Making a Curved Double Lock Standing-Seam Copper Roof

Рет қаралды 156,916

11 жыл бұрын

Double lock standing-seam metal roofing is specialized enough, but making it fit a curved roof surface is even more specialized. This is demonstrated by Chris and Anthony Paulin of Paulin Slate and Copper of Akron, Ohio, at the Slate Roofing Contractors Association 2012 conference in Grove City, PA. Filmed by Joseph Jenkins, author of the Slate Roof Bible, 3rd edition (www.slateroofwarehouse.com/Sl....

Пікірлер: 88

@davidleversha4898 Жыл бұрын

Americans are very generous when it comes to sharing skills and knowledge.

@christopherpaulin5548 Жыл бұрын

We learned from Europeans: many others are generous as well

@christopherpaulin5548 9 жыл бұрын

I am the instructor. Many thanks to Joe Jenkins for both hosting an excellent conference, and filming, editing and posting the video. Unfortunately Kaszia, while the RBM works very nicely, it will not do compound radii, or a radius as tight as we usually see at the midpoint of the "swoop".

@klenktools Жыл бұрын

Thanks for your long-time support of Klenk tools! This video is awesome :)

@christopherpaulin5548 Жыл бұрын

Thanks for making great tools

@peterspano4550 2 жыл бұрын

From this second generation roofer you are craftsmans at the highest level. This old dog just learned some new tricks 😆 Thank you gentlemen

@christopherpaulin5548 Жыл бұрын

Thanks for the kind words Peter

@faber384 11 жыл бұрын

Beautiful! Much better workmanship than other videos I've seen on KZfaq. Copper work like this is a dying art.

@lukehughes9026 Жыл бұрын

Very good

@christopherpaulin4886 Жыл бұрын

Thanks for the nice comment

@chrisbrown0713 8 жыл бұрын

from a fellow sheetmetal roofer, job done well. true craftsman of our trade.

@ericnagy8056 2 ай бұрын

Mad skill.True artist

@chrismoody1342 2 жыл бұрын

👍 I’m a smith myself, fabricated and installed on many historical buildings, churches, clock towers, high end home goodies. Everything from flashing, chimney crickets, gutters, scuppers, downspouts, cupolas, gazebos etc.

@suhwateezea.214 Жыл бұрын

Need a sales guy?

@eprofessio Жыл бұрын

I have watched a couple different craftsman do this roofing and the difference in craftsmanship is completely different.

@zephyrguzman6462 3 ай бұрын

Thanks for the stretcher stand idea

@calwilliams63 2 жыл бұрын

Excellent work, gentlemen….. I use to do a lot of copper work and learned quite a bit from this video, thanks!

@gregwarner3753 4 жыл бұрын

Great setup for the metal shrinker.

@bobmcalister 11 жыл бұрын

nice to watch a real craftsman at work . thanks for sharing !

@tinmantech 8 жыл бұрын

Way to go, guys. I love your setups and effective methods. Bravo! Make it happen!

@davidcantrell9870 4 жыл бұрын

Beautiful craftsmanship, greatly enjoyed seeing your work.

@richc9503 6 жыл бұрын

Great video, Thank's for taking the time to make it.

@aJEEPforthebirds 8 жыл бұрын

Nice job, I am currently installing an lcc standing seam barrel roof. I like the tips I get from this video

@davidbush8306 10 жыл бұрын

Nice workmenship,keep up the great Work!

@JoeBakerOutsideTheBox 9 жыл бұрын

Wow! true craftsmanship, laborious, thanks for sharing

@JennKota 8 жыл бұрын

This is really nice work. We deal with a lot of bending tools like Wuko....it's nice to see how it is done by hand.

@alittlemoore1 5 жыл бұрын

Great video. I do a simular profile for the top. Haven't done double seam for curved panels. I do a cap seam with top and bottom ends folded and soldered.

@Nutintoitbut2doit 11 жыл бұрын

That is cool you guys have a traing class to master your craft. Great work

@roofermarc1 Жыл бұрын

Nice work. We just do a single, no one wants to pay more for the double lock.

@christopherpaulin5548 Жыл бұрын

Doesn't take much longer to do the double. Go for it

@JamesGodish 11 жыл бұрын

Wow. That's great. Little confused about the copper/flashing at the top.

@MandMconstruction 11 жыл бұрын

Very nice.

@copper2932 6 жыл бұрын

How many old guys in the crowd passed away during the making of this one bay roof? Great workmanship , great deal of time!

@jeboccuzzi10 10 жыл бұрын

200 year life. Nice.

@onetwothree4148 Жыл бұрын

Not with the shit in our rain...

@titanpat57 7 жыл бұрын

great job guys...thanks for taking the time to share...any tips on a "hip" variation that returns back into the house?...thanks

@christopherpaulin5548 7 жыл бұрын

Great question. The answer is in the British CDA details, found here free of charge: copperalliance.org.uk/resource-library/pub-156---copper-roofing-in-detail Hope that helps-

@joenavanodo3780 9 жыл бұрын

I only wish my Father were here to see this craft

@frankch25 11 жыл бұрын

Nice

@aJEEPforthebirds 8 жыл бұрын

And good setup,my boss is a jerk always rushing me, so I can't find the time to setup properly

@klempnereiunddachdeckereis3997 2 жыл бұрын

nice Video, look at my copper shingles✌👍

@kellyrobles6702 8 жыл бұрын

can you show photos of how you built the curved frame?

@user-zj5xn8cz9j 8 жыл бұрын

красиво ! Руки на месте.

@christopherpaulin5548 7 жыл бұрын

Спасибо

@va8ko8 8 жыл бұрын

Сейчас так не делают( много часов работы( а результат отличный!

@christopherpaulin5548 7 жыл бұрын

Спасибо

@randy1896 7 жыл бұрын

Ty for taking the time out to record and show,Q1 How do you figure the material length before you shrink it ?

@christopherpaulin5548 7 жыл бұрын

Hi Randy, and thanks. We simply lay a flexible rule or measuring tape down on the deck surface of the curve to be clad. Hope that helps-

@xuv224 2 жыл бұрын

That is beautiful work! Would you mind telling where the seaming tools can be bought? I looked at Slate Roof Warehouse but could not find these. Thank you.

@jcjenkins01 2 жыл бұрын

There are numerous places online: www.eastwood.com/metal-fabrication/shrinker-stretcher.html www.amazon.com/VEVOR-Metal-Stretcher-Shrinker-Capacity/dp/B0972SLPNG/ref=sr_1_6 www.stortz.com/product-category/roofing-tools/sheet-metal-roofing-tools/standing-seam/lancaster-shrinker-stretcher/

@christopherpaulin4886 Жыл бұрын

Thanks for your comment. Stortz and ESE Machines carry the seaming tools I'm using in the video

@kineticinstallationspecial5775 9 жыл бұрын

how a double roll lock is done.. son

@jeffabercrombie167 5 жыл бұрын

good till the next hail storm, lol

@brianholt7733 5 жыл бұрын

We are doing a similar project. Can you tell me where I can purchase the radius dollys? Or at least the brand so I can search. Thank you for your time

@christopherpaulin4886 4 жыл бұрын

ESE Machines 002C, here's the link: www.esemachines.com/hand-tools

@brianholt7733 4 жыл бұрын

@@christopherpaulin4886 Thanks

@sharonzambrzuski9209 Жыл бұрын

I wish I could find someone in my area of NE Oklahoma that could do this. I've searched a 3 state area and ....zip

@christopherpaulin5548 Жыл бұрын

We travel, give us a call to discuss your project

@jcjenkins01 Жыл бұрын

Check slateroofers.org. Look at the member map or the contractor directory.

@kasziamaszia114 10 жыл бұрын

Try RBM :)

@mateuszsz8548 5 жыл бұрын

where can I buy such an apron?

@christopherpaulin4886 4 жыл бұрын

grab a wide belt, pair of 4 pocket side bags, and a hammer loop from home depot or lowes or your favorite store and you're in business

@carlpeterson1691 Жыл бұрын

How do you finish the bottom of the seam?

@christopherpaulin5548 Жыл бұрын

In general accordance with UK CDA Publication 156, Copper Roofing In Detail, 22-27

@reynaldogarcia643 2 жыл бұрын

What's the name of the tool that forms curvature? Cheers

@jcjenkins01 2 жыл бұрын

Shrinker-stretcher.

@asenciotacuri9184 2 жыл бұрын

Name of this machine please

@jcjenkins01 2 жыл бұрын

shrinker stretcher

@gerttarnu8545 10 жыл бұрын

@danielk8926 7 жыл бұрын

I know the guy who is wearing white hardhat. John

@fila32 9 жыл бұрын

What are you Antiquing while you're installing it? Geesh, that's a lot dings on the side panel. Not good.

@kineticinstallationspecial5775 9 жыл бұрын

you won't see it in 3 days in Ohio and nothing was a tear so quit with your trolling

@christopherpaulin5548 8 жыл бұрын

+fila32 Yep. Using old fashioned seamers on a shifty mockup to show how it's done, because there are some applications where the new fangled folders just don't work. I'm always up to to learn new techniques though! Where's your video showing your better work? I'll check it out.

@suhwateezea.214 Жыл бұрын

I wish Mexicans were this detail oriented.

@cegan04 9 жыл бұрын

WTF!!!! A DOBBLE PONYTAIL???????? Wow.... i never imagined anything worse than a ponytail.... but its 2 pony tails

@sheep1ewe 8 жыл бұрын

+Conor Egan i will wear 3 only for You sweetie... :D

@florenki21 8 жыл бұрын

Why ur delete my coment shame

@jcjenkins01 8 жыл бұрын

nobody deleted anything, other than a spam link a week or two ago.

@kopynd1 7 жыл бұрын

like the man said, buy american made tools, nice job

@fila32 8 жыл бұрын

You know I thought I'd watch your video again, just maybe I was to hard on my criticism. Well I was right that was a real Amateur example of installing a Sweeping Dormer Roof Panel. All the marks left behind were unacceptable. So I'll stick to my original comments.

@christopherpaulin5548 8 жыл бұрын

+fila32 Where's your video showing your better work? I'm always up to learn new techniques!

@Dollarvr7 7 жыл бұрын

I do mine very similar to this, those marks go away as soon as the patina process starts, but I am very interested in a way to do mine better.

@fila32 9 жыл бұрын

If you don't like criticism do it right . I guess it's "Hack Town Ohio USA"

@christopherpaulin5548 8 жыл бұрын

+fila32 Not sure exactly what point your comment is addressing, but we are far from hacks, and I'm always open to learning new and better techniques, so post a video of your work in process and I'll check it out..

@kingofepicvlogs4666 4 жыл бұрын

fila32 - why are you such an insecure ass? Post a video of your supposedly superior work and we’ll tear that shit apart