🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

Sorry, I cannot.

Thanks Lee! I have been designing an 8x10 camera which this set of bellows was made for but once this school year started I've been tied up in classes and away from my tools. Most of the camera has been designed but I still have to figure out the film holders. One of these days I'll get back to my tools and build something.

+Geoff Mulberry Is this all just done on your own calculations or do you have any guidelines to follow? I am going to be replacing my bellows on a Toyo and am very impressed with your final result. If you have any recommendations for plans to follow, please let me know, Thanks in advance.

+Lee Latin Yes so far everything is from my own plans. The bellows were the first part of the design and I used the measurements from the actual finished product to design the rest of the camera so everything fit nicely. If you have the remains of the old bellows for the Toyo it should be pretty simple to copy what's already there. Designing a bellows for an already built camera seems a little harder. Just remember to factor in the fact that the folds add some thickness.

Glad it was useful! A blackout curtain from Walmart believe it or not. It has a thin white layer on the back that is opaque rubber. It was the thinnest material I could find locally that was still opaque and wasn't some ridiculous color or pattern.

I've used plain, black broadcloth for both interior and exterior ($5/yd USD). The small gaps between the stiffeners should prevent light from getting through. You could glue down a layer of black tissue paper before the exterior layer if needed. I've never needed to do that, though.

+Richpence Thank you! The black/white fabric I used was a blackout curtain. It's quite thin and also opaque so it makes a perfect material for a bellows.

Probably would be ok depending on how thick you go. It's a tradeoff because if the stiffeners are too thick by themselves then the bellows won't be able to compress very thin.

They're made out of two layers of poster board that are glued together. My guess is they're probably about 30 thousandths or 3/4 mm.

+Geoff Mulberry Thanks Geoff. Would love to see the finished product when you have it completed...!!

mitklaus, thanks. I believe I used 3M Super 77.

The measurements will depend on your camera (I've made several for antique/vintage Eastman 5x7 and 8x10 cameras). Not only does it depend on the size of your lensboard at one end, but also the extension of the bellows. A stiffener size of 5/8" - 3/4" seems to be a good size. The smaller you go, the more pleats and the thicker the bellows will be when it compressed. A heavy construction paper works, but you may want something a little thicker. A 1-foot section of bellows will have about 30 stiffeners on each side, so you can get an idea of how thick it will be when fully compressed. Add 50% for the 2 layers of cloth. Black cotton broadcloth will work fine for the interior; black or red broadcloth will work for the exterior. Fairly cheap ($5 USD/yard). If you can find 0.3-0.5mm vinyl-covered fabric, that will work for the exterior and will be more resistent to water, stains, wear, etc. than broadcloth. Spray adhesives work well. Contact cement is way too messy. In the video, Geoff used angled corners for all stiffeners. You can use square corners as well; alternate a section of angled stiffereners with squared stiffeners. It reduces the work a little bit. It's critical that you get the stiffeners evenly lined up and equally sized. Any error will be magnified as your bellows gets larger and longer. Note that he used one section as a pattern for the other 3. The cloth, construction paper and spray adhesive will cost about $25 USD for an 8x10 bellows with 24" extension. Far cheaper than the $200 USD you'll find on eBay. While no one wants to waste money, you can essentially practice 2 or 3 times and still save a great deal of money over professionally-made bellows.

Pepe Guitarra the white stiffness are made of poster board. The black/white fabric I used was a blackout curtain. It's quite thin and also opaque so it makes a perfect material for a bellows. I don’t think it is waterproof.

@@geoffmulberry Thank you very much.

I really enjoyed it.

nah this was super fitting for the scene