Making a Circular Saw Crosscut Jig

Рет қаралды 531,060

4 жыл бұрын

How I made my DIY circular saw crosscut jig or circular saw guide.
/ wrkshop71
To access the free project tutorial for this project and others from my channel, visit the link below:
www.wrkshop71.com/project-tut...
Materials List:
-----------------------
2 x 33.7mm Diameter steel pipe 2.9mm wall thickness.
- No.1 fixed pipe-length=990mm - No.2 adjustable pipe-length =1080mm
4 x Plywood Vertical supports for the pipes-205mm H x 45mm thickness
2 x 165mm Wide-Fixed pipe supports. 2 x 155mm wide adjustable pipe supports.
Top corner chamfers ~55mm long ~45 deg angle.
1 x 16mm plywood sheet 600mm W x 990mm L
1 x 16mm plywood piece for saw stop - 400mm L x 54mm W
1 x Circular Saw 185mm blade. Steel base plate of saw 280mm L x 140mm W
2 x Steel L angles 30x30mm 358mm Long.
2 x Laminated 18mm plywood 283mm L x 105mm W
2 x Pine Stud 70mm H x 45mm W x 283mm L.
2 x Pine stud 70mm H x 45mm W x 800mm L.
2 x Pine Stud 95mm x 45mm x 600mm L.
1 x Pine Stud 70mm x 45mm x 410mm L.
2 x M8 bolts 70mm L. 2 x M8 bolts 60mm L. 10 x M8 bolts 100mm L.
4 x M8 bolts 80mm L. 4 x M10 washers. 10 x M8 Long nuts (24mm L)
16 x Abec 7 Carbon steel Skateboard ball bearings(M8 bolts fit inside)
22 x M8 Nyloc nuts. 8 x M8 standard nuts. 8 x 110mm Torx head screws.
4 x 40mm L x 25mm W x 3mm Thick steel used for brackets
1 x 123mm L x 25mm W x 3mm Thick "" ""
4 x 61mm L x 25mm W x 3mm Thick "" "". 26 x 45mm Timber screws
4 x M5-10mm L Round head hex socket bolts.
The clamps are not included in this list only the nuts and bolts used for the 2 end clamps. The Clamps could be made of metal or something else other than plywood. The end clamps are 45mm H x 130mm L.

Пікірлер: 70

@guerradan1958 3 жыл бұрын

I was really happy to see how you built the circular saw Jig! Thanks now I build one.

@krisconroy285 3 жыл бұрын

Your hand build machine is excellent. It’s strong sturdy and robust and I expect you will get many years of accurate cuts from it. A good product made from good materials. Thanks for sharing your skill and wisdom. 😀🇬🇧

@bryancrawford3498 3 жыл бұрын

Looking forward to more!

@nathalieheytens5777 3 жыл бұрын

Very interesting design. Looks quite robust and executed with good quality materials, but yet nothing too fanciful or overly expensive. I think it can be replicated by anyone with a bit of skill to make an accurate crosscut jig. Thanks for posting! Good luck to you.

@intertekrus6179 3 жыл бұрын

Отличное приспособление получилось.

@Rebel1280 2 жыл бұрын

Very quality built, i like the angle addition, a little to much for my needs but im definitely going to implement than angle adjustment.

@eduardo16oliveira8 3 жыл бұрын

Muito bom... parabéns...

@kryten4k 4 жыл бұрын

That was Awesome to watch! Very good rig!

@davaxbelmondo9710 Жыл бұрын

yooo, good job - perfect for a small workshop

@lighthouse7138 2 жыл бұрын

Great idea 👍👍👍

@oskarfeldmanis7736 3 жыл бұрын

cool to watch.

@ljose007 2 жыл бұрын

Very nice!

@rickeaston3228 3 жыл бұрын

I have never seen any thing built so complicated to do a simple task!!!!

@jason4547 3 жыл бұрын

The terms "Complicated and Simple" are relative to the individual. People who build such things are process oriented people whom enjoy the planning and building more than the final product itself. You really should stop projecting yourself onto others... O.o

@wrkshop71 3 жыл бұрын

@@jason4547@rick easton I also like the finished product. One of the reasons I built the saw was because I had trouble getting consistent accurate cuts with a cheap table saw.

@sajadwoodwork 3 жыл бұрын

Nice work sir please keep it up

@boxdor100 Жыл бұрын

good job still tons of work and craftmanship skills ....some linear bearing will do the job better I think but this is affordable to built

@RonPiggott 2 жыл бұрын

Brilliant

@user-xg8pp4xk7h 3 жыл бұрын

Профи ! Класс !

@jemo_hack 3 жыл бұрын

-nice practical and not like the other “really” expensive Aluminium builds out there! Congrats.

@morty_mcfly 3 жыл бұрын

You're talking about JSK-Koubou ?

@ALDRUMSTICK Жыл бұрын

Очень даже круто!👍

@JoseaneSilva 2 жыл бұрын

NICE IDEA🤩

@edivalleitebertulinobertul315 3 жыл бұрын

Boa ideia

@user-xg8pp4xk7h 3 жыл бұрын

Круто !

@j.m.castilla7150 2 жыл бұрын

Gran maquina Gran trabajo Pero mejor rodamiento u grove

@manuelmarasigan8990 3 жыл бұрын

nice project but he is the one that knows how he do it. thanks for the video anyway. very hard to follow.

@wrkshop71 3 жыл бұрын

Hi Manuel, I am currently building a website and I will be creating free plans for this project and the crosscut jig so they will hopefully be easier to be build for those interested.

@vladimir51ful 3 жыл бұрын

Installation is good! But in a wide shield, as it seemed to me, the angle was not too right, or am I mistaken?

@wrkshop71 3 жыл бұрын

Hi Vlad, I'm not sure what you mean by wide shield? But the cutting angles are good I use this saw more often now than my metabo miter saw.

@vladimir51ful 3 жыл бұрын

@@wrkshop71 Well, maybe it's the wide Board that you used first. The machine is very good, thank you !

@ilmarmariano2375 3 жыл бұрын

The project is excellent. How to acquire the list of materials used with your measurements My name is Mariano.

@wrkshop71 3 жыл бұрын

Hi Mariano, I will put a list of the materials in the video description. However your circular saw may not have the same dimensions as my saw which could change the other dimensions in the design.

@AhmadSaiqal 3 жыл бұрын

طيب

@woodworks3585 3 жыл бұрын

This is excellent. I will make one with a few mods so then I will use my Evolution Skill saw so I can cut small sheet metal etc. Thank you for sharing your talents. I have Subscribed. 👍👍👍👍. Stay safe out there....

@wrkshop71 3 жыл бұрын

Hi Whitley, Yes. I have also ordered a makita metal cutting saw and plan on making a metal cutting version of this project as well. But that is probably next year as I have other projects already in progress that will finish out 2020. Thanks for subscribing.

@therealfocusin 2 жыл бұрын

Superb super neat design extremely functional and with materials that are very easy to find. Loved this build! I'm subscribing.

@tourvillecharles551 3 жыл бұрын

👏👏👏👏👏👏👍👍

@yasseradly5803 3 жыл бұрын

الحمدلله ماشاءالله الحمدلله

@bahoz6310 3 жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍

@josenava5091 3 жыл бұрын

My bien heche. .como lo hiciste..? Solo tu saves. No entiendo si lo hiciste para presumir o para ensenar.

@wrkshop71 3 жыл бұрын

Hi Jose, I built the jig because I needed to make accurate cuts which I wasn't able to do using the cheap table saw I had. I made the video because I wanted to show a different way of making a circular saw crosscutting jig.

@fernandosantos8460 11 ай бұрын

ME MANDA O SEU ENDEREÇO PRA VC FAZER UMA PRA MIM BELO TRABALHO PARABÉNS 👋👍

@user-re9dg6oe7h 2 жыл бұрын

👑👑👑👑

@ahmedadly4817 2 жыл бұрын

الحمدلله

@olivierpuvilland1497 3 жыл бұрын

Excellente vidéo, mais pas une seule mesure, pas une seule cote.... Comment le construire ?????? C'est vraiment désolant.

@wrkshop71 3 жыл бұрын

Bonjour Olivier, j'ai épinglé un de mes commentaires qui reprend la liste des matériaux et les dimensions des différentes pièces. La vidéo montre comment je l'ai construit. Mais peut-être que vous le feriez différemment ou à votre manière. Ce n'est pas vraiment censé être une vidéo d'instruction étape par étape. Quand j'ai fait la vidéo, je ne pensais pas que tant de gens la regarderaient.

@ralucia613 Жыл бұрын

O logaritimo esta cerceando o meu áudio do fone

@Quad-hk8ox 2 жыл бұрын

great... but try to cut across board , 10 cm long and 5 cm to 2.5 cm ... 😉

@wrkshop71 2 жыл бұрын

That's what a miter saw or table saw is used for. My crosscut jig was primarily designed to cut plywood sheets.

@wellwhatthen10101 2 жыл бұрын

Well made but over the top for a crosscut sledge not a fast job

@bonnykhan5365 3 жыл бұрын

Awesome but ribet prosese

@user-fr9zl5pm8s 3 жыл бұрын

парадокс . на церкулярке делает церкулярку

@pablo-jc2qs Жыл бұрын

They little noises are neat

@wrkshop71 3 жыл бұрын

Visit wrkshop71.com to access the free tutorial for this project and others from my channel. Materials List: 2 x 33.7mm Diameter steel pipe 2.9mm wall thickness. - No.1 fixed pipe-length=990mm - No.2 adjustable pipe-length =1080mm 4 x Plywood Vertical supports for the pipes-205mm H x 45mm thickness 2 x 165mm Wide-Fixed pipe supports. 2 x 155mm wide adjustable pipe supports. Top corner chamfers ~55mm long ~45 deg angle. 1 x 16mm plywood sheet 600mm W x 990mm L 1 x 16mm plywood piece for saw stop - 400mm L x 54mm W 1 x Circular Saw 185mm blade. Steel base plate of saw 280mm L x 140mm W 2 x Steel L angles 30x30mm 358mm Long. 2 x Laminated 18mm plywood 283mm L x 105mm W 2 x Pine Stud 70mm H x 45mm W x 283mm L. 2 x Pine stud 70mm H x 45mm W x 800mm L. 2 x Pine Stud 95mm x 45mm x 600mm L. 1 x Pine Stud 70mm x 45mm x 410mm L. 2 x M8 bolts 70mm L. 2 x M8 bolts 60mm L. 10 x M8 bolts 100mm L. 4 x M8 bolts 80mm L. 4 x M10 washers. 10 x M8 Long nuts (24mm L) 16 x Abec 7 Carbon steel Skateboard ball bearings(M8 bolts fit inside) 22 x M8 Nyloc nuts. 8 x M8 standard nuts. 8 x 110mm Torx head screws. 4 x 40mm L x 25mm W x 3mm Thick steel used for brackets 1 x 123mm L x 25mm W x 3mm Thick "" "" 4 x 61mm L x 25mm W x 3mm Thick "" "". 26 x 45mm Timber screws 4 x M5-10mm L Round head hex socket bolts. The clamps are not included in this list only the nuts and bolts used for the 2 end clamps. The Clamps could be made of metal or something else other than plywood. The end clamps are 45mm H x 130mm L.

@IzarJr 3 жыл бұрын

Thank's

@shinibekturdibek4750 3 жыл бұрын

¹ ¹11 1

@sixoffive Жыл бұрын

Thank you, I have been looking into table saw alternatives.