Making a Crazy Part on the Lathe

Making a Crazy Part on the Lathe - Manual Machining

Рет қаралды 16,476,487

2 жыл бұрын

In this video I'm making a crazy spiral part on the lathe out of a piece of brass. I'm using this part as a pedestal for the stainless steel 8 ball that I've made. 8 ball video link below.
I hope you like my work and the video.
8 Ball video: • I make an ''8 Ball'' o...
Huge thank you to all of my Patreon and PayPal supporters and especially to:
Tonya M Broerman
Adel AlSaffar
afreeflyingsoul
Yale Baker
Alex McGeorge
alialy
Alistair Moor
Amanda Moore
Amar.k
Anthony Eufemio
Arthur
Bendurion
Brenna Redpath
Chris walter
David Barker
Edward Conway
Glenn Soucy
Haitham Al Zir
isaac
james lowe
Jean Ceppi
John Shebanow
Josh Denny
Josh Ledford
Josh Wasserman
Joshua Bentley
Joshua Scher
Kar Marsten
Lambda GPU Workstations
Leo
Matt Boothman
Mellissa Marcus
Monte Gibbs
Nathaniel Carver
NoLoneSurvivor
Pat Thrasher
Peter Riddett
potokslow
StevenVR
Tyler Carruth
VaushVidya
Vickie Bligh
Vince Valenti
Will Black
William Bennett
Xavier Carbel
Yuri Zapuchlak
Adam Holtzclaw
Alipasha Sadri
Andrew Egerton
Andrew Phillips
Arni Bjorgvinsson
Bonnie Williamson
Brian Hoerl
Chad Bryant
Crystal Cash
Daniel Trejo
Daniel Varga
Dave Cannon
Dave Hardware
David Ebert
David P Hruska
Diriector_Doc
Gene Gonzalez
Geoffroy
Grant Daniel
Grok Senften
Haley McFadden
Hunter R.
Jack Curry
Jason Koi
Jason Tarlov
Jeremy Cole
Joël Franusic
justin f.
Ken Rosso
Kurt Gazow
L Rlta
Liam Rafle
Marc Cerisier
Marc Staedelin
Mary Casella
Mellissa McConnell
Michael Beck
Micheal Bier
Michael Lamp
Nik
Pasacal Schmikal
Pelec
Peter Cyprian
Raymond Romani
Rebecca Miller
Regis Vincent
Rich Linton
Robert Todd
Sarah Langlais
Scott Marshall
Simon
Stefan Kronander
Steven Michalcewicz
Steven Stowik
Suiros
Svenja Kuckla
Tim Holt
Trevor Kam
Tucker Ifft
Victoria Emmenegger
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ mymechanicsinsights
My Patreon Page:
/ mymechanics

Пікірлер: 3 700

@PSUK 2 жыл бұрын

I’m 63 and an old school fitter/turner by trade and I’ve NEVER seen this done! In fact I’ve never even THOUGHT of doing it. Simply incredible!!

@macdeep8523 2 жыл бұрын

He is next to God

@sycolution 2 жыл бұрын

@@macdeep8523 Gotta be honest, I thought he was gonna be!

@jimdavis3752 2 жыл бұрын

Yes and it's so incredibly simple considering there's no need to follow someone else's drawing.

@ebramnady2250 2 жыл бұрын

You are from Ukraine.What is your name?

@PSUK 2 жыл бұрын

@@ebramnady2250 I am not in Ukraine. I am in UK and I am flying that beautiful nation’s flag in support.

@mchall86 2 жыл бұрын

That has got to be one of the coolest “because I can” pieces ever made!

@US-SKILL Жыл бұрын

Hello

@m1.741 Жыл бұрын

😚

@m1.741 Жыл бұрын

🤨

@distraughtcat Жыл бұрын

(The reply above me is an emoji, nothing else) [in the voice of David Attenborough] Here we see a wild 9-year-old attempting to communicate on the internet. However, the use of only emojis makes it impossible to understand. Is it a mating call? A call to the rest of its pack? We may never know.

@brianclingenpeel5123 Жыл бұрын

THATS what this is!

@Lwimmermastermetalart Жыл бұрын

Quite clever. I’ve been a toolmaker for over 40 years. Never too old to learn new tricks. Well done sir.

@sulaimanfahad8646 Ай бұрын

صكصكصكصكصحصححضحضضضحضضحضحضححضحضضضضضضضضضحضضضضضجضحض

@AkaizWoof Күн бұрын

How much do you think this machine cost? The accuracy is so impressed

@user-bc7cb8uu7e Жыл бұрын

I love the way that there's one disc at the center of rotation in some of the shots that is stationary as the rest of it spins. It looks really cool.

@jtris01 Жыл бұрын

Pretty similar to standing waves!

@kinbolluck476 11 ай бұрын

Thats what she said

@DG19Main 11 ай бұрын

@@kinbolluck476 💀

@MudSharkDanceLesson 2 жыл бұрын

This video is the perfect example of why I love machining videos, I just wish every machining channel on youtube took the time and effort to achieve the level of cinematography that you've accomplished here. Well done

@lovehatecomments 2 жыл бұрын

Agreed.

@mymechanicsinsights 2 жыл бұрын

Nice to hear that, thank you very much :-)

@zumbazumba1 2 жыл бұрын

There are 2 types of machinist content on youtube-ones that make theatrical entertaining videos and the ones that make boring videos full of knowledge. Plenty of people that watch all kinds of diy videos but they will never do any of them on their own.They watch it out of boredom.And then there are minorty of people that watch specific video on subject to help them in their work.For example how to make pipe reduction or bend a pipe correctly. Mechamozg and joe polishlastnameicantwrite make knowledge videos ,clickspring makes typical entertaining moneyshot videos.

@christopheryniguez825 2 жыл бұрын

Couldn't agree more.

@littlejackalo5326 2 жыл бұрын

If ever KZfaq machining video had this level of cinematography, there wouldn't be so much information and knowledge on KZfaq from Master machinist. These types of machining videos obviously take weeks of filming and editing to get put out. The people that just want to see milling machines cut metal, and lathes turn off chips, are just hipsters that want to watch "oddly satisfying machining videos." Most machining content is for Machinists who are trying to learn. It's not for hipsters to watch so they can feel like they're connected to the trades, act like they know about actual work, and act like they know about machining because they watched a few KZfaq videos. This style of videos are strictly for entertainment, not education.

@nastystang113 2 жыл бұрын

Absolutely gorgeous work. I work in the aerospace industry at the Kennedy Space Center. I had to show some of the machinists this video and they were all in love with the design as well as your execution of a goal and how it turned out. Bravo. 👏

@mymechanicsinsights 2 жыл бұрын

Wow, thanks!

@__skillz 2 жыл бұрын

Can I get an internship please?

@brainfarth 2 жыл бұрын

Any room for a well rounded welder fabricator cnc guy there?

@JustAlanIsCool 2 жыл бұрын

@@brainfarth Stennis Space Center is relatively close to me, they had an opening for someone to work a printing press, best I could discern from the posting. They wanted someone experienced with government presses and was also a journeyman welder that was a master at Tig. Those were the 2 biggest hurdles, because I'd think veteran welders would be welding, not working printing presses, and vice versa but idk. At any rate, I had ~7yrs experience as a machinist in the field, could always pull more than my own weight in the shop, programmed multiple machines and ran them on my own shift for a while even but that wasn't nearly enough to get Stennis' attention. Iirc the pay was like 34/hr, if not higher, and I was making under 20/hr so I had to at least try lol

@JNFGAMBLER 2 жыл бұрын

3 jaw versus 4 jaw.....please tell me that the "aerospace industry at the Kennedy Space Center" has a lathe with a 4 jaw chuck and doesn't turn everything in a 3 jaw....Bravo if they invested in a 4 jaw!

@newstart49 Жыл бұрын

Thanks for a great learning experience with no obnoxious music, long boring and unnecessary details. The video showed all that is need to do this project. Excellent! I never thought of setting the 3 jaw like that.

@alexander-b 2 жыл бұрын

I have a friend who's been doing machining for some 45+ years. He has his own shop and all. You're the second person I've seen making this kind of part. I saw him making an almost similar part for a cargo ship. The captain of the ship thought it had to be done by molding but my friend told him he can cut the piece from a chunk of metal. After seeing the part the guy's jaw was dropped. This was around 30 years ago. Great work. Thoroughly enjoyed watching it.

@kylemilford8758 Жыл бұрын

Cars crankshafts are made in a Similar way. Definitely cool!

@bartimisfoul3459 2 жыл бұрын

I love how this video showed everything we needed to know in less than five minutes. Bravo!

@mymechanicsinsights 2 жыл бұрын

Thanks for watching, much appreciated

@PureSkillOfficial 2 ай бұрын

you are amazing plz guide me i am also making videos on different things making in Pakistan please visit my channel and check my work @@mymechanicsinsights

@HanginInSF 2 ай бұрын

At 2x speed I learned in 2 minutes

@TheBrandoGR 2 жыл бұрын

"Learn the rules like a pro, so you can break them like an artist." -Some important artist, probably

@nunyabiznez6381 Жыл бұрын

My great, great grandfather was a master machinist and wrote a treatise 150 years ago on what he called "offset cam turning." While I also pursued a career in machining, I never got any sense of what his treatise was about until I saw this video. Thanks for posting.

@whybecauseweedbro8392 Жыл бұрын

As a machinist and metallurgist, I really like this and have done similar things. I specialized in manual machines like Bridgeport, and lathe machines. But also E.D.M machines and CNC machining. And loved experimenting with what you could make with them

@deanchovan6604 2 жыл бұрын

I'm 92, and manual machined something similar back in the day. You do beautiful work.

@52006 2 жыл бұрын

92s Omg

@jayyhick65 2 жыл бұрын

wow you've been Blessed my man

@matthewp1682 2 жыл бұрын

92 and using youtube?

@user-jn3zs9or4j 2 жыл бұрын

@@matthewp1682 yeah my grandpa loves mrballen

@matthewp1682 2 жыл бұрын

@@user-jn3zs9or4j ya my grandma is 102 and she loves stevewilldoit and mrbeast

@maxcactus7 2 жыл бұрын

I'm only 2:20 seconds in and my brain already hurts trying to understand all the math involved in defining that shape. Just brilliant work and a proper pedestal for the 8 ball!

@mymechanicsinsights 2 жыл бұрын

haha, keep watching ;-)

@BabaG 2 жыл бұрын

Your brain hurts, you realize he did this after buying stock in pain meds company, knowing he will make brain hurt & then pain med company stock goes up :)...

@ebreshea 2 жыл бұрын

@@BabaG stonks. That's even more of a big brain move. Trying to understand that level of foresight makes my brain hurt even more, further increasing stock prices and the cycle continues!

@bobtheblob2770 2 жыл бұрын

like a scrolling sine wave

@maxcactus7 2 жыл бұрын

@@bobtheblob2770 YES! And a small, offset, segmented cylinder inside a larger cylinder. It's a sublime optical illusion when it's rotating around it's Z axis.

@scottchappell3193 Жыл бұрын

I've been in engineering for 40 years and this is the exact reason why I love the trade so much,the possibilities are endless,absolutely love this,we'll done for thinking outside the box,I must have a go at this myself in my shop after everybody goes home for the day

@barrieaarons6517 2 жыл бұрын

I was most impressed with this offset metal turning video. I decided to use the technique using 42 mm diam. Aluminium. I modified the ends (since I'm not a billiard player or golfer) putting a fancy knob on top and knurling the base. The result was vey pleasing and makes a nice ornament/ talking point in my home.

@subbaraod45 2 жыл бұрын

As engineering students, we learnt the beauty of lathe machining - it is a great art - and society is indebted to men behind these machines who made our lives easier.

@cor.tenebrarum Жыл бұрын

Especially, that lathes can kill in the most gruesome way. Hands down the most fucked up gore I've ever seen.

@thecandyman7807 Жыл бұрын

@@cor.tenebrarum at least it can kill quick, or just give a little mutilation.

@josuedavid3786 6 ай бұрын

@@cor.tenebrarum You saw that Russian guys video too?

@naysayerck5971 Ай бұрын

Lathes are terrifying

@HDitzzDH 2 жыл бұрын

2:27 Kind of cool to stare at that one disc that’s basically stationary in the middle when rotating. But I would really love to see the math behind this. This could make for a very cool candle-holder

@snowstrobe 2 жыл бұрын

It was the exact centre, so he got the maths exactly right. So cool.

@macnitro902 2 жыл бұрын

@christopherbedford9897 2 жыл бұрын

Just look for "helix"

@beyondwhatisknown 2 жыл бұрын

It's just geometrical. Keep watching the video, think about everything, and you'll figure it out. Otherwise, show this to any trig math teacher who can explain sine waves. Or study sine waves yourself.

@Dead_Goat 2 жыл бұрын

Bruh there is no math involved.

@vikasjsheth 2 жыл бұрын

I have done Lathe turning in Engineering workshop for many years...never thought this could be done!!! BRAVO!!!!

@ohla Жыл бұрын

I used a Lathe for the first time today. Fun experience but I realised just how long and stressful of a process it is. I also burnt myself so many times because of the "metal shavings". You have all my respect for this video.

@stepheno1870 2 жыл бұрын

The most amazing thing I have seen turned on a metal turning lathe, simply brilliant😮👍

@mymechanicsinsights 2 жыл бұрын

Thank you very much!

@sawboss5794 2 жыл бұрын

Incredible!

@NioneAlmie 2 жыл бұрын

It's especially awesome, because that 8 ball is my fave video on his channel. One of my faves on youtube in general.

@leadgindairy3709 2 жыл бұрын

You ought to look into 5 Dimensional CNC lathes timelapse videos, if you want your mind blown at least. But for just doing this by eye and by hand, this is awesome too in its own way!

@dwhelan88 2 жыл бұрын

I was wondering how you were going to offset the part in a 3 jaw chuck.

@paulmix3858 2 жыл бұрын

This is funny and entertaining to watch. Now I'm retired, but I worked 43 years in a metal workshop milling, turning, boring, welding and so on. First 10 years with manual machines and then with CNC and CAD/CAM. I think metal working (same as woodwork) is a bit underrated profession in these days. I was always excited of my work.

@Uma-Bharat-India Жыл бұрын

Good. Working with 3 jaws self centering chuck on cetre lathe. Good product. Innovative.

@armandopantoja41 Жыл бұрын

I’m 22 4 years in the lathe setup and program and this is incredible never seen anything like this love it 👍🏽

@Jormungandr666 4 күн бұрын

A fascinating way to show the relationship between rotational motion on a circle and the sinusoidal functions. By offsetting each cut, you've essentially just taken a "value" of sine/cosine at that degree mark. It gives you a discrete sine function shape across the piece, that when viewed from the top or bottom, has also encoded the angle that the cut was performed at. Terrific machinist skills showing an elegant mathematical relationship!

@allanfulton7569 2 жыл бұрын

I'm definitely going to try something similar on my homemade wood lathe. It's definitely not powerful enough for metal but this gave me an idea nothing obviously as fine or small as this but something creative

@mymechanicsinsights 2 жыл бұрын

go for it!

@darkshadowsx5949 2 жыл бұрын

pretty high chance of it breaking if made of wood but id like to see it done.

@aurorincorporated Жыл бұрын

@@darkshadowsx5949 maybe if they used very dense wood for it, it could work? Would love to hear about how the idea turned out (pun intended).

@geo525252 2 жыл бұрын

I've been in machine shops since 1974 and this is some real talent. Impressive, very impressive, and all with a three jaw chuck.

@aurorincorporated Жыл бұрын

I'd humbly state that there's nothing wrong with a 3 jaw chuck, imo. They hold on to pretty much anything (small, large, wide and the long materials), if set up correctly... as far as i've seen. Not that i've seen or used anything But the 3 jaw chuck, but that's...beside the point, right? 😇😅

@xsixinfantryx Жыл бұрын

@@aurorincorporated guess it really just depends what your doing

@Stellarffxi 11 ай бұрын

@@aurorincorporated They're not particularly good at holding square stock...

@brandondallaire 7 ай бұрын

I don't want to be mean, but what talent are you talking about? The dude offcenter the piece, and gives a quick pass at it. Any 5 years old cna do it

@micahgelfand8282 7 ай бұрын

@@brandondallaire There are 5 year old machinists? 😮

@scottym3 Жыл бұрын

I'm approaching 70. been retired for 4 1/2 years now. Started way back in 74 and that was fandamntastic. Thank you for showing that.

@sandp.7472 21 сағат бұрын

I am fascinated by 15th century ivory turnings and I have never been able to understand how they made staggered turnings like this. Now I know. Amazing.

@Vickie-Bligh 2 жыл бұрын

That was mesmerizing. I'm glad you chose it for the 8 Ball. It needed a worthy stand and you created one. When you showed those marks before, you said they would make sense and, wow, did they ever. Thanks, MM. That was fabulous.

@mymechanicsinsights 2 жыл бұрын

Thank you very much Vickie as always :-)

@david10291029 2 жыл бұрын

I could see a really cool desk lamp being made using this method on a larger stock piece, maybe cutting a pocket out on the end pieces for electronics, etc. This is awesome!

@thora8624 Жыл бұрын

incredible design. brilliantly thought out, and masterfully executed. my hats off to you for this beautiful piece of work

@randytausch3519 2 жыл бұрын

So Cool that you even THOUGHT of doing something like this. We machinists really appreciate work like this!!!!!

@bradjohnson9671 2 жыл бұрын

That was brilliant! Super complex looking but simple to execute. I never though of offsetting the jaws on a 3 jaw. Too cool..

@kiffaj9982 2 жыл бұрын

I did my trade in the 70's and I was never shown this aspect of a 3 jaw chuck. Good show sir Queenslander.

@massoudkaykha2200 Жыл бұрын

You are not only unbelievably skillful engineer, but also a great artist

@jimmypoobah8094 Жыл бұрын

I'm 81 and been machining since I was 16, never saw anything like this. Great work.

@Naetheras 2 жыл бұрын

so simple, yet complex. This is art. Not the piece itself but the video combind with the piece - the whole process. Well done!

@tarppastikkeli9405 2 жыл бұрын

This has already been watched over 10000 times, although it has not yet been here for an hour! Thank you for great content My Mechanics. 👍 Since I started to follow these videos I have bought a lathe of my own.

@mymechanicsinsights 2 жыл бұрын

Thank you so much for your support :-)

@charliebrown1828 Жыл бұрын

By far the best channels like this on KZfaq. I’ve watched a couple other so called “restoration” channels and your method and creativity are unmatched.

@jesusmejia1334 7 ай бұрын

Wow this looks very intricate and the effect it has when spinning on the lathe is mesmerizing 😮

@iexlrate1 2 жыл бұрын

Old school tool and die maker / machinist here, not only is the result really cool, but the insight to make that is outstanding, another level of imagination !!! well done!!!

@DrHutOfHandcraft 2 жыл бұрын

Not gonna lie, I got a little dizzy watching that thing spin around 😅 Very cool video, great job!

@mymechanicsinsights 2 жыл бұрын

You and me both!

@ex5080 2 жыл бұрын

@@mymechanicsinsights I can't imagine trying to focus on on that work piece, just watching this made me have to stand up and blink a couple times

@DrHutOfHandcraft 2 жыл бұрын

@@mymechanicsinsights 😂✌🏻

@MrCoolAttitude 5 ай бұрын

I've dabbled in turning before but never have I ever thought of turning something off centre. I'm def going to try this. Cheers mate.

@bobbysipes2469 Жыл бұрын

Isn't it great to see such beautiful and imaginative work. I can't keep from watching talent like this.

@johnbradford9235 2 жыл бұрын

It's so mesmerizing and yet simple - after you've shown the method - it just makes me smile. In the same way as when you see a magician pull a really cool trick. Thanks man. That really entertained and impressed me. 😎

@AAvfx 2 жыл бұрын

Pretty amazing. First I thought this is an animated 3D model done in Blender! 💖😳

@mymechanicsinsights 2 жыл бұрын

Wow, thanks!

@Wildicon19 8 ай бұрын

It is amazing what these machines can do in the hands of an artist! I learned something new about the lathe today also! Brilliant and simple way of execution!

@mrlong12u1 Жыл бұрын

Just freaking gorgeous! Amazing! time to watch again, and again, and again! Thanks!!!

@pjhalchemy 2 жыл бұрын

You never cease to amaze me with your brilliant setups! An incredibly easy way to turn offsets...with a bit counting jaw turns and of math of course!! 🤯😎 Thanks MM, beautiful piece fitting for any 8 ball!

@mymechanicsinsights 2 жыл бұрын

Thank you very much!

@serenity6415 2 жыл бұрын

When you hear people say, "Wow, who thinks of these things??", the answer is people like MyMechanics. I love it when math is used to make something beautiful like this. The beauty of science. This pedestal and 8-ball would be great to put where you meet with potential clients so when they ask how good your work is, you just say "I made those."

@Dead_Goat 2 жыл бұрын

There is no math involved in making this.

@serenity6415 2 жыл бұрын

@@Dead_Goat What's your problem? I am seriously not in the mood for stupid replies like this. I see the beauty of the math that explains shapes and patterns like this. No math? Did he just flip on the lathe and it was magically on exactly the right settings? F off.

@ducewags 2 жыл бұрын

@@Dead_Goat Scribing 18 lines, every 20deg. Yep no math in this at all, it's all magic numbers that just work, right?

@mersenne2486 2 жыл бұрын

@@ducewags its common sense. Marking lines or turning things is not maths.

@mersenne2486 2 жыл бұрын

beauty of nature. Science is not even a thing.

@dominicjose3660 Жыл бұрын

I was wracking my brain thinking how on earth you'd do that on a lathe... And once I saw it, it was so obvious I thought how did I not think of this?! Really cool...

@machobunny1 8 ай бұрын

EXCELLENT. I was needing something interesting, different, and educational to do. THIS will keep me busy for a while. THANK YOU.

@xxxdiresaintxxx 2 жыл бұрын

I guess I never thought about it but that's how they make cam shafts and other things like it. Thanks for showing us.

@mymechanicsinsights 2 жыл бұрын

Yeah pretty similar, thanks

@jamesisaphotographer 2 жыл бұрын

I came here to make exactly that comment. I’d always assumed they were welded, but this way is much more precise.

@brunocorrea6010 2 жыл бұрын

Yep, more similar to a crankshaft

@seeharvester 2 жыл бұрын

Yep.

@kj55 2 жыл бұрын

I've been machining now for 7 years and I tell you that's one thing I love about this career you can always learn something new

@ebramnady2250 2 жыл бұрын

You are working in a factory

@MrDaviddesouza 7 ай бұрын

Beautifully made. Enjoyed the process.

@wolfiemuse Жыл бұрын

Wow. This takes experience, knowing what your machine is capable of, plus a ton of practical knowledge (ie the whole setting up with height gauges and making marks to know to turn the part 20 degrees each time) to achieve. I’m fresh out of trade school and Ive realized there is so much that you don’t learn in trade school. I’m at a small job shop trying to learn every little bit I can and like uploading time lapses of what I’m working on, but this is next level

@AkaizWoof Күн бұрын

Absolutely! It's incredible to see the level of skill and precision involved in this work. I completely relate to your experience - trade school provides a great foundation, but there's so much more to learn on the job. Keep pushing yourself and sharing your progress; it's inspiring to see others grow in their craft

@mrdmahesh 2 жыл бұрын

Mindblowing craftsmanship!! Simply amazing!!

@Earth313n 2 жыл бұрын

Simple and exactly what you need to say. What a great comment.

@mymechanicsinsights 2 жыл бұрын

Thank you very much!

@CannaSama Жыл бұрын

I've been a turner for over 6 years and never seen this one before!! You're such a genius!!!

@kray97 2 ай бұрын

I worked in a couple labs after I graduated from college, one of the cool skills I picked up at one of the labs was a Machine Shop certification. And I can't believe how much fun I had when I was in the machine shop with a lathe.

@budaniamanish5177 2 жыл бұрын

Love you work sir❤️. Its just awesome and addictive.

@mymechanicsinsights 2 жыл бұрын

Thanks :-)

@conrailfan6277 2 жыл бұрын

For me, I've been subscribed to your channel for 2 years now, your talent with the lathe is still incredible to watch!!

@mymechanicsinsights 2 жыл бұрын

Thank you very much!

@tomburbridge1114 11 ай бұрын

Yes VERY TOP notch work. A smart person is smart, A smart person with an imagination is unstoppable !!!!!

@francispalmer9737 2 жыл бұрын

Wow, now that is what I call exceptional lathe work. Never seen that done before. Cheers dude

@mymechanicsinsights 2 жыл бұрын

Thank you very much :-)

@SasiKumar-pz4zk 2 жыл бұрын

OMG the coolest project i have ever seen!!! Spectacular 🤯🤯

@mymechanicsinsights 2 жыл бұрын

Glad you think so :-)

@ralflisell3287 Жыл бұрын

Absolutely beautiful! Idea, manufacturing and editing of movie - all great!

@BakeBakePi 7 ай бұрын

It looks so cool! It's so interesting how you created it!

@DervishD 2 жыл бұрын

WOW. I have to admit that I don't know that many professionals of lathering but you are a true master. Not only because obviously you know how to handle a lathe, but also for the incredible designs you imagine and THEN do with your lathe. I'm wordless, really.

@sleepCircle 2 жыл бұрын

You are without words.

@DervishD 2 жыл бұрын

@@sleepCircle Thanks for the correction, English is not my mother tongue. Still, can't see a huge difference between "wordless" and "without words", I've seen both in writing, but obviously I was missing out something from the context because on my mind both are equivalent. Could you please elaborate? I know this is not the best place but still 😇

@hankkingsley9183 2 жыл бұрын

@@DervishD I believe it is not that "wordless" is incorrect, per se. But this is a common turn of phrase, "I am without words" is what one would expect to hear in such a usage.

@DervishD 2 жыл бұрын

@@hankkingsley9183 Oh, that I can understand, thanks a lot for the explanation 😊 Curiously enough, "I am without words" is more or less literally what we say in Spanish, but to me it sounded worse than "wordless". Always learning, I suppose! Thanks again!

@KohlenKumpel 2 жыл бұрын

@@DervishD speechless may be better than wordless, heard this phrase a lot

@daveawb 2 жыл бұрын

I do love your lathe work, always coming up with some really great designs. Just thinking out loud but two of these could be made into a single double helix… that’d be seriously cool!

@mymechanicsinsights 2 жыл бұрын

Yeah indeed, but that might be a two parter

@lelandbradley1076 2 жыл бұрын

@@mymechanicsinsights Two parter, double helix. :D

@daveawb 2 жыл бұрын

@@mymechanicsinsights for sure it’d be a two parter but if anyone can make it look like it was just one… that’d be you for sure.

@chrishb7074 2 жыл бұрын

Could you make two identical copies then slice off opposite halves of the disks at each end to make them both semicircular and out of phase with each other. Then interlace the two parts and bond it together at both ends. The single helix is pretty spectacular.

@kumoblade Жыл бұрын

Human Ingenuity will never cease to amaze me. Fantastic job.

@Yammenkow Жыл бұрын

Beautiful piece! A work of art, mesmerizing to look at still or in motion! I love 2:16 where the center seems to stay still.

@Salemd11 2 жыл бұрын

I have been waiting for a new video . Ich mag deine Arbeit . Es macht spaß.

@mymechanicsinsights 2 жыл бұрын

Tausend Dank

@salomao1971 2 жыл бұрын

Isso poderia ser um troféu digno de qualquer torneio de Tênis ( grand slam ) , ou campeonato brasileiro de futebol . Uma obra de arte .

@relaxingstuff5372 Жыл бұрын

Class! Very easy to do but with great results. Never thought of anything like that. I'll do it with my trainees!

@ThomasGriffin-zn1rr 23 күн бұрын

At one point I thought I was being Hypnotized! Great Work!

@djosbun 2 жыл бұрын

Looks like a miniature Formula 1 trophy. Very cool!!

@mymechanicsinsights 2 жыл бұрын

It does!

@smallshoptalk589 2 жыл бұрын

That was so cool and I am thankful for the work you put into it. I was wondering where the 8 ball was, then, there it is!. I don't have a stand, I make a new one. Very original. Thank you.

@EricIrrthum Жыл бұрын

this is when you have the knowledge. my respect for this man!!

@timothyjacksondrake4454 Жыл бұрын

I had never thought of off setting the jaws themselves. That is one thing I love about metal working, there are so many interesting techniques to learn.

@chrismadaj8751 Жыл бұрын

Yes, you don't think about a lot of simple stuff until you see online totally agree GODSPEED

@plummerboy170 2 жыл бұрын

DEFINITELY the best channel on KZfaq by far very cool

@mymechanicsinsights 2 жыл бұрын

Thank you very much :-)

@TrophicFault 2 жыл бұрын

I feel like this would make a good "windmill" (wind chime* , thanks "murk 135") type thing attached near a window with a string. Very cool project.

@murk1352 2 жыл бұрын

Did you mean wind chime???

@TrophicFault 2 жыл бұрын

@@murk1352 yes sorry lol. Thanks

@murk1352 2 жыл бұрын

@@TrophicFault I thought that’s what you meant…👍🏻

@devincummings8137 Жыл бұрын

This is the wildest machining I've ever seen. This guy has skills!

@ampglass 5 ай бұрын

Lovely ASMR, I appreciate hearing this process as much as seeing it. Nice work.

@UniverseUA 2 жыл бұрын

You're incredibly talented

@mymechanicsinsights 2 жыл бұрын

Many thanks :-)

@PeterColmore 2 жыл бұрын

That is really cool, I love it. You are so clever

@mymechanicsinsights 2 жыл бұрын

Thanks so much 😊

@mxcollin95 27 күн бұрын

Wow…epic design and creativity! 👍

@saintkenny9296 Жыл бұрын

Wow, the things you can make on a Lathe. That is without a doubt some serious mad 😡 skills! ❤

@EduardoGamboaQ 2 жыл бұрын

Amazing work!!!

@mymechanicsinsights 2 жыл бұрын

Thank you!

@marcioaraujo5317 2 жыл бұрын

Excelente obra de torno, digo, de arte. Nota bilhão.

@brucefreedman3655 Жыл бұрын

That is just WICKED!!!! I remember your 8 ball video too!!!

@gary-phillips 7 ай бұрын

This is Incredible. Using a standard lathe too and old school measuring,. Great Job!

@rjlinnovations1516 2 жыл бұрын

Excellent idea with skills involved with this kind of project. Good job and I admired your talent. Thanks for sharing your video. I subscribed your KZfaq channel to support your work of creativity 👍. Greetings from Canada 🇨🇦

@mymechanicsinsights 2 жыл бұрын

Thank you very much!

@rjlinnovations1516 2 жыл бұрын

@@mymechanicsinsights you’re welcome 🙏

@rjlinnovations1516 2 жыл бұрын

@@mymechanicsinsights you’re welcome 🙏

@davidashmore3929 2 жыл бұрын

Excellent stuff Sir

@mymechanicsinsights 2 жыл бұрын

Thank you kindly

@user-kv2jg9vv6o Жыл бұрын

You really make iron play a symphony that pleases the eyes and the soul before hearing, well done

@kennethsmith3260 Жыл бұрын

That strangely mesmerising. Turned out great and simple enough to make. Well done..

@Raisopod 2 жыл бұрын

Making two of these that interlock together to make a double helix would be really interesting to see and probably an equally exciting mathematical engineering challenge.

@constancemiller3753 2 жыл бұрын

I thought it looked like a DNA strand.🧬cool engineering traits unlocked.

@patrickhector 2 жыл бұрын

It's not all that complex- make a similar helix, thread it in, make sure it's 180 degrees out of phase and you've got a double helix

@justintasht1067 2 жыл бұрын

Absolutely fantastic such skills

@mymechanicsinsights 2 жыл бұрын

Thank you so much :-)

@riadenchong770 Жыл бұрын

I never knew that the Jaws could be rearranged like that on a lathe.... Thank you for showing me this it was an educational experience thank you so much

@BensWorkshop Жыл бұрын

That is quite interesting. I suspect that many people would really struggle to work out how to do that, and would require drawings and so on. However it turns out the method is astoundingly simple. Thank you.