gives Me a better perspective of engines

That's a thing of beauty..... Genius..... waiting for more....

The video is very interesting and very clean, really this is an interesting thing that I have found on KZfaq, hopefully the next video will be made again but 2 cylinders or more, it should be even more exciting

Been wanting to make one of those since I was 14 yrs old! Loved it!