In this video I do my best to make a Roll Pan for the ranger out of some old shelf bases I had in storage
Пікірлер: 18
@joshmcdonald75992 жыл бұрын
Loving the Ranger build! Keep up the good work. You are doing great!! Just subbed so I can follow along easier.
@paule012 жыл бұрын
Thanks I appreciate it!
@Snack592 Жыл бұрын
Just came across your tailgate build and it got me on this video as well. Love your vids.
@paule01 Жыл бұрын
Thank you 🙏
@brad5316 Жыл бұрын
You do great work! Thank you for your video series!
@steveadams5190 Жыл бұрын
Great job! 👍
@paule01 Жыл бұрын
Thank you! Cheers!
@agpascual7991 Жыл бұрын
Clean work!
@paule01 Жыл бұрын
Appreciate it
@agpascual7991 Жыл бұрын
@@paule01 im currently building one myself. Hoping it turns out good
@paule01 Жыл бұрын
@@agpascual7991 Nice! Just take your time and Im sure it will come out great
@anthonyrobin8070 Жыл бұрын
I would’ve left the little holes and put LED directional lights. Fire work tho.
@paule01 Жыл бұрын
Thanks and that's a pretty good idea as well
@MrSirjud012 жыл бұрын
Looks like you did a series of tack welds, was that to keep warping down? Why did you use the hammer to make the bends and not the break?
@paule012 жыл бұрын
Yes, its better to tack everything first before you fully weld it in. It keeps things from moving as much. And I had to use the hammer to make the 2 side bends because once I made that first bend it wouldnt fit in the brake anymore. Only if I had a finger brake that would work.
@MrSirjud012 жыл бұрын
I mean when you fully welded it in, I understand the tacks to hold it in place, but it looked like you did tack after tack all the way down the panel. I might be wrong, but was wondering if you did that for warpage. I realize the last bend without the fingers would hit just thought you would do the 2 bends that you could do, amd get as far as you could with the last and finish it off with the mallet. Either way, it came out great looking. Looking forward to the install video. I have a '74 Dodge D100 that I'll be doing this with as well
@paule012 жыл бұрын
Ah yes, In the video it doesn’t really show how I welded it in but I did jump around and make small weld passes. Not exactly tack after tack but around an inch or so at a time. It did help with warpage. And you’re right, I could of started the 2 last bends with the brake and then ended with the mallet but most people don’t have a brake so I figured it would be good to show how to do it both ways from the start. Hopefully the install video will be done soon, I got an awesome deal on a finger brake that recently I’ve been making a stand for but once that’s done I’ll be back to work on the ranger. Good luck with your d100 tho, I’m sure it will turn out great
@MrSirjud012 жыл бұрын
@@paule01 gotcha! Thanks for the reply. Truck looks awesome!